Respect for not just telling how it should be done but actually removing lights, adjusting, reinstalling and showing. 👏

This video was a huge help! When I originally installed the LED bulbs in my projectors I did notice the light output and pattern seemed offset. But assumed that’s just how they are since it’s not HIDs. And then when I saw this video about LED bulbs oriented to 9 & 3. I went back to check my bulbs and sure enough they were unaligned. So I had to readjust them to 9 & 3 position. And now the light beams look just like your example of properly aligned bulbs. Thank you and God bless you Po! 🙏🏼

You might have been the only person that has helped fixed my wife's car. I'll try to update after it's fixed. Thank you for actually explaining things

Awesome! Thank you for sharing this information on LED bulbs. Just bought LED headlight bulbs and will have it placed to the 9 to 3 orientation. Salamat!

I have had a few different LED bulbs that were clockable, wasn't too fond of most of them as the design would allow them to slip out of adjustment when being installed because of the mounting tabs sometimes not being in tolerance with the housing slots, and causing the locking collars to slip. As someone who test out various lights myself, I know about clocking, but for those who don't, you have made a very educational, informative video. Not everyone who makes a video on KZfaq knows what they are talking about.... thanks for helping people by being someone who does. 👏

Interesting video! After installing new LEDs for my projector headlights, I noticed it was misaligned. This video helped me how to align my LEDs better :)

I tried using the 9&3 headlight setting on my Civic UFO, and while it did make the road brighter for me, I noticed that it could potentially glare into the eyes of any drivers coming towards me. So, I decided to switch to the 12&6 setting instead, as it seemed safer for everyone on the road. With the 12&6 setting, I could still see the road clearly, but without causing any inconvenience or danger to other drivers. Even my wife agreed that the 12&6 setting was the better choice for the safety of all road users, especially those coming towards us. But lastly for the down fog lights 9&3 are the best as you are not blocking any upcoming driver because your lights are mostly facing down when driving on streets

Great video, not even manufacturers state this info in their manual and instructions. Got to try this tomorrow. Thanks man.

Much appreciated, you explained every question I had about the installation I did with an undesired outcome. Now I can fix em properly! Thank you!

I've noticed that many of the newer headlight designs have a shade with only side openings, i.e. the LED lights are supposed to illuminate the 3 and 9 o'clock positions.

This has got to be the most informative video I’ve ever seen.

Excellent tutorial kuya! Will make sure to install mine the correct way.

Thank you sir!! The examples at the end were exactly my headlights on a 2003 Avensis.. Huge thanks now i can enjoy the lights

Thank you sa napaka-informative video! Thanks, sir!

Thank you so much for your help. i had a "professional" install new H11 and he could not understand why, one side was dimmer than the other side. but i searched the web and i found you. i did it myself. the only tool i used was an island tool, luckily i had such tool. you saved me time and money, because you explained the positions. Again Thank you so much. i subscribe.

Very Precise Info ! I have an Osram HB3 LED, should I align the LED strip in a way that it is perpendicular to the smallest of the three clips on the LED bulb ?

Thank you so much for this upload! Extremely helpful! Thumbs up from me... Stay safe... Rico

Awesome info! Thank you!

Thanks for this video. I just installed some yesterday, but didn't know about 3 and 9 alignment, so I need to go and check. 👍

Thanks! this explanation was the best 👌🏿

Very nice video friend

Yes, 9 and 3 should always be used on a projector halogen optical. I use H7. On high I have HB3 it's for the reflector on the side

This was not a good video, it was a GREAT video. One of the best, if not THE BEST video covering installation and adjustment of new led lights, comparison, etc. 👍🏻

Thanks for the amazing explanation

I can’t find a proper led bulbs for my 2006 Honda crv, I just wondering there’s a compatible bulb like what you installed in your car and so with the fog light bulb

Thanks for vid. My led bulbs on motorcycle kept blinding on coming drivers and they would not adjust lower. My bulbs were adjusted to 6 and 12 o'clock. Will change in the morning to 3 and 9 then readjust.

Very helpful. Thank you!🙏

Just wanted to thank u for this awesome video went checked my led and weren't aligned now thanks to u they are perfect 👌 thanks for showing step by step on how to do it

The correct alignment for LED is 3 and 9 o'clock position. But thanks for still trying it out. What LED bulbs are these? What brand?

You weren’t lying when you said must watch 😂 👌

So is the led part of the halo LED lights around the turn signal lightbulb?

Very useful video. Thanks for sharing this information with a demo.

