Glad you are happy with all the tools. I know you'll put them to use! Nice meeting you and your family. And to everyone wondering why I gave away tools, I have another set, these were given to me a long time ago and have just set. Thanks Doug

6:48 That is a panelbeater’s dolly, for fixing dents in car panels.

I ended up with two toolboxes of free tools myself that were my grandfathers about to be thrown out. I was the only person to take the time to dig through them and clean the grease and rust off and sort through them to even see what they were. Turns out it paid off. I found some antiques and some very rare finds. A couple worth mentioning were a batwing style c clamp,vintage Mac breaker bar,a indexable adjustable wrench that’s patent dated 1916,a very rare Snap On ratcheting adapter for a breaker bar which is patent approved in 1923 and my style is the second version of the 4 they released. If it stamped patent pending it’s a pre 1923 and I’ll have to clean it up some more but it appears it may be. I also found a few antique snap on extensions and some old SK,Williams,bluepoint,snap on and some Chicago made stuff. Cool thing is it’s all vintage American made stuff.

Great find Ashley, congratulations, you can keep duplicates and still pay it forward to family and friends and even strangers like the nice man you got them from

What a blessing! Keep them dry and organized and you'll love them. A rare find and yes, he blessed you. Happy for you!

It's a dolly used with shrinking and planishing hammer for metal work. Especially body work.

The pruner is supposed to have a heavy spring that goes over the projections. Makes them easier to use. Great haul.

if you were to buy all that new u got over a $1000 well done. Bit of oil and elbow grease 90% will be new again.

Not sure what you keep. But just for further reference. Craftsman hand tools are guaranteed for life. So any that are damaged can be returned to any place that sells them and they will replace them for free no questions asked.

Wow that's a great haul. That thing you said was for shaping, you're exactly right. It a shaping dolly. For sheet metal work. Good luck to you.

On minute 6:51 that is called a toe dolly. It is used for bodywork-- dent repair and yes shaping metal

Ashley, thanks for the tip to shop online for free stuff. Never knew that. Awesome haul.

It’s a dolly for body work on cars you hold it under the dented metal and hit the dents out with a hammer

Great haul! And very nice to hear you plan to spread this wealth of tools. Sometimes good things happen to good people.

Now that you have the tractor in Mich.hopefully you kept the largest tools..might come in handy..God was looking ahead for you⭐

Coool! Even if you kept half, it's a great haul! You did good kids.

Great find! Love tools myself. Got a lot trash picking - one of my favorite things to do!

Wow, you got a great haul. Anybody who works with tools dreams of a deal like this.

@6:40 that's a dolly used for sheet metal and body work in conjunction with a body hammer

P^:32 is an anvil for removing dents in auto bodies. Phenomenal price!

Love that baby Bella, good haul guys.

What a fun haul! I am enjoying watching past videos. Keep Being You. 🌻🌵🎶

Good for you guys. What a great thing for someone to give away. What a haul of tools.

That was an amazing lucky tool haul. Your wife did a good job spotting that free stuff. Now you have to lug it around on every move...lol

6:44 IT'S A DOLLY FOR fender and body repair

Wow, you got at least $2000 worth of tools. Very nice!

That heavy piece of metals for body work put that piece of metal on one side and a hammer on the next and there it is nice find

such a lucky dude great haul 👍

👍👍 Wow...you hit the jackpot! That shaping tool is for doing body work I believe.

Think that's the biggest collection of wrenches I've ever seen.

Great find!... a year ago now 😅 But not sure if you’ve realized it or if you still have it but the tool at 8:00 is used for fishing when removing the hook from the fish.

Body dolly, helps straighten out metal, like fenders

I see a tool shadow board in your future as a project.

Great tool haul !!

That's a great haul!

WOW, good find Ashley

Somebody may already have answered. Thar odd/shaped piece of steel at 6:33 is a hand-held anvil (don't know its name, sorry) used for auto body work.

Looks like you guys are nice couple that’s why you got blessings!

the thing you did not know what it was is a toe dolly for body work to remove dents from sheet mettel.

Wow y’all did great thank y’all for sharing this

awesome haul. i'm jealous.

7:59 .. my dad used those to pull fish hooks out of fish.

