Hope this helps you out when ordering! We got a ton of extra to add to this next week too! www.flyryde.com/jewels
@coupedevylle3 жыл бұрын
What do you think this would look like on a crown victoria
@missrachel23 жыл бұрын
Please help I want to make my ilx headlights change colors flash etc
@missrachel23 жыл бұрын
How are those running lights yellow and moving back and forth
@teligon3 жыл бұрын
"Trinidad & Tobago". Pronounced Tuh-bay-go. :) Thanks for putting this video together. I absolutely looked forward to this..
@marcfigueroa323 жыл бұрын
How much would you charge to do this for a 2015 Hyundai Sonata
@timshields41483 жыл бұрын
I love that you’ve included actual customers that have paid others to do similar builds to this. Furthering how you share yours and other’s experiences so that people can learn what to do and not to do.
@avguylyfe58373 жыл бұрын
That's why I just brought the morimoto jewel headlights. Nothing to worry about and it's back by warranty. And pretty much self explanatory on installation
@2008guelo3 жыл бұрын
Yeah u made the right choice I bought mines from "Alpharex USA" Nova jewel , I had it for over a month and the only problem I had was the cut off line was a little low but it comes with an adjustment screw so everything is great now😎 ( I paid $1,200 and comes with 2 years warranty )
@RC-rg3vz3 жыл бұрын
Love your videos, trying to learn as much info about wiring, measuring voltage and all that fun stuff so I can confidently work on my Ford Fusion’s headlights Gonna add some sequential leds inside the housing
@flyryde3 жыл бұрын
Have you found Matt Young’s channel yet?
@RC-rg3vz3 жыл бұрын
@@flyryde I haven’t yet but I’ll definitely check it out!!! Thank you so much!! Edit: was unable to find him ox
@2008guelo3 жыл бұрын
Love your videos the 1 thing I love about mines is that I could adjust them at first I didn’t know why 1 of mines had a lower cut of line than the other until I watched your video and I found out On some u could adjust them , now they are perfectly aligned Thank You 🙏🏽 Keep up your great work.
@speedisf3 жыл бұрын
I love all the works you do on the car headlights great job
@flyryde3 жыл бұрын
🙏
@slade-runner67733 жыл бұрын
I have a theory on how to properly align them horizontally. You would have to basically make an adjustable fixture to bolt up to the headlight body. Turn it on and shine it on the banner for aiming headlights, and adjust the fixture to line up properly. You keep that fixture locked to where it's at and (in theory) be able to use it to set up the jewel eyes angle. It may only work for projector type headlights with the clear line pattern.
@WolfPackPerformance3 жыл бұрын
Steady solid content!💪🏾💪🏾
@personalprivilege69923 ай бұрын
Great video
@johndittmann90143 жыл бұрын
As an interesting side note, In 1977 Porsche developed a headlight leveling system for Euro-Spec 928s that allowed the driver to fine tune the beam to compensate for changes in weight & weight distribution.
@VictorNUribe3 жыл бұрын
Can't wait for the how to video, lucky for me I got my tlx donor lights for free because of broken tabs. I have an extra set of tsx aftermarket lights that I plan on setting the jewels in them, do you think aftermarket headlights housing would be a good platform?
@Eilidh_Maclean173 жыл бұрын
👏👏 liked that a lot good video Chris ✌️
@keithpoley34323 жыл бұрын
Builder Killer haha that's funny I like that. I love doing challenging builds, but these are intimidating.
@flyryde3 жыл бұрын
I’m kinda over the challenge of the build. At this point I’m challenged to get the content, make it valuable, build the courses, learn what everyone is working with, etc. the challenging builds I’m alllll the way uninterested in doing myself lol. That’s why I just want to feature other specialized builders 👌
@keithpoley34323 жыл бұрын
@@flyryde I look forward to your DIYs when I see something I haven't done yet. I can usually always figure things out myself, but it's great when someone else has already gone through the trouble and made a DIY. Gives me a jumpstart for future client builds. So thank you for doing what you do Chris. I have found that clients attempt things, fail terribly, and then come to us anyways lol.
@baezn883 жыл бұрын
Great vid. Thanks. Keep it up
@bikingmoments3 жыл бұрын
It would be nice if you can show other Acura’s Jewel Eye LEDs! Other than the old RDX/TLX’s 5-unit eye with either reflector or projector high beam, The ILX has a 7-unit eye; The RLX has a 4+4 bi-pupil eye; The new RDX has a 7-unit eye; The new TLX/MDX gets a 4-unit eye!
@Euxable Жыл бұрын
The reason for this is the entire housing emptied out might not fit them, as you can see in the video his headlights are pretty much all taken up with 5, would need to be into the turn signal area and an alternative done like strip signal
@christianbenson2223 жыл бұрын
Thank you
@douglaswilliams17924 ай бұрын
I have a TLX. Why are the 10 headlights shifting from 6 to 4 to 10 illuminated all under AUTO?
