Cars from 60s and 70s had different keys for ignition/doors than trunk/glove box. The ignition was a square head for Ford and GM. The trunk/glove box had a round key. That was for having the car serviced only needed the ignition key.

Cool Mustang build. Hang tough. You can do it!

The Porsche came out hot, love it.

That was an amazing deal considering all the good parts on it

Talk about a parts car. That's amazing getting all those parts.

Woodgrain nardi steering all the way That car sounded like jumanji beats😂😂 Nice score. Donor cars are the best investments. Project ends up costing half as the sale of the Xtra parts supplement the build

If you can't fix that car you ain't no bodyman.

great stuff thanks, that is a nice score.

My name is Abner I'm a tinker here in Brazil . I do restoration in old cars and I would like to meet you guys in your workshop a hug .

The body on that Porsche is pure Marc. 🙏👍

Great 👍 content guys 🙂. Thanks for sharing. Can't wait to see the Mustang 🐎 build finished. Thanks 👍 for sharing.

Hurts to see, but parts are cheap and so simple to work on, take the back seat out to get in the trunk Headlights are amazon specials theyre the same size as any jeep get something a little more fitting in there

Looking forward to the Mustang vids.

What a great episode for bot cars. I’m excited to see the work done on the Mustang and in love with the evolving GT3 Porsche. Thank you so much., Guys.

Matt's a pretty good cameraman.Awesome shots.The 'Stang will look Awesome with the new stuff.The gauge said about 7K miles,so that engine is fresher.Beefy cam too.Porche does look New ahgain.Great work!

That was a steal of a lifetime! Can't wait to see this build done!

This is a parts car dream. I mean it has everything you need to make a clean solid body Mustang completely Sick! You are correct! That body is Toast! The thing is, It has all the goodies you need to make a super clean shell into a Fantastic Mustang Restomod!

the old porker is coming on nicely - do love that colour - Mexico Blue hmmmm and the mustang looks like a cracking project - wow i'd forgot about the straight one, i remember it being painted when you had pretty much just started working there, will be a great project so true, nice to take stuff off and put in the new car

Can’t wait to see the mustang build still hoping your bro finishes his lol

There is a round head key for the truck on old Fords. You got an awesome deal on the car. The engine probably has a crushed pipe at the exhaust manifold and it may be forcing backpressure into the block. I will be watching to see you build this great car!

The car won't keep running, could the fuel line run along the wrecked side? Pinched really bad maybe.

that mustang build in a week is a great goal but im gonna tell you from experience that it dont work like that your gonna have missing stuff, broken stuff , shit that dont work i dont want to hurt your feelings but this is what happens good luck bro your killin it a few more years and you will be workin for your self

Come on now Mark, just slap some bondo on the Mustang and she's good to go! 😂😂😂

Grant Steering Wheels makes quality classic wheels. I have put them on cars and trucks I have since the 80's

Awesome video❤️

Understand not everyone has unlimited budget, that’s a not a bad buy at all, Front suspension is stock not coilovers, 8 inch rear end too Barry Grant steering wheel Good luck, oh I’d throw those headlights in the bin 😀😀😀

Do a leak down test on the engines.

Definitely wood grain wheel

That old bent shell could be straightened and fitted with a fastback conversion.

Crazy how those Mustangs are similar in color. Great choice to part it ok. I’d use the engine from the wreck mustang. But go fuel injections. Also I bet that transmission got busted from the wreck. Great work Marc as usually. ❤❤

About time the mustang returns I'm super happy 😊😁

Love the 67. I have one sitting in my shed with 18.000 original miles on it. Been sitting since 1970 but well taken care of over the years.

Awsome parts car, will be following this build. Go with a woodgrain oem steering wheel

Keep up the good work and videos bro

get a microphone that is pins on you.

Great job. Stay safe and be well. God bless

That's a great parts car.

I put a efi kit on my sons ‘67 mustang 289….man what a diffrence…currently in the process of building an aluminum headed later model 5.0 roller motor

That tie rod fix is epic 😂😂

Just subscribed to your channel. Great content

Great video 😎😎😎👍👍👍

Probably had one key for ignition and another for doors and trunk.

We used to go through junk yards back in the day, with a good sized flat head screwdriver and a hammer to open the trunks on every car there.

The ignition switch on that car is obviously from a 1965 or 66 mustang. Starting in 1967. They had one of those two-way keys which you could put in either way. The trunk lock is still a 67 lock that uses a two-way key. I hope this helps.

That Mustang is definitely great for parts. Love the Porsche ~ Awesome job with it! Keep Orange Crushing It!

