We have LIGHT control!! Switch Pro 9100 on 2021 4Runner! (This took longer than expected...)

No video

We have LIGHT control!! Switch Pro 9100 on 2021 4Runner! (This took longer than expected...)

Рет қаралды 11,390

Күн бұрын

In this video, we get lighting control for my 2021 4Runner with the switch pro 9100 system. We went with a mount from sdoffroadmt for the switch pro to mount onto in the engine bay.
Instagram for the mount: sdoffroadmt
Please like and subscribe it would mean a lot!!

Пікірлер: 36

@zalllon Жыл бұрын

This was the best video I could reference for my 2022 4Runner. I’m not sure how others do it, but I found it tough when installing the full tray set up on the truck. Getting the wiring through the firewall grommet was a b*tch, and ended up pulling half the grommet into the cabin. Took me 40 mins to get the grommet to seat and seal perfectly again. Still have switch wiring to complete and then cables to battery, but those all seem too long. I totally agree with your frustration on this install!

@Connortaustin Жыл бұрын

Grommet was one of most frustrating things

@offroad9205 2 жыл бұрын

Connor, From your experience installing the switch box relay, it’s easy to understand why the majority of automotive problems are electrical in nature. Most owners are to scared to even think about doing this type of work. Kudos to you for a successful installation. I am still deciding on what accessories I will buy for my 2022 4Runner Off-road.

@Connortaustin 2 жыл бұрын

There is something about installing things yourself that you learn and appreciate even more! Hopefully your 4runner turns out amazing!

@Jaydayallday 2 жыл бұрын

Seems like you did fine. Set up looks clean and professionally installed. Don’t beat yourself up on it and these electrical jobs and running wire take a while and some good hours that’s why they charge so much for install so don’t consider your job/yourself as taking to long. When your doing it right it takes time.

@Rocket2Reading 2 жыл бұрын

Great video. One thing, the manual emphasizes to connect switch pro ground directly To negative battery terminal and not frame.

@toddgraham7033 2 жыл бұрын

Love the garage set-up! You need to do a garage walk-thru video. This is Obsessed Garage level!

@Connortaustin 2 жыл бұрын

I will make a video of the garage setup!

@tyleraustin6921 2 жыл бұрын

turned out clean!!

@Connortaustin 2 жыл бұрын

Thanks!!

@fredA1234 2 жыл бұрын

I am going to be hooking up one of the switch pros on my new truck and I’m looking for ideas so that is why the question. Thanks for the video

@Connortaustin 2 жыл бұрын

I am not an expert so I hope I answered that the best to my ability I am new to all this!😂

@dixbuiltit1293 Жыл бұрын

Mine came with a. Fuse link (a lot smaller) in line with the power wire. Saves you slot of wiring space

@brpnw4r94 2 жыл бұрын

I'm burning through just about every SP-9100 installation video there is on YT and hitting the forums as well BEFORE I crank/cut/strip/drill/remove anything OEM and the switch itself. I'd really like to mount the switch pad elsewhere BUT the area most popular is on the L side where you did. This may be the most advantageous spot as it's the closest to the engine bay although I'd entertain mounting it on a RAGO, or simular, mount center dash clock area using RAM mounts to keep it on my right and at somewhat eye level. Decisions, decisions

@Connortaustin 2 жыл бұрын

I bought the mount from SDHQ So I did not have to cut into any oem panels. The mount replaces the oem panel with a pre-cut slot for the panel to fit in perfectly

@brpnw4r94 2 жыл бұрын

@@Connortaustin...yeah, I've had the MT on my hands for a bit and that's a not a problem nor concern. When I say "OEM", I mean where the touch pad will mount. Only want to drill/cut once.

@kd4kzz Жыл бұрын

Way easier to remove OEM relay from bracket then remove bracket. Where did you put the relay box. There is a tapped hole by firewall for it to sit out of the way and be accessible.

@nylonnalini 2 ай бұрын

The Harness wires are being drawn to the Terminal Block? How is the Fuse Box connected to this setup! Not quite clear here. Individual connections have to be fused right?

@unounv 5 ай бұрын

So is the fuse box and bus bars and circuit breaker included in the switch pro kit or you have to source all that separately?

@user-gu9rs1br1w Жыл бұрын

Good job man

@yakbutterblacktea 3 ай бұрын

How long did it take you to complete this install.

@petermonterroza3109 2 жыл бұрын

This was forsure a head breaker

@Connortaustin 2 жыл бұрын

the goat camerman

@jamesweatherman850 Жыл бұрын

What did you end up doing with the pink wire?

@jeep5871 2 жыл бұрын

Great work! Is it possible for dash cam parking mode? Thanks 🙏

@Connortaustin 2 жыл бұрын

I am not sure!! You’d have to do some research on that

@leakweed 2 жыл бұрын

wazzup bro quick question where did you tap the white wire? TIA

@Connortaustin 2 жыл бұрын

So I haven’t tapped the white wire in yet, but when I do I’m going to tap it in to the tail slot, so when ever I turn my lights on at night time, the switch dims also For me the tail I believe is top left on the fuse box if I remember correctly off top of my head

@fredA1234 2 жыл бұрын

Just curious not questioning your method at all. But Switch Pro says that you do not need to use terminal blocks or relays you should connect directly to their wires for warrantee purposes. So why are you using all that extra stuff when switch pro recommends not to. Again just curious I am not questioning your method?

@Connortaustin 2 жыл бұрын

If you just use the switch pro mounted to the side-wall it is going to be a mess with wires and everything… Adding the mount from sdoffroad mount, allows for a terminal block / bus bar / fuse box / relay switch where you can put positive/negative on the mount for all 8 accessories for the switch. So with the mount I have, only 2 wires are going through the firewall, and everything is clean and mounted to the tray instead of multiple spots within the engine bay Plus if you wanted to add other overland accessories then you’d want a tray with these options

@fredA1234 2 жыл бұрын

Gotcha understood. I didn’t think of the neatness aspect of it. Thanks