should of weighed it on the scales to see how much the bondo added to the one side

Ah yess WD and his "Upgrades".

Nooooooooooooooo

Oh boy 😂

For the science- take 2 alike cars. Source the cheapest performance parts on temu and install on one car. On the other, do the same mods but with name brand parts. See which one gains more power and how much the power difference is at the end!

The look Sams face says it all 🤣

@@jimmyjones8311 It was so bad I think poor Sam was having NAM flashbacks. 😂

@@FarmerFpvWow that’s good one lmao

😂

Petition to change Sam's name to Patient Sam.

When was that?

​21:09 ​@@aaronstubbs6855

@@aaronstubbs685521:10

21.05

Im dying 😂😂

Cleet hitting him with the tazer had me in tears!

fr those cookies made me hungry. W Sam

1000% Sam is the man! I have a couple Of his shirts for that reason….. really good guy with a super amazing past, AND served our country 🇺🇸

I would literally die for sam and his cookies 😂

I don’t say this about people I don’t know but man. I love Sam

That's the genuine wholesome Crew that makes them so popular

Right? That made no sense it should of just fell apart and remember they only tack welded like ten spots. It honestly is impressive.

You couldn't even tell, talk about added strength. I mean it's better than new at this point.

well sure only 1/10 of the bondo is actually maybe a little bit hard lol

It's backed up with a bucket foundation though...

The bucket is in the front of the quarter infront of the wheel well. That's the only bucket that was added

I saw that too hahah

😂😂😂😂😂

The windows are down so they don't get paint on them!

I hope the guys doing work on the drag cars are getting recorded and we will see that later

@@TCHrulez I visited the shop setting up for Armageddon on Thursday. The cameras are always rolling on Ty and James working on the cars. Zach is always wiring something. Thank god for Zach because the wires harnesses would still be held on with scotch tape and they would have flashlights as headlights. You can't get near the boys cause it is taped off for filming. I guess they have it taped off because people have probably messed up the filing before. What sucked is that George, Sam, and Garret were not around. That was a bummer. I at least wanted to see Sam. Hopefully tomorrow during the Jump competition.

@@FarmerFpvZach is underrated and MVP

Well said bro

Same I was crying laughing 😅

Hang in there friend, looks like you’re getting it together sooner than later. Good luck with everything!

Enjoy some Oxy’s and watch the video🤤👍🏼

43:04. Looks like "Ricky" from Trailer Park Boys.

The best, then JH running from the tazer lol

Just in dyer need of bucking that seat belt 😂😂😂 he did it to squirrel just before that too 😂😂😂

😂 that woulda been the funniest thing that's ever happened on this channel

11:56 Cleet said "Using brake clean just like we taught him"

@@B_M_Ayeah, but if he sat it on fire it would’ve been stuff of legends

Then he says you said burn the paint to fade it a littlr

😂😂😂😂

Just a bit more high build primer... and jobs a goodn.

even as a nonpainter, this hurts as well. can only imagine what you feel.

I have a fraction of your experience but this video still made me cringe. However, Cleat and squirrels positive energy is really awesome and makes this video a lot more enjoyable.

First try ? THEY painted a helicopter !!! Did you paint a helicopter ??? 😁😁😁

What the hell have you been painting? haha

I knew that would happen as they are not solvent resistant. I was just waiting to see if they'd make it into the gun or not before they started leaking!

Let's not forget the door handle and keylock they heavily over-sprayed. loll

Cuz the tape job was phenomenal

@@RyanUpchurchsFavoriteChannel And the rear 1/4 window. Has a nice 2"+ paint stripe on it!

Cleetus & Squirrel, the new Earl Schieb of the younger generation, “ I’ll paint any car any color for twenty nine, ninety nine”! Get in line because Cleetus & Squirrel will paint YOUR car Any color for just $4999.00! What a Deal!

Me too brother

Freaking paint booth is so tiny 🤣

Confidence is through the roof! 😂

I was cringing at every step

I was cringing at every step

He knew that way too quick too😊

@@JoshJackson13 yea, a bit SUS ? lol

Just scrolled to find your comment since a bot stole it but smart idea lol

​@@GuitarRek_Films same Hahahaha

@@GuitarRek_Films people defending the bot lmao

How does the bot have more likes than this original? I know how. The but has a picture of a woman and some dudes are freaking SIMPS. They defend the bots. 😂

@@randyd9414 like how r they so dumb

😂😂

This is exactly how I think about doing things when I'm pissed at my bosses 😂

Yeah, I heard Maaco has been trying to hire them real bad. 😂

@@mikehunt3222 I don't know but I they might be over qualified for Maaco 😂

Was wondering the same thing.

his daughter made post on the cleetus fanpage saying hes doing fine

@@randyd9414 that's great news ☝️

@@randyd9414 good to hear

Yeah he’s great.