I’d like to know why KZfaq unsubscribed me from the channel! Another Great Video 👍 Great content, keep up the great work!

Vintage Burgundy. Had it been a Fastback I would have cried

bet vtuned has all the parts you guys need, he has taken apart like 3 of them.

Damn that's what your brother needs right there vtuned definitely could use this

you will have a drivers side and passenger rear quarter. maybe even a roof if you found something needing a roof.

Happy to see you finally get a muscle car to rebuild on the channel 😊

Tell Vtuned to finish his mustang build!!

I wish you would continue the m3 replica build

Check fuel flow. Damaged fuel lines?

Wonder if distributor cap got busted and now has moisture inside it causing it to run that way

Everything has to be ‘super’? 😂

1967 was the only year they had a high center in the Stern wheel would be nice to put that back on there

Thats one of John Wicks cars.😂

Nice color bro

Was going to say those parts would look great on my 67. 😁 All that money,and they didn't swap in a 9inch?🤔

i am looking forward for the mustang build

The wheels are tires on the build Mustang is going to look badass

tnx for the video

Ok after seeing more of this I think you should put it on the other car and let this go. Good luck

Try the remote on the trans tunnel

if you "only fix" the wrecked pieces side" and the grill along with the paint how much would it cost to buy the car?"

I seen this for sale. Almost bought it myself. But I have to many projects already.

Look son!! I got you a fully restored high performance Mustang for your 11th grade graduation present to go with your brand new driver license. No more riding that BMX bicycle. Whoops, don’t get your new pant leg stuck in that chain.

Why not buy a new fastback shell from Dynacorn n fill it up with the parts?! 💯🗽🇺🇸

Mustang swap makes perfect sense..❤❤❤

Check out thunderhead 289..he has a electronic Carb tunning kit. Probably smashed body worth money for panels to somebody..

Back in the day we repaired cars hit that way!

Possibly the fuel line got kinked off underneath some where. ???

it has a 2nd key for the trunk

All can be fixed, its only about time and money you want to spend on it.

Gday mate a bit late to the party but every coment counts yeh

The black mustang is not good. It's not mine.😅😅

You dont know the square/round Ford keys?

Timing off?

They don't want to fix they want the parts, I don't remember the caramo that was restored was hit harder then that car, the caramo is looking good now.

What's wrong with the carburetor why run fuel Injection truthfully the fuel injection system can cause more issues but depends upon preference

Tiny little discs up front and drums on the rear...a Mustang accident was looking for a place to happen .

A kid at work told me, his Dad gave him a completely restored and updated 67' Mustang for his 17th Birthday . He said he totalled it, just 2 weeks later . This..could be the same car ...😳

They ain’t nobody else that could get the 400 down that stretch any faster and on that same note she will weighs a lot less than any body else that would be trying it so she has a natural advantage over others

Different key for the trunk

Ignition key and trunk key are different. Trunk is round

So, painting a car with a roller is not good?

I vote against the headlights. But just my opinion.

I've seen worse off cars rebuilt. That Mustang deserves reviving, not being stripped.

If the radiator isn't hurt or the driveline I would take the car to car shows maybe lol..My brother had a big ol 64 4door Oldsmobile that the passengers side was banged up bad and he drove it everywhere ...It'd smoke the tires at 30mph and it was a big ol family car with a 431 or 421 big block engine and it ran really good. He took it to a drag track but I don't remember what the ET was..He found a big ol Buick body that was in nice shape but the engine was bad and he put everything out of the Oldsmobile in the Buick and it didn't run anything like that banged up car did..I'm pretty sure if he'd changed the rearend it'd ran the same as the Oldsmobile did. The doors worked and I don't know how cause it shouldn't been allowed on the roads but in the early 70s the police didn't bother people cause they knew everyone drove what they could afford..I'm hoping yall can get the Mustang going again cause it looks brand new inside and once upon a time the whole car looks like it was a show car..Good luck with it...

You're going to have to regap the whole front end on the black mustang, because you should have started with the doors first, not last. You'll figure it out

Dude that mustang is fixable u can do it with a new floor a door and fender with some tweaking on frame machine it a shame to destroy it like that

If you are Lucky the other motor with the tall valve covers is newer Roller 302. PLEASE Don't use those Headlights!!!

You gonna have a classic mustang before vtuned!!

👍

It is a unibody, I guess they could push it out and plumb it out! Good luck!

U gays need to do a visit to goonzquad with the gt3

You.can.do It.

Rear disc brakes are a joke. Chrome oil pans leak because the Chrome doesn't seal against the gaskets.

360p?