PSIYCHO!

@@jdailey01230 That's a PSiYChO idea

PSIYCO

who is buedrow

See choe

Its up there with being a nuclear physicist during project trinity and saying "The atmosphere is on fire"

I'm not a machinist, but I'm a steelworker, and it's equally scary for us.

Yeah I’d say the EE on this project is not actually an EE… or shouldn’t be. There were multiple apparent drive faults, a runaway motor, something lost its smoke, and an incorrect e-stop circuit. On top of that the drive evidently could be restarted to the point is looked good to go. (Surely there’s something they’re not telling us?) The drive isn’t sized right for the application and/or is incorrectly tuned and the safety circuit… isn’t safe. And whoever is in charge of the set, if even one person on site doesn’t know about the generator e-stop, no one should be bragging about running a safe site… Terrifying failures of giant death machines with people running around not knowing what to do isn’t entertainment.

@@jazzman782000 I mean I was entertained

@@jazzman782000 whats the worst that could happen? they are in a steel crate, and the plexiglass guards them too. they are a fair distance away and even if it catches fire, they would stop it and run away. i know embers can go very far, but it isnt likely the forest will catch fire that far away.

🤨🤨🤨 I think it’s best for em to not show how to make a human blender 🤨🤨🤨🤨

Love this idea

@@whyismynamehereI mean, it’s not exactly rocket surgery - put big sharp thing on big spinny thing..

@@Ben-rq5re I know but probably best not to show how it was made or what parts where used

I always loved how over engineered everything they make seems (until they inevitably break it). Quite a bit of thought goes into making these projects as awesome and as safe as they can make them.

من اجيف الاشياء علئ الااطلاق

One last 🤙

Are you the English teacher?

@@howridiculous do you guys think you'll bring back some old stuff like the super trampoline, that was some good stuff. You could drop some old props or some new stuff? And just an idea for a future video, make a Rexy prop, like a massive rexy?

@@howridiculous Put a balistics dummy in it

It's a shred or be shredded world. RIP

When the E-stop didn't turn it off but started going even faster, I got flashbak to the HBO Chernobl series when they pressed AZ-5 and the reactor exploded! Scary...

Hopefully they fix it and are more careful about e-stops in the future

The problem is the cavalier attitude telling their fans (some of which are qualified engineers) not to worry because we unplugged it and have multiple safe guards in place right before they have a near miss. The engineering team(assuming there is one)behind this needs to release a video on what they’re doing to fix this to rectify almost killing someone. And they need to do it by the book with s as proper risk assessment and safeguards. Not following LOTO is as basic as it gets.

that's the first line of code you implament, if you followed a "siemens" step 7 plc course. Safety.

@@spacekb17 "Almost killing someone" is a hilarious over exaggeration.

i said it to myself and then thought why would anyone else have that thought lmao

Well it's mostly just plastics and light weight metal. Apart from the pumps.

It stopped ththough

This! Was looking for someone to say this. Your name checks out

Probably gotta insulate it or something though, otherwise that camera might be fried too

That was also a cheap, chincy e-stop regardless of amperage.

​​@@aze0012Nope, just get a proper e stop rated for the appropriate amperage and use a fuse or breaker, not that cheap crap they were using.

​@rlsbluedevil2016 It's not like it's an incredibly technical observation. A better one is that the estop they used was a cheap piece of junk. They needed a proper estop that was rated for the proper amperage and a breaker or fuse in series with the power supply before the load. Their saftey protocols for filming are slightly lacking.

But if they weren't ok...oh well. It'd be their own fault.

rip

Yep, I'd be hitting the merch shop big time for one of those.

same vibe as willy wonka when they go dark mode in the cave. they need a hardware estop IN the bunker

Deadass when they said that i just was thinking of the resonance cascade from Half Life and it spooked me a bit

@@BiggieMFCheese Now that you say that, rather seemed like a similar scenario. Thankfully, their blender won't rip holes between dimensional space... hopefully. But something like that going wrong and _not_ shutting down is scary. Considering at least one person didn't know about the e-stop, think some better training and communication might be good in future - especially with building monstrosities like these. _Especially_ if something goes wrong.

Very Mythbusters of you

or a real human

A side of beef might be interesting. Have a bbq for the whole crew afterward.

I would love to see a real human inside..

@@JustJayYay I'm happy to name some "volunteers"

Glad you enjoyed it! Part 2 is even crazier haha

@@howridiculous part 2?!

@@howridiculous speaking of part 2, when does that drop?? I'm on the edge of my seat here!!

When the estop doesn't work then unplug it.....duh

I mean, this is essentially the same thing as the bats and swords, just with a wall around it.

