We’re Building The BADDEST Can-Am Outlander 850 On YouTube! This Thing Will Be NASTY!

We’re Building The BADDEST Can-Am Outlander 850 On YouTube! This Thing Will Be NASTY! | EP1

Рет қаралды 2,767

Ай бұрын

Like, Comment, Share, and Subscribe!!
This week on Let Dirt Fly, we begin the build of our 2020 Can-Am Outlander 850 XMR. Recently, we found metal shavings in the oil, so while were rebuilding it, were doing a full high compression 850 build! We're also completely changing the color of the quad as well to give it a unique look! Follow along as we build the Baddest 850 on KZfaq!
Save money on the products we us! Use our discount codes below:
- Perfex Industries 10% Savings : Letdirtfly10
- TowCord Timmy 10% Savings : LetDirtFly
- Dooplicator 10% Savings : LETDIRTFLY
- Fodsports 12% Savings: LETDIRTFLY
- Kong Motorsport 15% Savings : #LDF
Follow Us On:
Instagram - letdirtfly?hl=en
Facebook - LetDirtFly
Subscribe to our friends!
@ADVENTURESThisWay
@AmotorB
@j-muddy93
@theben4x4
@ScootersGarageYT
@XMR_Mudding_420
@loudnproudatv3502
Sponsors, Affiliates and Supporters:
- Perfex
- Quad Logic
- DP Brakes
- Kong Motorsport
- FodSports
- Novawinch
- Dooplicator!
- Towcord Timmy

Пікірлер: 30

@B1ou1nsGarage Ай бұрын

Ole Micheal is gonna point ya in the right direction and Blaze

@TaylorBonnett Ай бұрын

oh yeah 100 percent lol but the 12500 rpms is a little stretch lmao

@minnesotaxmr Ай бұрын

You got it split, upgrade everything. Like YOU said "It's only money. Roll the cameras, can't wait. "Ride Hard and Be Safe" Minnesota Bill

@SimplyOffRoad Ай бұрын

Let's goo. Please show us dyno numbers. Build process. There is little to no information on what to expect with these vtwin can am engine builds.

@j-muddy93 Ай бұрын

You may have the baddest 850! But, I have the best self driving 850 lmao 🤣 Can’t wait to see it done!

@252OFFROAD Ай бұрын

Also, the guy on the blue renegade in your clip, I heard he ain’t s*** and his breath stinks. But he makes a banging Buffalo Chicken dip 🔥

@LetDirtFly Ай бұрын

I heard he works out of his mom’s basement. But I gotta try that dip 😂

@philliplucke1339 Ай бұрын

Can’t wait you guys are awesome

@B1ou1nsGarage Ай бұрын

Also if it helps I have a 850 crank and rods all oem if ya need em. Currently swapping to a 1k build

@Story53s Ай бұрын

Are you going to swap to the bigger trans that has lower gearing? Like the 6X6 or the xmr Rene 1k?

@jimbo_patt Ай бұрын

Gonna give'r the ole Brapplejuice huh? Extend the rear, portals, 52s, when does it end 😁 Yall gonna ever get Zachs snorkel installed/how to vid? Hiw am I supposed to install mine if yall dont show me what NOT to do 🤣

@theyzoomers Ай бұрын

Can it really ever be any better then Brandon price big outty

@LetDirtFly Ай бұрын

His is a big bore build, not stock bore lol.

@coldsteelkt Ай бұрын

Hi guys, love you videos, are you going up to tar Hollow in Hancock, New York for the 1 June opening weekend?

@LetDirtFly Ай бұрын

We didn’t plan on it but it’s not too far from us. How’s the mud up there?

@coldsteelkt Ай бұрын

@@LetDirtFly yes they do. They have a swamp area that gets pretty popular during the day.

@jamesjanzen9806 Ай бұрын

My brother’s 2022 850 outlander with just an exhaust and tune makes 93hp

@LetDirtFly Ай бұрын

Most likely to the crank if he’s lucky. We’re talking wheel horsepower.

@outerlimitzog Ай бұрын

What happen with the renegade?

@LetDirtFly Ай бұрын

As you may see, she ain’t in the garage. You know what that means 😜. Video is hopefully going to be out some time next week!

@adammccraney1758 Ай бұрын

Doesn't stock 850xmr have 78hp?

@BlaiznTrails_Performance Ай бұрын

To the crank not wheel hp

@canadianatvlife Ай бұрын

✌️🇨🇦

@Mud_Dragon Ай бұрын

Put some nos on that bad girl.

@graydonanderson5071 Ай бұрын

You can’t spin a can am engine over 10k rpm the clutches would explode etc even at 10k good luck trying to keep it together

@LetDirtFly Ай бұрын

You sure can sir. All comes down to setup and knowing what you’re doing. The guys I’m working with have engines that have lived at these RPMs for years. This build will probably not spin that high. It all depends where it makes peak power when it gets in the dyno.

@graydonanderson5071 Ай бұрын

@@LetDirtFly if you can show the rpm on a pc5 or equivalent maybe I would believe it lol I know several guys that are full time racing and they usually stick around 9500

@LetDirtFly Ай бұрын

@@graydonanderson5071oh yah I’m probably not going that high. Depends on where she makes peak power. The stuff they run runs over 10k with most stuff. Mine will probably be around 9k I’m guessing

@252OFFROAD Ай бұрын

You can indeed spin a Rotax motor 10k+ rpms. Mine has been living at that range for past 3 years, with a CVTech primary clutch. Now is it feasible? Probably not but the machine still makes/gains power at that RPM, and further most, sounds pretty gnarly on nitrous 😂😂😂. I have some date logs of her hitting 12k. Problem is the crank flex’s so much it’ll knock signal from the crank sensor sometimes. But we like to party 🔥🔥🔥. Stock bores ftw 💯