Cameron Fitzgerald sounds good

I'd probably replace the coil for better wire or somethin

thanks :D its an old video already but still helps people

Yeah. Never thought of a button before. Thought it would be more advanced...which now realizing when saying it out loud just sounds stupid. Lol

glad it worked out for you :)

most definitely, a french group of ghostbuster cosplayers used this video to do exactly that :)

Calavera good luck with it. Be sure to check my "smoke machine fix" video where I point to some improvements to the system

thanks man, working on one the coming week :)

glad you liked it, going to do a follow up vid to a modification very soon because sometimes the rod of the coil can come loose so made a (easy) fix for that. good to know this tech will serve one of your fab wigs soon :D

Oh cool ! I'm eager to see what's coming next ! Haha, thank you ♡ It totally will, because the wigs are finished and just the smoke will be replaced in all three wigs. ♡ Thank you !

it is pretty easy actually, just the margin for error is low ;) be sure to check out my "smoke machine fix" video to fix leaks in airflow, as just 1 tiny leak can mess up the flow of smoke

great idea man, didnt even think of the rc possibilities :D

CBT-Cosplay parts are on it's way for an XL version 😁 need to do some testing first

Wayne's Workshop that's fine.

Hahah! Mine is for a Katsuki Bakugo cosplay!

Bone Buddrus because the vape battery would have been to weak to power both the coil and airpump at the same time also its more compact/space efficient this way

Did you ever solve this issue?

didnt know the supplier went out, found a probable replacement, a pack of 10 atomizers so without the battery we are discarding anyway for cheaper. i updated the link in the description.

there is a "smoke machine fix" video aswell, you can also check if its the vape or the airpump, take off the airpump from the rest, turn on the device and blow smoke into the vape there where the airpump normally would. no smoke means the wiring is bad and the coil doesnt heat up. if there is smoke, the air from your pump doesnt reach the vape (airflow blocked or escaping) other then that i dont know where it might go wrong for you.

its because this video is super old, and this design is old aswell with a very cheap crappy vape pen ;) i helped kamui with hers as she was very far along with it but couldnt get it to work all the way, so i know her version in her video is better then this one, my for sale versions of smoke machines can blast away for 20 minutes straight. so the short answer? crap shitty cheap vape = crap shitty short burst ;)

Did you fix it? Mines the same.

because you are not following the tutorial? ;) a atomizers battery is rated at 4.5 volts, connecting the double amount of that with your 9volt might have blown it up already... try using a 2x AA battery pack, its 3volts but still better then a 9v blowout, also use distilled water, normal tap water will leave crap on your atomizer.

Wayne's Workshop I used mineral water. I also tried with 2xAA batteries. I seen your second tutorial of putting superglue in between +ve and - ve terminals and tried again.

yeah but you did it first with 9v, so you could have burned out the coil already, if that did happen, the AA seetup wouldnt matter as you already broke it (possibly)

Wayne's Workshop got it right. With 3v. I get smoked by blowing from back or pull out from the front. Thanks. It works. Now I have to improvise it with necessary tools. It seems the ratio of water and glycerine was not right for density of smoke.

Wayne, I used Glycerol BP and mineral water. What is the ratio to use for getting denser smoke. I get very light smoke. Can I use it directly without diluting ?

AndreasGienger coils can actually hold up to a 12volt pack. Also the airpump takes it's fair share so its all good. Tested this numerous times and measured with a multimeter

1. Think I used just that, standard cable which is used for audio in cars n stuff. 2. Working on making it wireless, yes it is possible. 3. Recently purchased a xl vaper, works but not tested with proper fog juice, results soon.

you can sometimes hear the vape "crackle" what you can do to see if you have a air tight seal, is to when you run the system, blow air into the vape hose where the airmotor normally is connected. if there is smoke, then the motor is faulty or not airtight connection... if no smoke, the vape doesnt heat up proper. find out problems by process of elimination ;)

Ben Eagan not really but should last a while

to play it safe it would be 30 secs to a minute max, you could always test this, i know some people even pushed out 2 minutes, however it is at the risk of burning your coil... coils are not expensive and easy to replace so you could even test it if you really wanted to know

watch my smoke machine fix video, and test it apart from another, disconnect pump from vapepen and see if air is coming out and test if coil is hot by turning that on but blowing air in it with your mouth, so you know which one it is that isnt fuctioning

yup, for example your phone charger also works on 220v but converts it and outputs it to 5v, so just find one for 9v and you should be good, be safe though!

