That is a beast! Looks like all you guys that were involved put it all back together right. It looks great all you guys should be proud what a big job it was to get it all like new again. Great video John I appreciate you showing the hole journey of tearing it down and putting it all back together and bringing it up to date and final phase on how it works and how it looks. Be safe as you say keep on rolling!
@wilfridkolarik61102 жыл бұрын
New the material of professional very cool i love the job of the quality professional. Tank you very much for the moment in video.
@chuckwiegand9941 Жыл бұрын
John that chipper looks great rebuilt and painted
@waynetharp4 жыл бұрын
What a project this has been...So cool to finally see her chewing up wood!👍 If the feed wheel teeth hold up well...Would definitely be worth the work to upgrade the other chippers with em!
@c165vin4 жыл бұрын
You guys did a nice job on the rebuild, I would run a straight pipe out of the exhaust, our 23 whole tree chipper runs even better and less heat.
@chrisrobl93414 жыл бұрын
Glad you are still working. That chipper is a beast. Thanks for the video Mr John.
@timthompson58854 жыл бұрын
That's a pretty machine John. Very nice job on putting that together. Stay safe!!
@jacksak4 жыл бұрын
Wow, that's a major piece of work getting that rebuilt... I watched from the beginning... great job!
@markpettit49454 жыл бұрын
Awesome good to see all of your hard work paying off.
@dwsmith14294 жыл бұрын
I worked around a 2355 with a 3412 cranked up to 1250 horse was practically unbearable at full throttle. However when she was run right she could load 23 possum bellys a day.
@johnc81124 жыл бұрын
Finally got it to work good job all mechanics that worked on this machine.
@TheFireman5464 жыл бұрын
So nice to see this chipper running agian I miss running the old girl
@VideosByAl4 жыл бұрын
Congratulations on the rebuild . Great addition to the fleet.
@barryhansen68544 жыл бұрын
Looks like the crew have done an awesome job, as she is eating lots of wood well done John and Crew.
@colinkennedy87304 жыл бұрын
Good to see it running after all the work the team put in
@SupermanJH683 жыл бұрын
Yeah! Finally working. Well done, team
@Seveneleven444 жыл бұрын
Entire forestry industry is shutdown in PA. I work for morbark and we just got sent home last week. Don’t know when We will be allowed back.
@06lbzduramax35004 жыл бұрын
Is there a decent biomass market in pa? Or do you do clean chips like these guys?
@BillSkidmoreoutside4 жыл бұрын
Forestry is considered essential in Vermont
@tommybritton92734 жыл бұрын
Nice John, that's what I've been waiting for 👍👍
@Jordan-ut8wx Жыл бұрын
Boy can you ever hear that turbo sing
@laurencecharlton87604 жыл бұрын
I remember Comrade Dratchev had that as one of his loads!You were in his vlog.Lockdown in UK so thanks for showing,keeps stir crazy at bay!
@timbertom43244 жыл бұрын
I bet Mike was some dam glad to see it chipping.😀
@waynep3434 жыл бұрын
i like it. great job.. time to put the other chipper in the shop for a few renews.. not as serious as the 2355..
@TRichard304 жыл бұрын
It's a live. Nice to see it finally done. Was great content for the pass year. Keep the video's coming .
@marshalldavis44554 жыл бұрын
Machine turned out great.
@emilhuggarn30504 жыл бұрын
Sound of a beast,runs very fine 👍
@leonhill34304 жыл бұрын
Glad ur back and doing well great video 👍
@perryroberts37924 жыл бұрын
John, the trees might it go in the throat of the chipper, but if the clam went in there it wouldn't look pretty anymore!!! 😄 😄
@Duramaximized074 жыл бұрын
Cool video! Nice shirt, cotontop is awesome 👍🏼
@edwardgaskin42454 жыл бұрын
Looking good.
@jeffclark27252 жыл бұрын
Is that the same chipper Sergei drakchev hauled down from Canada,That was a real trip he made if that is the machine
@jbmbanter4 жыл бұрын
Can the muffler be turned in another direction? Beautiful machine! Was there an oil pressure gauge in the instruments, explain them sometime, thanks.
