you never showed us if the sink works

I don't think I've ever watched a 28 minute you tube video from start to finish. Great job. Very entertaining and what not.

The SeaSwirl is a under rated boat. These boats are highly sought after in Australia due to extremely robust transom, and sea worthy characteristics. The 1999 19' boat saved our lives when a storm on Kootenay Lake, British Columbia developed a massive wave formation of close spaced, perfect waves in a Sine patern in every direction. Literally I saw a wall of water heading towards us on a perfectly flat lake. Later learned it was a rare " Non Interface Patern" wave. At 9 feet from valley to crest. Other boaters in beaters and a few nicer bigger ones had to beach as occupants had to hump off boat to shore while not getting smacked by their boat, or pulled back in by waves..... craziest thing I've ever seen on the water of coastal and lakes, we thought we might all die that day.

That Publix bag holding spare parts is the most Florida thing I've ever seen.

The drone footage on the water with the sunset is epic. Keep up the good work.

What a good deal for the boat. You really cleaned it up nicely. I might go buy that glossy stuff now

Great video! Incredible restoration. Loved how you’re flying through the channel at 22:42! Nothing better than being on the water when it’s smooth like that.

Love how you restored this boat!! My hubby an I use to have boats but we're older now and can't go boating, unfortunately. TY

I was really impressed with the gel coat polish pads. Thanks for sharing that. 👍Big difference and easy too.

looks like a smurf was murdered in the cabin lol

Watching your channel is so inspirational to me. Really gives me the confidence that I can tackle a small boat project.

You’re such a natural you do a great job on your channel just wish you were posting more video this is one of my favorite channels

Way to go guys on the deal of the century. Good to see that there are great deals out there for all of us to find, and that there are boats out there that we can revive. Just one note that I feel the boat may need based on your water trial. A good set of adjustable trim tabs. All you need to do is add a good set to even out the ride. Noticed a need for some support on the starboard side ride to even out the overall performance of the ride. Keep up the good work. Power to That Boat Guy!

I don't know what I like better. The boat or the awesome camera footage. Great job on both.

Best video yet! Love the style of boat and you guys did an amazing job. Thanks for sharing!

AWESOME !!! I was hesitant to splatter blue paint in the cabin....it is BRILLIANT..BRAVO !! LED lighting looks GREAT too !

Y'all really did a GREAT job!!!! I'm impressed!! I thoroughly enjoyed the video!! Can't wait to see the next one!!

Man I love these projects. Keep up the great content and let me know when you are ready to add a full-time employee. 20 years in corporate America is ENOUGH! :)

Glad I found your channel. Love watching these videos while I wait to pick up my new old boat after winter.

You guys do amazing work, attention to detail is spot on. Wish I was in Florida!!!

You guys have done a fantastic job. Loving the splatter in the cabin turned out perfect. Keep up the great work and videos.

Excellent job filming I appreciate all the hard work plus filming and making it all possible for us to enjoy it thank you

Very helpful video, I'm just starting to look for a 22" used boat, I'll check out your other videos. cheers mate

Wow man. Looks great... makes me want to go out and find an old one to restore. Love to see something that old in such good condition. Thanks for sharing.... I subbed.

The tandem axle aluminum trailer alone, as is, was worth more than $1100.00

Great job👍 I used to have one of these up in Seattle , mine had a 4.3 V6 inboard/io😀

I really enjoy your videos primarily because I appreciate your business model and how you’re able to assess the boats real value based on your skill set to restore it for a profit. If I lived in Florida I’d be looking to buy a boat from you. Keep it up and good luck.

Almost wish the video to 4x's longer - would love to have absorbed so much more of this story in detail. Well done. I'm thinking about doing the same thing, so good to see a beautiful result.

Love the vids , That polish gizmo is pretty cool . Thanks

Hello from Arkansas! Always love the uploads. Keep it coming brother! Always checking your channel for new uploads.

Really enjoy the video,,,reminds of days gone by, ♡I use to travel from south Louisiana to Panama City to buy used boats from my friends boat DEALERSHIP. My favorite was restoring 1973 Chrysler Conquest boat 90hp,,motor ,,and Trailer,,All Chrysler. ♡

Like what you guys are doing. I'll check out the pad thing. I live on the west coast northern cal. in the heart of the delta and I've bought an old 67' glasspar and am restoring. You are giving me ideas. I don't work as fast as you guys (79 yrs old) but if all goes well I'll be back in the water soon. Looking forward to your next video.

Love the vids. Protect ur new canopy..storm coming. Love watching a local channel. Keep it up.

I live in the Southern Nevada Desert, and I would PAY for this restoration ! Excelent Job Guys !

Outstanding work guys!!! Thanks so much for the inspiration!!! Buried in projects here in New Jersey!!!

Great work guys!! I have a similar one with I/O and did a similar restoration a couple of years ago, i liked the idea of spraying the cabin, i actually did the all cabin with foam pads and vinyl and ended up to be way too expensive, one thing i would have done thou is the electronic box on the right end side of the cabin , i see you left the carpet but was worth to upholster it.. overall great job!! Big thumbs up!!!

When you said you had a buddy coming over to paint it...then next clip was a dude with a rattle can spraying it, I was dying🤣🤣🤣 until I realized he was just priming it.

Your neighbors must love you lol. Great job!

Again, your closing shots are really good. Another great restoration. I’m not a boat guy. At all. I like what you do so I’ll keep watching.

You guys knocked this one out of the park love the paint jobs! Splatter and all!