😂😂😂😂

I know most of these guys have talked and pretty much know what the deal for the videos are but Cleeter was honestly about to shit himself in fear when JH hit reverse!! LOL

@@warrenmichael918 Im convinced JH is one of those friends you don't want to be anywere near. I got a friend like that. You dont wana ride shotgun in his shit, just stand back and enjoy

@@Local11Sam i think these guys are pretty close off camera and the on camera stuff might seem far out sometimes but its mostly discussed before hand. Even when they go full send, i think its all understood and accepted. But youre right about just standing back and watching where it goes! LOL

@@warrenmichael918 the tackle in towing video. The taser. The full send reverse. All shit that looks unscripeted and just rolled with.

it's always amazing when you get to learn from the best like these guys

I understand where your coming from, but Hibachi Paint & Body weren't going for perfection haha

I feel ya brother painting cars for a living makes you look at this different lol glad there having fun but! Lmao

what are you talking about watching them mix the paint was too painful to watch I had to skip through it

I still believe this is more of a joke attempt than serious.

He was probably having NAM flashbacks when they unveiled the Cleetus & Squirrel finished bodywork.

@@FarmerFpv bro has made the same awful joke on multiple comments... Nice one mate

YET

They haven't gone over a speed bump yet 🤣💀

@@neithertwosturrr3016 speedbumps? JH just smacked it off his burnout truck!! haha

The El Camino is probably worth a good chunk if it was fixed correctly LOL

@@Duttylove_Racing Yeah before it got wall tapped two times.

One of the best additions to the channel!

​@@fubar1217 been saying that since day 1. George is what made jeremy's channel imo. The tuning was cool, but george was the show. I knew itd be a great combo when he joined cleets channel.

The mixing ratios had a few question marks, 🤔 too funny.

@@polygaryd Sometimes just his laugh adds so much!

Last I can remember was when James drive the Dale Truck (it's in the video where they first started it with the LS7)

When he crash the Mountain Dew boat

They made a t-shirt out of it... 😂

Really glad they didn’t kill him right away in the Fiero.

@@mattwilliams3456 lol

Better than harbor freight guns....however about 1 in 6 or so of the cheapo 25$ ones spray like a champ. Have one that must have been put together on a Wednesday right after coffee, rather than Friday at 4, and it lays down paint so smooth it makes me question why I ever spent 10 times that on any spray gun.

I want to hang out with a group like Cleet n crew at any age

Yep when you're old you need young people to keep you alive. That's the reason why most old people die a few weeks after being put into a retirement home

That's why I just got to stay moving just keep moving never stop

It’s obvious that he is currently fighting cancer. He’s wearing an Activ Portable Chemo Pump. Just have to pray he gets through it.

we dont deserve ol cleet

Didn’t even realise until I saw this comment made *trying* to organise the workshop a hell of a lot easier

I guess he couldn’t afford to pay the fee 😅😂

Wtf

The new rustolem X2 tall can would of been perfect for this 🤣🤣🤣🤣

​@@doktorzasinuseyeah, i was gunna say.. they missed a chance to roll on a primer or base with a paint roller😂 Im a spray painter still, started automotive now im on boats and do "roll n tip" method on the older boats that come in. People would be suprised as to how good a finish i can get with a paint roller and a brush on hard surfaces like GRP or wood. The secret nobody on youtube is telling you all about the tipping part is you need to soak the brush in the thinners/reducers and dab it in the paint then pull it back out quick and let it dissolve into the brush with the thinners. When you do this and start tipping with the brush it puts enough thinners on the forming paint skin that it acts as a flattener. Needs judged correctly though so the brush is always gliding never grabbing the paint & pulling at it. Do it for a few hours and you will realise when you need to re-dip the brush in thinners so it glides again. Strictly speaking the tipping brush amounts I maybe use about 50cl of paint dissolved into a pint of thinner to do an entire hull of a 16-21ft boat. I can roll & tip a can of paint better than someone with decent skills doing a rattle can job. I can totally believe the decent Home Jetwasher applied finishes on youtube but you're gunna need to be at least decent Spray Painting skills to get that to work good.

yeah once I got to the second half of this video I genuinely could not stop laughing, I was already entertained loads in the first half but it really kicked up a level with JH n stuff lmao