Rafael Pereira battery of vapepen forces the pin of the vapecoil to go down, ive found out that this can come out when you push the hose onto the vaper, you can fix it with a drop of superglue on the side of the pin (not centre because airflow)

Rafael Pereira plan on making an fixer update video because ive had this happen more since the release of video

Thanks for the answer

Wayne's Workshop. i have the same problem, but the whole unit won't turn on when connected, the air punp works alone, but the vape pen seems to take too much power. what i mean is i Turn on the device and the air pump works, but if i conect the positive wire to the pen coil (like you show) the pump shuts off, please help asap! also I've done your coil trick and got no results.

Do you have a different vape or power source/battery?

Spencer Cook by "it" you mean the battery or the vapepen itself?

Oops, sorry. The battery starts heating up

Spencer Cook sounds like a shit battery, power shouldnt flow as it stops at the switch so nothing should happen at all. Its that or you are short circuiting it somewhere where your + and - might be touching each other...

ok lets make it happen then for this weekend ;) 1. check out my "smoke machine fix" video if ya hadnt already. 2. run the setup like you normally would but disconnect the tube that leads from the airpump to the vape pen. (disconnect from the airpump side) run the setup but blow air through the tube into the vape pen with your mouth. if you do get smoke, that means you have an airflow leak somewhere. if still nothing happens, it means your coil doesnt heat up and you might have a bad connection. 3. get back at me if it still fails and we see whats what (the 9v can get warm becuase it depletes rapidly, or theres a short circuit somewhere, if ya get smoke eventually we can talk about a different battery type but 9v is the easiest accesable, hence its in this video. bonus tip: use glycerine as your fluid (also known as VG) it provides the thickest clouds

Ok cool going to try that out today when i get home. So if the 9v gets that warm that means the connection is bad.Yeah i heard those E-cigarette explode. I got scared. I'm going to try it with the battery it comes with first to see if it work period . If it does then at least i know it works. then we can go to phase 2 and connect the positive and negative wires to the unit. So i bought fog fluid already from Party City. That should do the trick also the smoke shop sold me scent fluid too., I will try this today and get back to you. I need that smoke to come out of my gun =)

a powerbank can work also and if you wanna push it up, a 12volt pack composed of 8x aa will work real good and wont run out that quick. atleast your plasma cannon will smell nice :P

Yeah i have that for sure. I will make this happen today. Need it for Saturday got a Halloween Contest to enter. $5000 first place. Gots to make this happen. Thanks brother. I will let you know what happens today for sure...

so if you win, you atleast owe me a beer :P

maybe look into the big vape coils, i know there are vapers out there that want more smoke generated because generally they are more addicted to the inhaling part of smoking instead of the nicotine... do not know for sure but i know they can hold on for much longer...

Running them for that long is soooooo not good. Things could go very wrong. You dont want it to be running for an hour

you could, use a dpst switch

you can hook it up to a lithium-ion battery (like the ones in your phone) just be carefull that you buy one with overcharge protector as they can blow up if you overcharge them. if you are looking for a simpler safer route just hook up 2 9v batteries in parallel. more info about difference in series and parallel here: www.zbattery.com/Connecting-Batteries-in-Series-or-Parallel

Wayne's Workshop thanks I'll give the lithium a shot

Nuffy Kei don't see why not. Working on a xl smoker also. Still prototyping

David Robertson YES !!!

Wayne's Workshop thanks for the quick reply. .... 👍 keep up the great work ....... 👍 👍 👍

Gallifreya Cosplay nope. 4 circuits on 1 battery won't work like this, you can however make 4 of these smokers with each their own battery, but instead of the switch in the video you buy a four pole double throw switch. This is a special switch to hook up several circuits to 1 switch lever.

Thanks! Gonna look into those then. And nothing changes in the way I add them all together (apart from that I need to add all 4 of the smokers to the toggle switch)? Do you know where I can find there switches? I only seem to be able to find toggle switches. Or do they only have those? Sorry for asking, totall noob when it comes to electronics >

Sam Hobson any will do that fits snug. I believe this is 5 or 6 inner diameter

OHmyJESUSROFL check out my smoke machine fix video

Wayne's Workshop I just watched your fix video but my problems seems to be that the solder won’t stick. Whenever I add solder it slips off. At first it stuck on but now it just slips off i don’t know why. Also I’m not sure if what your telling me to do is super glue it first to hold the position then add the solder. If that is what I’m supposed to do to fix this then reassurance from you would be much appreciated

OHmyJESUSROFL non sticking solder is either the surface is not hot enough or scuff up the surface a bit with sandpaper or needlefile so it has something to grab onto

Super glue is only to hold the pin in, not to stick solder or anything

Wayne's Workshop okay thank you for your help will try it out.

have you looked at my smoke machine fix video? it usually is a case of a leak in the airflow... detach the airpump, trigger the system but blow air yourself in the tube with your mouth, if you get smoke there is a leak somewhere in the airpump-to-vape part if no smoke, you might have soldered it wrong and the vape doesnt heat up, hope it helps