Harbor Freight shop fans work really well as well, a lot of power behind them for cheap

This is awesome. The transformation from start to finish shows the work put into it. The paint job ya'll did to the forward cabin was right on target IMO. Did you put this boat up for sale? Subscribed

I've been a car detailing kinda guy. But gotta say I'm hooked now on your channel. Great work. Guys are talented.

I'm glad you kept all the bloopers and goofin around.

That cabin looks great, very 90s

subscribed, just what I needed, one more expensive hobby to follow. Looks like a great job yall.

Nice job guys. Fun to watch it come along so beautifully.

Great video - and what a fantastic buy! Well worth the time and money spent to get an exceptional craft. The v6 motor sounded sweet! Subscribed!

Beautiful footages in the end ! And the boat looked great

Man you definitely could turn that for a profit! Makes me want to go look for a cheap project boat! Very nice!

I’m just thrilled that I found some smart decent people from Florida. I’ve watched 5 videos so far and I love it . I’m in Montana great content guys

You got an incredible deal, it is also best to use some naval jelly and a brass brush or brass pads on stainless such as the sink, also use a powdered bleach such as comet as it contains a substance known as DE (diatomaceous earth) that is volcanic ash and it polishes stainless instead of scratching it.

Wow, it's amazing how location changes the prices so much. Where I'm from that would be a $5000 boat all day long, probably needing more work and with dry-rotted trailer tires too. Well done and whatnot.

That paint splash is really cool!

Great Job!! Excellent drone footage too. You guys did a really nice restoration.

I know you make money on them, but thats a labor of love. Its evident as you speak, that you enjoy the restoration process and bringing things back to life. The end result looked amazing.

The LED strips from Home Depot are a little more expensive but the glue on them is crazy strong.

Love it! I’d Peel off the old graphics and put new modern ones on.

Great job going over the components. Thanks!

Seaswirl was an Oregon company located in Culver. They made some great boats, we have a few still running. Great to see someone restore one.

i covered the walls and ceiling of my bow inside with spray foam and carved out a cave effect and spray painted it and installed lights.

One question, how long was this project? That looks amazing!!! Fantastic job!!

👍Looks terrific. Got yourself a fun small bought. You splurge on giving so much detail to the out motor that I just don’t understand why you decided to do the paint splatters in the cabin (but hey to each their own…I guess that’s just a personal decoration type thing). 😂The most important thing is it floats & runs really well. 💝

That is one excellent video. Thank you.... it inspires me to go ahead and do the same to my 2005 Sea Hunt, 22.5 Victory with cuddy and same walkaround!

This is the best thing i've ever watched

Some 3M double-sided tape will work wonders holding up those LED strips. :-)

You guys did a great job the boat looks nice and that Evinrude you did an awesome job I've never had a problem with Evinrude so they've always been a good reliable engine.

Great price on the boat good job! I have watched Alfred Montaner channel with the verado motor that was submerged, I saw him use those pads on a boat that buffer looks like it does a good job. Keep up the videos I just subscribed to the channel..

Wish I could find a boat like this at that price, “jealous”

Boat needs some trim tabs and it would be a perfect little runaround for fishing and diving.

You guys do awesome at restoring boats! I didn’t want to sound all negative! I’ve grown up with boats. Great job guys!

Great work guys. Absolutely fantastic that you redo boats like this. Hope you made a good profit after selling her. Cheers

Beautiful boat, and the scenery is wonderful. You have much talent.

Nice boat, i like the picasso cabin looks good lol. Maybe better put the top down, if your going faster... What does a water seporator look like?(need one)

The splatter paint looks awesome - Always great to do more, with less - Good work.

Wow great job,boat looks great and for what you paid another wow,hope to one day get me a boat for my kids.That would be a great project one day...

Great job! Who did your cushions? I'm local and need some reupolstering work done.

yep amazing price for the boat, you got a great deal bro!

Wish I could scoop some deals like this up in Canada. Nice work guys!

You guys did an amazing job! Turned out so beautiful!

to glue the lights upside down in the interior I always use 3M double face tape for exterior use. it will never come off

Not sure why anyone would give this a thumbs down, but love the videos man!

Great find. Great job. Great drone shots!

Hooked on these videos. I’ve always restored here and there but a solid group of buddies lending a hand would be sweet!

"Alright eric so how's this cabin coming along?" 😂😂 couldn't stop laughing!!

It’s a awesome boat 🤣 I think I saw. “Go Daddy” on the side but your a awesome dude and you should always be making these amazing videos

WOW, Just amazing work guys!! Perfect size and sweet boat

Not even a boat guy...yet, but I enjoy watching these videos. Nice work y'all!

Nice! Your videos inspired us. My dad and I are about to restore an aqua sport osprey 175

And u- Guys accomplished all that work in 27 1/2 minutes :-) She looks good and runs well.

Thousands and thousands of boats in that situation in Florida. You guys did an amazing job, as usual! Very rewarding I'm sure! 😉😎👍🏼

Great clean up! $$$ it is a completely different boat yet the exact same boat. To lovely

When you pulled the knob off the grill I died 🤣

Finally something good in recomendations

Dude your living the dream! It seams boat here in the Southwest aren’t available enough for projects. l imagine boats are more plentiful in Florida.

Really nice job bringing her back to life. I enjoyed seeing my home waters when you launched. My boat is home ported across the street at Bay Pines.

Love your vids!! Might hit you up one day to do a boat for me. I'm in San Diego but dont know of any auctions here.

A year later, I see boats like this on Craigslist. "Soft spots on deck, engine seized, $11,000."

I love this video. Please continue saving more Boats that needs more love.

Congratulations well done. liked painting in cabin 👍🏻 Nice lines on that boat. Kind regards 🇸🇪