This is a good informational video. Now all i need to do is find a moderately priced bulb that is bright enough for me to see but not so blinding it's dangerous to incoming traffic.

Well explained ...Thank you 😇

Hi there. I keep return most led headlight for my Lexus es350 2009 there is none fit it but auto part said H7 must fit and Amazon said so....should I replace wire connectors socket?

thank you for educating me.

Lovedit, many thanks.

Great job on this video.. Super helpful

thanks dude. this video is a huge help for me

Thank you very, I was literally headed outside to install my new Auxito LED lights then your video came across my feed as I was getting up to head outside, I was just going to put them in regardless of how they were seated thanks again 😊

Good work. This help me visualize beam angle and what are actual good results. Godspeed!

Pound and a bear hug. Thank you.

Great information 🙏

Great video, thanks!!!

Is this also a reason why there are dark spots on the road when I drive? I put 9005 LEDs in a projector housing for the headlights, when they are made for halogen.

Which software do you use for making presentation?

How long did it last are they reliable

Thanks this is the best explanation 👌🏼

I’ve installed similar type of leds on a 2016 honda crv fog lights 9 to 3, but I still blind upcoming traffic that way! The fog lights are reflectors, is the 12 to 6 way should change that or what can I do to fix it?

Very good explanation, helps me a lot. Thanks from Brazil.

Thanks for the video! I have a dumb question, what's the technical difference between Fog Light vs High Beam? (aside from the position and functionality) I'm trying to buy a replacement for my high beam and found one but its advertise as fog light and compare it to other high beams I can't seem to see the technical difference between them.

Thank you for this.

heeey thanks a lot for your video!

Do these work on a Subaru wrx

Good job!

Awesome and informative video. Really well done and explained all the way through :)

I really need help, I ordered a pair of oxilam’s (9012) for my 2014 Durango and when locking it into place, the chips are sitting at about the 10 and 4 or 11 and 5 o’clock position…sadly they aren’t adjustable. Are there any work-arounds for this or will I have to return them?

I'm kinda heated that my headlight housings only allow for certain ways to install. Even with the adjustable collar there is only so many options.

Good job bro 🙏

Thank you, best video for LED position adjustment...

Hello Pat, thank you for the detailed video! Why did you use leds instead of HIDs?

I did this and I have huge dark spots in my halogen designed projector. Clocking it different doesn't help

Thank you!!

What led lights are brighter I want it yellow light?

Fantastic video. Thank you

Amazing!🙏🏼

Helli, I installed led bulbs on my motorcycle on position 9-3 and the light pattern has some dead spots is there any solution for this issue

Thanks for this knowledge

Very informative video, its exactly what i wanted to know

Thanks for this very helpful video. Which brand of LED are you using which came with adjustable LED head?

Thank you Sire !!!

Can I have the title of the funky 70s soundtrack? ☺️ thank you!

Thanks for this useful video

How did you adjust the height of the light output in real time after installation? That was the coolest thing I’ve ever seen!

Good video, Make more

I own a 2012 VW cc 2.0t sport and my right side passenger low beam bulb went out and I’m trying to upgrade to hid or led what are the best bulbs out there for my car year

Hi bro can you send me the link for your projector lamp thanks

Bro. Can you do a video on the installation positions of H4 Mini LED lights too? Thanks.

Salamat pre👍. Merry Christmas😊

Thank you for the information. We put L.E.D. bulbs in my sons car. The light doesn't seem to be what it should be. We will have to check the position of the bulbs.

Very important update ! I liked it. !!

Do you have link on where you bought the projectors sir? Thank you!

Hi @goPat Channel do you service LED alignment?

Thanks bro

thank you

Where did you buy The projector lens, sir?

No one seem to include a 3 sided led.

Very nicely explained....

Bro just installed my led light name Fahren led the left one lower than right one would you mind to help me please

How about the philips ultinon essential gen2 led bulb sir?can i adjust the bulb position?

Great !!!

The chips facing up works better for me no blind spots driver or passenger side non projector housing.

What vehicle has headlight aiming control?

Does it matter which side goes to which side as one side of the led is different than other, is there which ones is up and down.

Very good, Sir.

What about hids wire 12 o'clock or 6 o'clock

Awesome can u do the same test with reflector housing

What brand led have you used in this video

Is a double sided led better than a 360 degree led bulbs?

Hello i replaced my halogen bulb with auxbeam gx i got much brighter light but unfortunately i lost the distance as my halogen reach father distance I noticed that my halogen bulbs are shorter (bulb length)than the led and i think this affect light focusing how could i solve this my led is h9