@luvr3814 жыл бұрын
So much for it being clean.
@robmorris37104 жыл бұрын
Looks good 👍 doesn't look like junk
@joeskittino66594 жыл бұрын
Awesome mechanical work at the shop. That thing has two speeds beast mode and super beast mode
@richardhedrick56014 жыл бұрын
New machine looks good
@emilhuggarn30503 жыл бұрын
Runs very smooth 👍👍
@chuckwiegand42784 жыл бұрын
Nice chipper definetly has some power looks nice
@steved.56284 жыл бұрын
Awesome just awesome
@robertbrady95974 жыл бұрын
hi john an wife an kids from Danville pa
@jbmbanter4 жыл бұрын
You'll have to take us inside the cab sometime and let us see and hear the inside!
@randlerichardson58264 жыл бұрын
Hey brother I’m glad to see it finally getting to chip some wood
@jamesmckay99663 жыл бұрын
This might be a stupid comment. Would double layer glass reduce noise in operators cab?
@avontaprice-lg7ws10 ай бұрын
At 5:52 how come you don't have that little black motor running????🤔🤔🤔🤔🤔🤔🤨🤨🤨🤨🤨🤨🤨🤨🤨
@alanmagee12074 жыл бұрын
SWEET MACHINE
@nicholascote84694 жыл бұрын
You guys did an awesome job rebuilding the flail! What is the air compressor used for? Maintenance?
@dwsmith14294 жыл бұрын
changing knives and flail chains, also blowing off the machine.
@fei-forestry61694 жыл бұрын
Nice job 👍
@Krieghandt4 жыл бұрын
Now all you have to do is pay for the rebuild ;) Although if keeps running that smooth, may not take long.
@larrykluckoutdoors82274 жыл бұрын
Nice video, thanks for doing it
@catfishstalkeroutdoorswith5304 жыл бұрын
Awesome
@jameshall16914 жыл бұрын
I wonder when you're going to do complete rebuild of the other chipper that is down or just fix what's broken? Because if my memory is correct you have 2 of these 1 for each crew and a back up now.
@Krieghandt4 жыл бұрын
He mentioned rebuilding an old one that isnt used, and also suggested they may overhaul one of the working ones. Really depends on Mike thinks will help the company. And he da boss.
@shawnecklor79604 жыл бұрын
How long does it to grease the new old machine in the mornings now.
@meyou2454 жыл бұрын
I bet that thing literally shakes itself to pieces.
@codysciarra54583 жыл бұрын
How come it don’t grind the Branches to
@noneofyourbusiness80924 жыл бұрын
By looking at the engine, I would say it's a Detroit,but what engine is it?
@mikemuniak47114 жыл бұрын
How long does it take to fill up a truck with that thing
@dannydeshler43274 жыл бұрын
3:41...Is that driveshaft rubbing on those hoses? Just might be something to look at tie back.
@jocalafarms40514 жыл бұрын
Cost of this rebuild versus buying a new one?
@hardknot4 жыл бұрын
What’s a chip truck like that loaded down worth?
@chuckychuck4 жыл бұрын
👍👍👍👍
@randlerichardson58264 жыл бұрын
I watched the whole rebuild on that beast
@tommybritton92734 жыл бұрын
How does your guy like it compared to the other one?
@eddief33264 жыл бұрын
that many holeses and no leaks , did any thing run backward
@BillSkidmoreoutside4 жыл бұрын
Lots of waste with the flails, we run whole tree, alot less moving peices
@randlerichardson58264 жыл бұрын
I seen it when youns 1st got it
@randlerichardson58264 жыл бұрын
Oh yeah no slowing her down for sure now
@randlerichardson58264 жыл бұрын
I try not to comment so much anymore some people don’t mind it but some people don’t like it when I comment so much. I’m sorry if I make people upset when I comment to much.
@chuckychuck4 жыл бұрын
Speak, this is America, it's your first amendment rights.