Well done for your great video. 2 things to highlight: 1.There is very good Reason for the back page being put on the top, this is to help prevent the pages from falling out as the Back page is then on the straight edge of the spine ( (Good to use something a bit thicker for the Back Page) 2. in order to stop the pages coming loose you can push each of the rungs manually so that they pass each other Push manually a little more than the machine closes them, but in order for this to work The Back page MUST be the last one you put on. So that the Back page stays on the back of the spine, which then guides the spine & gives every other page the ability to turn smoothly. Hope this Helps

This is by far the most comprehensive guide of the machine. I saw a ton of videos and they explain very little about the guides and the crimping at the back etc.

Thank you so much for all of this great info! You did a fantastic job explaining and providing great tips! 😁 oh yes, and absolutely love the beautiful guide you created! I really need and want to make one! 😍

This is incredibly helpful. I just got my cinch and I'm going to set up the guide book like you did. Really smart idea. Thank you for sharing.

So glad you talked about liking the spiral instead of the of the wires that go in the square holes. I was thinking I'd prefer the spiral like you used. I'm thinking of getting this. Your demonstration video is convincing me that this is the cincher I should buy. Thank you so much!~ Wish I could give you 100 thumbs up!

By far one of the best tutorials on this new Cinch from We R Memory Keepers.

Great tutorial! And love the template book. Thank you for sharing!

Thank you so much for sharing a great tutorial and I love the handy manual guide you made. 😊

Thanks so much for this wonderful tutorial. I made the guide book, wat a great tip. Maybe I have a tip for you about removing the tray with punch outs. I frist remove the cartridge and then gently push the tray out from the insiders. That way the punch outs don’t fly everywhere . Best Regards, Mirande

As usual another great tutorial! The notebook guide is GENIUS‼️

Your tutorial is amazing! So helpful and exactly the information that I was struggling to find. Great job explaining everything and making it make sense. Thank you!

This is such a wonderful and informative review/tutorial! I love the reference notebook. Genius idea!!

Great video! Thanks for all of the tips when using the multi cinch!

I bought that exact one with all the punches too my first clinch thank you for the video

Thank you for this very clear and helpful video! I bought it and haven’t tried it out yet. I’m so glad I found this video! 😊

I found your channel a couple of weeks ago and I really enjoy your content. You really enjoy crafting and it shows. Of all the reviews I’ve watched about this mini Cinch, yours is the most comprehensive and the most easily understandable. Thank you!

Great tip to align last punch....I tried it and it works great.

Thank you so much for your amazing and wonderful demo and review of the multi cinch I been looking at getting it and now have more of an idea of how it actually works lol😂.

That cheat book is amazing! Something I would have done myself had I thought of it myself... A light bulb moment so to speak lol. Thanks for sharing!

Great informative introduction to the multi cinch! Thank you for sharing your discoveries. Your punch guide book is brilliant and helped me to understand how to make this tool work for me. Really good tutorial.

Thank you, thank you, thank you for this video. No other video that I watched told me what the marking meant to get perfect alignment. I appreciate this. I’ve been struggling to figure this out.

Thanks so much for this wonderful video. It’s the only useful video on the MultiCinch that I’ve watched.

You are so clever. Love the template guide you made. Such a time saver and paper saver if you think about it. Great video! ❤️👍

Excellent tutorial! Thank you for doing this!

Just got back one. This was very helpful! Thank you!

Glad to see you are able to make longer videos! yay! I have a brand new Cinch purchased years ago and never took it out of the box!

What a great demo....thanks...I have one of the first ones that were sold. I love my Cinch machine. I have complete several scrapbooks with mine....thanks again for sharing this demo and the hacks were good....😊

What a great video! It's more than just a tutorial; it's an intimate guide! I bought the larger Cinch in 2019 with plans to bind my custom baseball scorekeeping sheet into books, but then baseball season was delayed for months and in the meantime, I learned how to bind books with thread and I never got back to the coil project. I'd still like to give it a try, but I really wish I had this newer model with different cartitridge options and a smaller footprint! I probably will cave and pick up WRMK's book binding template tool-at least that will slide into a drawer.

You are so smart 👍🏻 Great video demo.

Fabulous instructions and tips, thanks for sharing! I have the larger one and haven’t taken it out of the box. 🤦‍♀️

Hi Thanks for sharing a really helpful tutorial 👍 I am so glad & very happy I found your crafty craft channel because whatever you are demoing you always do such a super duper fab job all so wonderfully clear step by step from start to finish 👍❤️🙂

So helpful! Thank you . 🙏🏻

Great tutorial Sweetheart. Ill be getting mine soon. so nice i can go back and watch it again .hugs be safe

Fun video (and longer too - yay!) I have the Zutter Bind-It-All that I've had good success with. However I really like the WRMK spiral which I would probably exclusively use. So many tools, so little money haha.

Hi, thank you for this detailed information! I am looking trying to decide if I want a 2nd hand gray & yellow Cinch & a multi or just one or the other…I am closer to deciding now. This will be my 1st time using these machines. New subscriber 😊

You’re great at tutorials! I just found you and you explain and show everything so clearly. Your guide book is genius! I’m so happy I found you and can follow your channel to see all your creations!