@flexoffender58084 ай бұрын
2013 Acura TL jewel headlights.
@jasondebraux6695 Жыл бұрын
Nice video. Do you know anyone that builds infiti tailights?
@NocturnalHabitsCo3 жыл бұрын
Pretty good video! If any questions, I’d love to answer them!
@gabbermitch3 жыл бұрын
Great videos can't wait for more I still need to squeeze the jewels in my crx headlights no idea how but I want it 🤣
@agaad223 жыл бұрын
I would really like so do this on my Honda Pilot Elite headlights that come with reflector LEDs.
@ride4chevy Жыл бұрын
Damn good content everytime! TY
@samlung27242 жыл бұрын
So I assume no other company ever thought of making their own iteration of jewel lights? Id even take that multi led reflector from the newer Hondas
@JoseTorres-nv6qd2 жыл бұрын
Do have one for a 2009 honda accord coupe exl
@mikepetersons13192 жыл бұрын
even at $2,000 it's a good deal. most top tier aftermarket headlights like alpharex or morimoto and recon cost $1200-$1700 a pair. so getting one of a kind custom headlights for $1500-$2000 is worth it, if you have the right builder. great content love the channel
@FlexSZN232 жыл бұрын
Morimoto and other brands offer warranty tho, idk if a builder would offer warranty.
@jasondebraux6695 Жыл бұрын
@@FlexSZN23 Does Morimoto make custom build headlights for customers or only what they have advertised?
@deancore70652 жыл бұрын
@flyryde could you do a golf MK6 tail lights and headlights for me or even price em?
@JWard23 жыл бұрын
Hi Flyryde how do we reach you for custom Sequential LED strips that can do: -red brake light -Sequential Amber turn signal -white back up lights All in one "tube" the thing that scatters the light to make it look uniform & not see the individual LED?
@flyryde3 жыл бұрын
I think we’re closer than ever before to getting products available that don’t suck, but at least cover the bases you mentioned pretty decent. But… as of now I don’t have a silver bullet for you. The fact that there’s no good option for OEM level output for even a white LED strips that are flexible is sad.
@JWard23 жыл бұрын
@@flyryde understood. And thank you for replying. If it helps, they don't need to be flexible. They will be placed, with 3m tape, on the back of my Jeep Wrangler.
@flyryde3 жыл бұрын
It’s everything from the external mounting, to the form of sequential technology, to the space available. I could (but don’t offer my service) build an overly complex red strip setup with Amber and White sequential stripz from Yunique LED. But the hassle is the housing, the programming, the hardwiring…. and the subsequent cost for the time needed to hand make something that 99 out of 100 Jeep or truck guys would think is “basically the same” as their 50 dollar Amazon special version. Like, I could probably find some rubber specialist to make me an extra custom one off tire, and pay $10,000 for it, or I could pay 47 bucks at Walmart for the same size made by Douglas (whoever the hell Douglas is?).
@JWard23 жыл бұрын
@@flyryde Excellent metaphor and I see what you mean now :) Thank you for your time.
@sherylann05082 жыл бұрын
I've just started watching this channel and it's making me want to get new headlights for my Sentra Se-r SpecV 2012. I don't know exactly what I want, I just want them to be looking more modern and less boring. How do you design them/where could I find ideas? Any help is appreciated 😅
@dustincianci55672 жыл бұрын
What these usually run. Lookin for a set on my 08 type s. Lmk thanks.
@keithpoley34323 жыл бұрын
Is there any build or mod that you've wanted to do, but have never been asked to build?
@flyryde3 жыл бұрын
I know crystal clear what I want people to want, so that’s what I show them, and that’s what I sell them. The big shift for me now, is applying that to the online courses. There’s a lot I haven’t shown that I want people to want, which just means I have lots of work ahead of me 😬
@keithpoley34323 жыл бұрын
@@flyryde Yeah not gonna lie Chris, I've learned a lot from you. Id had experience in the past but it was your videos that made me want to do this for a living. I like doing the crazy stuff like making entire interiors RGBW Bluetooth. Even the super hard stuff like German cars. But I've learned that it takes too long to do them and it's too time consuming. That's my problem Is I LOVE challenges.... but the challenges don't make the money because nobody wants to pay for the hours. I think it's smart of you to do all these DIY videos because there's so many people out there that have no idea where to start. But you can't supplement the years of experience, yet you make it practical and to the point. I feel like if I knew nothing, your videos would get me to the finish line regardless of the years needed to break the mind barrier of what's possible because most people just want 1 simple modification. I wish I lived closer to you man so I could pick your brain and learn from the best.
@OmarAlobaid5 ай бұрын
Will it fit in honda accord 10th ?
@FlexSZN232 жыл бұрын
Which would be brighter and provide more forward lighting, a Bi-LED projector or these jewel eyes? Is there much difference in terms of width & distance, thanks.
@ste60003 жыл бұрын
i'm think of these lights, but mishimoto and hero makes these for camaro by design. any thoughts on why you wouldn't want to do it when they are made via production sales?