I know it’s old, but wowsa ... huge score on these tools .. Ashley’s right, hundreds if not thousand dollars worth of tools there. Restores your faith in mankind when someone can give away stuff he wasn’t using to help someone else out, even if you only ended up keeping a fraction of what he gave, it must have been a very nice addition to your tools It’s amazing your eye and ability to recognize stuff ... that thing you didn’t know what it was, but said “some kind of shaper or anvil”, you were right - it is an auto body shaper.

Totally awesome ✌💗🌻

Wow what a haul! The little pruning shears only need a small coil spring in-between the handles to open on their own. Some of those large wrenches and sockets can be very expensive. I was an industrial mechanic and some of my speciality wrenches were over $35 for one. You should have plenty of wrenches now! lol Phil

Be careful...check that bucket of loose nuts and bolts before you throw it out...the spring for the pruning shears might be there.you cannot use it without that spring

wow nice haul

Looks like Christmas! 😀

Wow ! What a deal you lucked out big time:)

What a great find. Here where we live people put there junk on Craigslist for new prices. It's ridiculous. There are some people out there that are so awesome. Thanks to the tool haul dude if your watching. You blessed some great people. See ya ~ Danielle :)

so awesome!!! I am going on my craigslist now to look around. We usually only go when looking for something but it be great to look for things to flip. By the way, Doug says that's a Bucking Bar. It's used to set rivets. You place the bar on the tail side of the rivet to shape it as the head of the rivet is being hammered.

Big wrenches are for working on big rigs and tractors

To Craig’s list I go... so jealous!

the matal block you where wondering about is a anvil to hold against the back of a dent in a car when you plane it with a hammer

That flat curved bar you asked about is for car panel working.

i would say about $1.000 worth of tool

Hey Doug did you know that if you take any Craftsman tool to Sears or where ever you can find a Craftsman seller, you simply walk in with no receipt and they will exchange the old for new. I did it once just to see and I walked out with out paying anything. The beauty is, is that it comes with its original packaging which you can re sell.

S C O R E! The rounded metal chunk might be a backing block for pounding out dents in sheet metal (fenders, etc). It looks like you might have at least a couple thousand $ worth of tools. I especially like the pipe wrenches that can be used for plumbing around corners! Actually, they were probably bent from putting a piece of pipe on the handle to get more leverage.

It’s a coma dolly. I have a snap-on one I use for body work

you should check the brands because if there craftsman you can return them and get new one

Build for yourself 2 good sets of everything it will come handy.

Those are car mechanic tools! What an AWESOME haul! God sure is blessing your family!

It looks like you got a whole set of offset wrenches. Lucky guy!

HOLY CRAP! what a haul

6:36 it's for repair the structure of a car body work such as door for example Yep 👍🏼 Great video and nice people

Great tools !

Well done and what a nice guy..Your pruners just need a flat spring ..The steel piece that you didn't know what it was used by ,a panel beater..Some handy filter wrenches..Well done guys..

That guy was very generous

The tool by the gas cap on the trunk is a breaker bar for 1/2" sockets.

You should try blacksmithing and make some useful knives or other items out of the broke tools. the big bolts would make a nice axe head or a hammer.

Cool find brother 👊. Had to sub.👍

u got probably at least 1,000 dollars of tools. Just vice grip that bent tool

What good fortune!

bent screwdrivers are used to adjust brakes on old cars

Amazing :)

6.50 min mark, thats a dolly for panel beating dents from automobile panels, wow! ya got some goodies, that will find a use for later on when you gain more knowledge, ya never stop learning

awesome!!!!!! you got lucky

have to love free tools. well actually have to love all tools lol!!! cool video

Epic tool haul!

It's a body block for shipping metal.

old video but that large wrench can go for 35-40 bucks ! God bless!

Free tools are fun to go through

New sub ! Liked 😊👍🤩

Wuuuut?, Great score! (6:43) For doing body work, dents in cars. Place it behind the piece you are going to fix and tap with a hammer on the other side.

Good job mate

envy is eating me up. Congrats.

put a spring in the handle of the pruners and sharpen them and you will have a nice pair of pruners

bent screw drivers come in handy

Build a peg board...so you can make a place for each wrench etc.

Wow! ❤

Nice !!!!

@8:00 that's a hook puller for fishing

Nice

Wow ilike that socket and wrences

well done folks x

Does he have anymore of them boxes of tools I can use some of them where is he at?

6.40 it's a dolly for removing dents in sheet metal

Good for you both

The heavy metal thing is for working metal on cars.

I know its 4y old but the part u didnt know about is called a dolly for body work on cars