Yo I’m first to comment

Now that's a throwback.

I'm watching that next!

"Blender smoke, dont breathe this"

hope blendtec dont sue

first thing i had in mind

And for some reason I see them using abnormally big fruit- like from cloudy with a chance of meatballs 😂

I just commented that on their own comment then realized you said it first xD. If they had like 1000 watermelons

How would they clean it up tho 😂😂😂

They should do that and then donate the smoothies to homeless people or food shelters

I hope he does not blend (pun intended) into the group too much, they have to have an at least moderately sane person near :)

Lol I was going to say something similar. 😂

They need a fourth.. i mean, FortyFour Club.. right? Only makes sense

@@justinleal811 They started out as four, so them going full circle and becomming a team of four again is kinda fitting.

I like it

They are actually very dangerous in the way they don't focus on safety first. That machine had some serious torque and they didn't have proper shielding. When it comes to safety, you do not react while something bad is happening. Instead, you make sure that no matter what happens, you or anyone around you is never in danger during the operation of equipment.

@@guillaumebourgeois42 What do you mean they didn't have proper shielding? They were in a storage container, (what looks like) a good 30-50(?) meters away from the blender. You can see at 15:11. Plus, they had multiple safety procedures in place, one of them they ended up using to stop the blender after their first e-stop failed.

@@GolenCheeseIt Mild steel, contrary to a popular belief, is not meant to stop flying objects or projectiles. If you want to be truly safe around an object that spins thousands of rotations per minute with such a big tool attached (the blender blades), you either need ballistic glass or some kind of concrete enclosure (bunker at best). When they realized that their emergency stop failed and they had to have a guy run to turn off the generator, this isn't proper procedure, it's called handling a potentially catastrophic situation in the only we can right now because we were not prepared enough. The blades were still spinning when this guy decided to leave the container to make a run for it. You just need one well timed defect to end a life, amputate or seriously injure. This is not about being a downer, it is about keeping people safe so they can continue to produce fun videos without having an off-camera hospital visit, and screw the injured persons' family and friends mood for months.

@@guillaumebourgeois42 My mistake. I see what you mean.

@@GolenCheeseIt No mistakes here, I had to learn it from somewhere too ;)

yea I'd really love a 2nd channel showing some of these builds

Quick flick they can’t bite ya then lol. Wouldn’t flick a funnel web though .

He would do that with a tarantula the same way

@@kaiserwilhelm121 yeah they move slowly hahahaha

I'm just glad they didn't thump it into the blender.

@@JasonEllBowling hahahahaha

It was Psiycho

@@Mirrorgirl492 Psyco*

@@siLveRscOpe13xPshyco

IT'S NOT SHUTTING DOWN IT'S-

I loved the "liquid" appearance of the fridge until the blades failed.

I knew the golf balls were gonna be a fun one.

69th like:)

Don’t copy the top comment you sad human

@@chinanumberone7723 It's not a copy. It's not word for word, and it's not the same part of the industry mentioned in the top comment. There's a high chance the top comment didn't show for them when they commented, even if it was hours after. Your comment has to go through servers, etc, with limited refresh rates (probably not the right term but it's close enough to get the point across), so you could leave a comment and it could take up to several hours to be updated for every other viewer of the video around the world. The way it works and where they might be in the world relative to the author of the top comment, they could have actually commented first, and it was just the timing of the servers updating/refreshing that resulted in their comment showing as being posted later. The E-stop is the last line of protection for a wide variety of equipment, people's lives depend on it every single day, and for it to be seen not working is going to be the most terrifying thing most/all of the operators of all that equipment could ever hear, because as much as they're trained for operating the equipment safely, the dos and don'ts to stay safe, the backups, escape routes, etc, there's no backup plan to the E-stop, so it's completely understandable that many people working in all the relevant industries and hobbies will share the same thoughts and subsequent comments on this video. Edit; I posted this reply at 13:43 on Tues 26/09/23 (dd/mm/yy) BST/DST/GMT+1 Edit done by 13:48 ^^^^^^^^^^^^^^^^

@@chinanumberone7723Bad bot.

The tennies!! That was so satisfying

Yea

Blender vs blender was pretty funny 😂

When everything went wrong

it’s gotta be the tennis balls

Lil' Timmy gonna learn t'day!

Honestly so were we 😵

𝐈 𝐝𝐚𝐲 𝐚𝐠𝐨?

not enough of either on safety though. The amount of money they spent on that damn blender and not a well seasoned electrician? If I wired it sure, the e-stop might not work. But come on? They need a safety engineer on staff to vet workmanship.