We Start To Finish The Stew Mac 335 Kit Guitar... With Cool New Paints!

Рет қаралды 13,573

Жыл бұрын

StewMac Partner Account...stewmac.sjv.io/LPJz4j
My AMAZON Store: www.amazon.com/shop/texastoas...
My Website… www.texastoastguitars.com/
My Patreon Page…www.patreon.com/user?u=7149947
My Facebook… / texastoastguitars
My Instagram… / texastoastguitars
Check out our Industry Partners…
Flipside Music, The Great American Guitar Store… flipside-music.com?aff=7
Maximum Guitars… maximumguitarworks.com
NK Forster Guitars e-book, making a living from woodwork... payhip.com/b/StZf/af62c6f98f0...
Dylan Talks Tone… dylantalkstone.com?ref=texastoastguitars
Pedal To The Metal GUitars...... reverb.com/shop/pedal-to-the-... Use Code TTG At checkout
Tone Wood Experts… tonewoodexperts.com/ use code “TEXASTOAST15” for 15% off
Bitterroot Guitars… www.bitterrootguitars.com/ use code "TXTOAST" for 15% off
Odyssey Beerwerks… www.odysseybeerwerks.com
Spin Twist Paint Rig... • SpinTwist Spray Right ...
Hipshot Products... Contact Texas Toast Guitars to order all the good stuff from our friends at Hipshot
Texas Toast Guitars is an independent guitar shop and this channel is a place for people with common interests to come together and discuss their mutual hobbies, toys, and opinions. All are welcome.
Original score: Electric Boogie Dawgs & Jim Jamm Jimmy
Artwork: Joy Kaminski & Paul Shellooe

Пікірлер: 64

@theNextProject Жыл бұрын

Rear access covers are such a great thing, and anyone who poo-poos the idea hasn't fished pots n' wiring though enough f-holes. I cut them in my last build and will definitely do it again and again, what a pleasure to work on. Enjoying your progress!

@Bard2dbone Жыл бұрын

My main "335 type" is an Ibanez AS80 from the small headstock days (1993? 1994?) I got a killer price on it because a previous owner had put an access plate on the back. I can't tell if it was added on purpose, or done to cover an accidental hole because it's just a bit off from where it should have been if properly planned out, like a quarter inch or so. It's just "off" enough that I can't say confidently. But it's way more mod-ready than any regular 335-type.

@jefferywarburton2116 Жыл бұрын

A thumb pick could help the tapey tape. People who make fishing lures have been using U.V. stuff for years.

@ksharpe10 Жыл бұрын

I liked the idea of the dark with the burgundy dark red like some of those expensive PRS's. that would be cool and different. It is called Charcoal burst with Red surround.

@AnnaStafford-zh1sz Жыл бұрын

There is little pleasure to be watching an artist work. Bravo Chris. You are an inspiration to us lesser mortals.

@TexasToastGuitars Жыл бұрын

I'll let him know

@grenvillemoore2346 10 ай бұрын

Hi guys and greetings from across the pond. I’m a little late to the party but am really enjoying this build prior to embarking on my own. Was just wondering if Chris could share some info on spray gun settings…. fluid, fan, air pressure etc? Keep up the great work guys!

@TexanUSMC8089 Жыл бұрын

There are a lot of people that think certain cars and guitars should only be done in a traditional way. No changes allowed. In my opinion, if you own it you can do what you want with it. I worked on one F-hole guitar and the f-hole wasn't big enough for full size pots. If it had a plate on the back I could have worked on it. The neck is for the player, and the front is for the audience. The back is no bodies business! LOL Guitars are meant to be played and not hung on the wall like art.

@baronwilson2211 Жыл бұрын

I'm glad y'all are going with a sunburst finish! I sanded my sunburst attempt off and I'm going with a natural finish to complete the build. Be careful when you guys to get to page 7 (Fretwork / Seat the frets). I noticed some hair line cracks in the binding through its cross section in several locations, and was wondering how they got there. I figured it out after a 1cm chunk of binding broke off after hitting the 21st fret too hard with a fretting hammer. I was able to super glue the binding back on, but the fret still appears to not be fully seated. I might fill the gap with super glue prior to level sanding it.

@andrewstpierre4837 Жыл бұрын

This is just a great series. Fun and instructive - and I really appreciate the TTG lack of snobbery in presenting a kit guitar with encouragement as to how you could use a quality kit to get your feet wet and enjoy accelerated success your first time in the game. That lack of pretense and effort at bring guitar building to a broader audience is why folks stick with you. Well done!