@samuelcarter48313 жыл бұрын
QUESTION: How can I connect led lights in my car to come on when I unlock the car with my dome light and also be able to turn on with the fog lights as well?? ..... HELP!! 😩
@stevenford28893 жыл бұрын
Can you do jewel eye headlights on an 09 Cadillac CTS?
@missrachel23 жыл бұрын
I have a ilx how do u make them change colors etc please
@missrachel23 жыл бұрын
How is that light doing that I have a ilx Please help I want my ilx to change colors
@Jr01atlTech3 жыл бұрын
Can you make one for a 2012 Acura TSX
@hubertsaw99582 жыл бұрын
What about high beam?
@murthykumar72 жыл бұрын
Were can I buy that jewel eye
@jazrer94343 жыл бұрын
Is that tester box/suit case premade or diy?
@link9alink9a712 жыл бұрын
In the news start to speak about the led lights do they blind the people ? Because too much complain about the bright light from those lights ... will yes because some people doing custom like these lights without thinking... just to be cool ohh yaaa .
@mrrob58513 жыл бұрын
If I may ask how hard would it be to fit s2000 projectors in place of my Hids on my 2010 legacy???
@timtidwell13553 жыл бұрын
Looking for a great set of light for wife car and my sons car?
@aeextreme2 жыл бұрын
Do you have any for a ford fusion 2016
@96ej3 жыл бұрын
Hey Chris any idea on how the depo jewels etc aftermarket headlights compare to oem Btw good vid!
@flyryde3 жыл бұрын
Thank you. What vehicle does DEPO make Jewel Eye headlights for?
@96ej3 жыл бұрын
@@flyryde afaik mdx
@flyryde3 жыл бұрын
I’ll reach out and ask DEPO if they want to show us what they got!
@96ej3 жыл бұрын
@@flyryde I know it's a long shot but it would be super dope if they would just sell the parts we need to retrofit
@jeyautoaccesorios22142 жыл бұрын
Tienes que ponerle sustitulos en español a los videos
@FightingNavyman3 жыл бұрын
hey FlyRyde how much for some jewel eye headlights for my Kia Rio 2014 O_O
@nigelbassett37913 жыл бұрын
“This is expensive” I’m looking at 2,000 dollar LED taillights. 1,800 for these would be a dream
@flyryde3 жыл бұрын
I personally believe that a reputable builder for Jewel Eye headlights should be 2-5x what number we discussed here. This should be a top tier price that 999 out of 1000 would never pay.
@nigelbassett37913 жыл бұрын
@@flyryde I agree. Just listening to the amount of retooling sounds like a lot
@lancescott76203 жыл бұрын
When do orders get shipped? I ordered stuff over 2 weeks ago and it still says order placed
@flyryde3 жыл бұрын
I see a brake flasher from the 16th. Switches came in over the weekend after we burned through what we had on hand. We got them ready yesterday but I ended up working on the video till 7pm. You should see your tracking now.
@lancescott76203 жыл бұрын
@@flyryde yep. Got it! Thanks. love your videos. I’m an led fanatic. Any car or vehicle I own goes straight to all led. Lol I don’t know if you’ve done it before or would do a video of this but I would love to see the led 350z taillights with the ghotz kit on it. Just throwing that out there
@sethlinerode10472 жыл бұрын
I have a 2002 Chevy 2500hd and want jewel lights in the top and bottom headlights on each side is that possible I also live in NE Ohio can anyone recomend a builder in my area I also in the process of building a vehicle performance/fabrication complex basically a large group of buildings where each building has it's own specialty and there own business but we all work together but have their own businesses but are part of one big group we even design manufacturing machines for our designs and have Patten lawyers and financial people as well as multiple wharehouses for each specialty our own indoor scrap yards we plan on doing custom builds having a specialty vehicle dealership and aftermarket line even handling shipping it's by Akron Canton airport so we can run our dynos and wind tunnel testing also looking at facilities in Cleveland and Columbus I am mainly focused on trucks from.3/4 ton to class 7 but we do cars and large SUVs as well I am also expanding into raw materials and dealerships as well both medium duty truck, trailer, boat, and campers we are also involved in shipping, wholesale, military surplus, air gas station, and want to Branch out into eltronics we have one main building is all corporate like paperwork so that doesn't distract from the creative process we don't have a name yet but do make custom tires and wheels as far as tread size and material we also build custom engines and do custom engeering there are loft living and meeting quarters above each building and there are also proving grounds and planning on adding more also we make and design guns and have a shooting range it's also part of an airport so if you want to fly that is an option as well we also have passive income streams from 1800s compounds and rentals so please give us a look
@mistere5993 жыл бұрын
if u from trinidad wds
@franchisefred4066 Жыл бұрын
No thanks. I’ll stick with my LED bulbs. 6k super white and the halogen turn signals are good enough for me 😂
@Timbuck43 жыл бұрын
Just buy a TLX lol
@vatikan1da3 жыл бұрын
Your negative dude is like you thought of everything that could go wrong I see a lot of ppl with custom jewel lights you will never get too far with your mentality