Great tutorial! Thanks😊

Hi Tammy. Good review of the mini Cinch. I have the larger Cinch. I have made lots of notebooks with it. I do hide the binding inside and do not have any trouble with pages falling out. I think I need to get some spiral binders.

Such a great tutorial! Thank you so much

Thank you! I was really struggling.

I just got one of these and not sure about using it. I wanted it because we have a wedding in our family later in the year and thought it could be useful . Your video is very helpful. Not sure I understand your guide , but I'm guessing after starting to use this punch it will make since. I understand your goal with the guide. Thanks wish me luck on using the Cinch. I'm 73 years young.

Thank you for this video. It was very informative.

Best tutorial I have seen yet. I have a Mini which only uses square holes. Can I use a spiral wire instead of the binding wire. Your are right it is better. Thanks

Excellent Instructor

Great how you explain and show how to crimp wires to form the closed binding

Great demo. I have a binder machine I have had for years. Don’t remember the name. The binding for it are all plastic. The cinch machine seems more complicated. I can bind 2-3 inches of paper at the same time. I don’t think I will be buying one of the cinch, but it is handy.

i just made 2 wire ones today, thanks for your tips especially on the infor what each punch meant with the info on the side i cant see so i use my cell phone by taking a pic so i can read them...i just got my cinch was hsn also,they are out of everything at this time so i had to shop around for the seperate punch parts .someplaces are so expensive!!! I have them all except the square ,stll waiting for my bands to come to try that style ,I love the stitching oone too...and made 1.

Thank you for mentioning that the cinch is not adjustable. That’s a dealbreaker for me.

Great information.😊❤

Great information 😊

Great tutorial 💕🤗

this is another must have thanks for sharing

Wow that’s so cool!

So helpful. You should sell the guide you created.

Thank you!!!

This is a great video!! I cannot find where to purchase the multi cinch. I have looked through previous comments to know if anyone else has asked, can I purchase one of your vide books or will you share the instructions and materials used to make yours?

I have the disc binding cinche one and it annoyed me that it wasn't center aligned. my husband added a paddle pop stick to my guide with a bulldog clip it is even now :D lol I was thinking about 3d printing an added guide but I don't have to. thank you for your tips. I wrote my last comment before I finished watching the video.

Love this video! Informative, thank you!! What size coil- continuous wire did you use, I’m want to try it, I don’t like how the others pop open after time

Good information 😊😊

Thank you for video, I wish I had known it only did the 5/8" binding, before I bought, theyll prob come out with one later thats adjustable. but in the meantime I guess I can use my zutter bind it all to use ather size bindings.

Great tutorial! Do you sell your guide book?

Nice demo and review! Sad WRM has issued another shoddy product (Disc Cinch has issues too). Holes were not centered on your initial sample and the circle cartridge should've punched your copy paper cleanly. The Disc Cinch doesn't punch centered holes unless your project size is a whole or a half. IMO, that alignment guide is the culprit and its flawed. At $149.99 +, you should not have had to create a template. I have the Version 2 Cinch and that machine works perfectly every time.

Hello again. I have another question for you. I also bought the multi cinch and 7 cartridge bundle last week. It came today without any packaging, just the items wrapped in bubble wrap, instructions, all inside a brown shipping box. Is this how they sent yours? I see the we r memory keepers box in the background and was wondering how yours came. Thanks in advance 🙏

Just wanna spread the word! Hsn has the ENTIRE KIT on sale for $179 right now! WITH EVERY ATTACHMENT!

Hi Tammy can you demonstrate the rubber band cartridge punch. I’m having trouble using it?? Thank You for your help

Can you make 4:1 holes by using 2:1 spacing and then going back and doing additional punches between those?

what a great video!! thanks you so much for this!! btw where do you buy your plastic spirals? thanks!

How’s that one called? I have the mini cinch and you can’t change the hole thing. Where did you get that one?

Hello there! I saw that you mentioned that it can punch up to 2mm thick. Can this handle chipboard that thick? What other stiff materials do you think it could handle? Acetate maybe? TIA ❤

Great Demo & Information, thank you!

What if you need to undo the crimped/bent booklet to either add or take away a page?

Hi, how much inches from the left side of the paper untill end of the gaps? I mean, I want to design something on computer but I have to know where the gaps would be, so my design fits perfectly. Hope you’ll answer🙏🏻

Great video, love all your tips and tricks, but I did not understand your hack 🙃

I have the mini. Can you purchase the different cartridges? Or do you have to purchase the machine so you can swap out the cartridges?

Can you explain please why in the first example that the holes were not equally spaced at the top and bottom ?

tips on cutting though chipboard

❤😊

That machine you can cinch pages 8x11 and larger?

Where did you get the disc cartridge?

link to all supplies pls

Hello.how to get this set?

I am at the point where I am going to give up before starting. I have all the supplies just not the tools themselves. I am trying to decide which one I need because trying to get things shipped to Canada is so ridiculously costly

I'm quite sad it only holds 5/8 wires/spiral. I needed bigger ones because my projects are thick. 😢

When will they be available?

What size coil do you buy?

Where did you buy this? This model I could not find on Amazon or HSN. And does the punch attachments come with it or do you have to purchase them separately? Love the video, but it would help a lot if you list where you purchased them from. Thanks😊

it annoys me that the top hole is a different space from the edge of the paper from the bottom hole. I want the holes even on the page. It isn't worth the price.