@TexasToastGuitars Жыл бұрын

Well said amigo. These are a great way to get started. I mean... you could ruin a bunch of stuff like I did but this is better

@texastoastchris Жыл бұрын

Flattery will get you nowhere.....check is in the mail.

@TheEpeli89 Жыл бұрын

That spraying stand looks really smart!🤘 what type of steel tubing do you use, and how much space there is between the headstock and the holder assembly?

@timhallas4275 Жыл бұрын

I guarantee the tech, or whoever has to change out a pot or pickup or jack will be very happy to have a rear access opening. I did mine with magnets. (no screws) I also copper shielded the control cavity area as well as the pick-up routs. There is nothing wrong with upgrading a 335.

@jjdillon2007 Жыл бұрын

I used to own the last version of Gibson ES-135, and thankfully, it did have a rear access cover.

@DownByTheRiver234 Жыл бұрын

This is a tremendous series, thank you

@TexasToastGuitars Жыл бұрын

Thanks my friend

@rockers2rockers616 Жыл бұрын

That is a nice looking 335 build. Cant wait to see the top coats.

@TexasToastGuitars Жыл бұрын

You and me both we are going to do them this week

@rattletraprock Жыл бұрын

Digging this kit build. Kinda makes me want to play "I'm Going Home".

@TexasToastGuitars Жыл бұрын

Peace symbol not included. There are people that say violence never solved anything... to that I say, Who said anything about trying to solve anything. Oh and give piece a chance

@geemac7267 Жыл бұрын

That's pretty nice. I wish they sold a kit without all the hardware. We all want to replace that stuff anyway, right?

@TexasToastGuitars Жыл бұрын

I hear you my friend. I'ma see if I can do that

@Vern859 Жыл бұрын

Thank you 👋

@kcole4001 Жыл бұрын

Awesome video! It's cool that you highlight how much time is saved through using UV cure products, and it's better for the environment. I really think control cutouts on the back of these is a good thing, it's such a pain to rig them through the F holes (of course less so for you guys who do it more than once or twice like the rest of us). Naturally, someone wants to whine about it even when it doesn't affect them, but it's da internets, what do you expect I guess. Looking forward to the color & clear! 👍

@Sammywhat Жыл бұрын

Inspirational stuff, fellas!! Much appreciated!!

@TexasToastGuitars Жыл бұрын

Much appreciated!

@jonahguitarguy Жыл бұрын

I put a rear access into my GGBO 2022 ES-335 short scale bass build. Nobody said squat. Prolly because my YT channel is little bitty.

@AnnaStafford-zh1sz Жыл бұрын

I misspoke. There is little pleasure BETTER THAN watching an artist work. Duh.

@TexasToastGuitars Жыл бұрын

Thanks so much for watching my friend. I'm glad to hear you are enjoying the series. As far as artistry goes... I think the jury is still out. Let me know what you think after the color coats go on :)

@AnnaStafford-zh1sz Жыл бұрын

@@TexasToastGuitars As a musician and bandleader for around sixty years I found myself hiring many musicians and working many bands and orchestras. I quickly learned, if I asked a guy, How good are you? If they say, "Eh. I get by." I could put him/her on stage and they would amaze all within earshot. If they puffed their chest and said, "I can do this and this and this", they usually stank. A case in point was a guy I met in a Pub who played a Tennessean and sounded just like Chet Atkins. He did the whole repertoire. I was due to go into the studio with a short list of original tunes and thought, "This guy will be amazing." Wrong. He could only copy. He had no idea how to do anything original. Interestingly, a few years later, I wound up owning his Tennessean. The very fact you doubt your own genius and ability is what makes you so good. You are truly inspiring and I DO know what I'm talking about.

@jimmydevine4862 Жыл бұрын

Watching series for the second time! Do you UV between each coat of the sealer?

@TexasToastGuitars Жыл бұрын

We do not

@joezambrano9651 10 ай бұрын

I tell you what fellas I built one of these guitar kit I had to cut a control cavity myself due to I'm peralized on the whole left side of my body I had to cut a cavity in the back loks ugly I ruined about 3 wiring harnesses trying to get them in through the f holes with one hand impossible

@petedeen176 Жыл бұрын

In the model-making world the parts are painted before assembly. Why are guitars assembled and then finished?

@murpsman Жыл бұрын

These are glued-in set necks guitars. These necks are painted the same color as the bodies. Bolt-on neck guitars are painted separately because the necks rarely match the bodies.

@thefilmandmusic 2 ай бұрын

What do you think the cost is man hours etc ..Fab job by the way

@andysaucedo3226 Жыл бұрын

Red!!!

@1066wastrel Жыл бұрын

For the next one Andy, it has to be-no question!

@mikiegood Жыл бұрын

Very cool

@robertprichard3236 Жыл бұрын

Blueburst

@peterschmidt9942 Жыл бұрын

The guitars coming along great guys 👍 A couple of things I noticed was when Chris is spraying, you spray from the bottom to top. Any reason that you do it this way? And does the sealer/top coat you're using take stains on the first coat or would you have to use another product? And in-between coats, does the clear just stay in the gun without cleaning or you're running something through it to clean in-between? I'd imagine being being set off by UV that you could probably leave it in the gun.

@texastoastchris Жыл бұрын

I spray bottom to top out of habit - I'm not sure why. It works just fine spraying top to bottom. Maybe because I'm left handed I do it all backwards? We spray translucent base coats over the sealer before the top coat for color. That will be the next step on this guitar in the next video. The UV product can sit in the gun for hours between coats with no issue. Good questions!

@peterschmidt9942 Жыл бұрын

@@texastoastchris Ok cool! I thought it might have something to do with less runs or something LOL. I didn't even realise you were spraying lefty! So with the sealer, you could put stain on that I suppose if you wanted to, then spray your top coasts over that? I've been trying out a few sealers ATM with varying degrees of success. It's great when you actually find a product that works.

@petec4302 Жыл бұрын

Very cool series, BTW, what happened to your Spin Twist paint rig?

@texastoastchris Жыл бұрын

I prefer not to use it for anything but colors and finish - I don't want to load it up with sealer and such.

@butchlauer Жыл бұрын

Lucille might not have any f holes, but she sure does have a fine back door. Oh, and tobacco burst all the way.

@dalekitson1666 Жыл бұрын

Hi Chris, Dale from the UK, what type of knife is it? Cheers

@texastoastchris Жыл бұрын

Gerber prybrid x

@TexasToastGuitars Жыл бұрын

Here you go my friend... www.amazon.com/shop/texastoastguitars/list/2CYR0ROROK2M7?ref_=aip_sf_list_spv_ofs_mixed_d

@dalekitson1666 Жыл бұрын

Nice one, cheers from a rainy UK.

@thseed7 Жыл бұрын

🤘🎸

@aandc2005 Жыл бұрын

You guys use simtech uv clear sealer now..? I want to try that.. where can I get a uv light less money then your pro one..? I know Google search...

@TheAciddragon069 Жыл бұрын

Amazon has great uv lights for like $25 i have one for curing uv 3d prints

@aandc2005 Жыл бұрын

@@TheAciddragon069 ok thanks I'll check it out

@texastoastchris Жыл бұрын

@@TheAciddragon069 yeah, thats not the same.

@texastoastchris Жыл бұрын

If you get a cheap UV light, be prepared to be disappointed. There are UV lights, and then there are UV LIGHTS. You will turn your project into a gooey mess.

@phatmanoflove Жыл бұрын

Why does it need to be traditional? Who says? lol I vote anything but a traditional burst or cherry

@monofavoriten Жыл бұрын

you could get one of those chinese spy baloons to take the instrument up into the stratosphere for curing. plenty of uv up there. there is this rumour thats exactly where the name stratocaster came from😉

@TexasToastGuitars Жыл бұрын

Seems like a economical way to go too

@Jeffy2n Жыл бұрын

Bourbon Burst.........I'm just sayin'........

@AnnaStafford-zh1sz Жыл бұрын

Oh please. Don't paint it. Just clear coat it. It looks amazing in Blonde. Don't forget they have more fun!!!!!

@TexasToastGuitars Жыл бұрын

I do believe that but the neck laminates are forcing my hand

@AnnaStafford-zh1sz Жыл бұрын

I don't follow you on the laminates but it's not important. One facet of kit guitars is - sometimes problems at the factory force us into avenues we would normally not go. I hear you. I've built almost every electric kit StewMac offers and had to work around errors as best I could. None of them are perfect or people like me could not afford them.@@TexasToastGuitars