We Took our 3 Engine 30HP Mini Bike to the Drag Strip

Рет қаралды 311,595

2 жыл бұрын

Our 3X Tillotson 212cc 3 engine mini bike goes to the drag strip! It turns out that this 10' long mini bike makes for a great drag mini bike chassis due to the extended wheelbase. The Tillotson 212 engines are purring nicely, especially after we bypass the Tillotson 212 governors. This mini bike's top speed is more than 60mph right now, but we're shooting for 70+ mph when we install three high performance stage 2 Tillotson 212cc engines.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 639

@brianbudd8487 2 жыл бұрын

Love to see and hear how the three exhausts run into one straight pipe!

@otix3253 2 жыл бұрын

and with a big funnel exhaust lol

@williammckinney4971 2 жыл бұрын

yes please do this

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/d8h5otyA39DKfJ8.html

@Jack19000 2 жыл бұрын

That would sound nice

@maxxproductions7749 2 жыл бұрын

A 3 into 1 exhaust would be really cool to see too! Be interesting to see if it effects the power band at all with the amount of exhaust scavenging it would produce

@Grannybang35 2 жыл бұрын

Considering the engines are not timed together the effects would likely be restrictive due to the large size of that exhaust, but if they all ran off of one 3 cylinder coil that could work well...

@tomstech4390 2 жыл бұрын

@@Grannybang35 You would literally have to sync all the cranks within a degree of each other which isn't possible, Thats true for the ignition and the exhaust.

@jackmagnium6115 2 жыл бұрын

better idea. zoomies aimed downwards

@jackmagnium6115 2 жыл бұрын

but it does look booooring with no 3 to 1

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/d8h5otyA39DKfJ8.html

@toshayonguard4253 2 жыл бұрын

I see 3 stage 2 kits and 3 turbos and pushing it into the High 8’s. 🤟🏻🇺🇸

@CarsandCameras 2 жыл бұрын

Lots of room for improvement, but it was still a great first test!

@lukassonntag3956 2 жыл бұрын

Such as boost ??

@MarkSmith-wu8rh 2 жыл бұрын

A steering stabilizer , might be a good thing

@ajaygames3717 2 жыл бұрын

Hey guys I’m having a problem with my predator 212 as soon as I start it it’s want to just take off

@altaran 2 жыл бұрын

Just a heads up....there is some video/audio issues around 8:45+ and 11:30. Like the video repeats, and the audio doesnt.

@loganmbb 2 жыл бұрын

pls bring back the 40mph lawn mower

@MayheM_72 2 жыл бұрын

You can really gear that thing high with all that torque! Get'em on the top end! What would happen if you ran 2 clutches and the rear motor and a torque converter?

@905mudboysdc4 2 жыл бұрын

You’d probably stretch the chain up front

@olingerscreations3709 2 жыл бұрын

Would be interesting to see 3 completely built engines driving a series 40 torque converter and also a chained version for speed comparisons.

@williammckinney4971 2 жыл бұрын

the torque converter would have to go on the front but that will work and be cool

@kickboxs77 2 жыл бұрын

@@williammckinney4971 the torque converter would have to go on the rear. You are modifying the output speed with the cvt, and the goal is to keep the engines spinning at the same speed while changing the output to the drive chain

@williammckinney4971 2 жыл бұрын

@@kickboxs77 how would the chains from the other motors get to it and then the chain go from the torque converter to the rear tire

@WreckedRevival 2 жыл бұрын

@2:20 I use to always just run over kart, lawn mower, atv, & utv tires with my truck tire..usually popped the beads loose pretty easy lol. The harbor freight tire machines are ehh decent anyway. 🤣

@geecee4 2 жыл бұрын

I like John’s tire tech tip. Head to the local tire shop!! I agree 100%

@timothymartin5665 2 жыл бұрын

Glad to see full set of leathers on you Brother, Now Ripit up!...

@dominicoldani5287 2 жыл бұрын

Never heard a more true statement from John about tires. Spent multiple hours trying to change racing go kart tires with super thick sidewalls and was not the most fun thing ever.

@BorosTheGamer5021 2 жыл бұрын

i had a 3hp break a rod once because it wasn't governed xD but it was fun while it lasted.

@awright9183 2 жыл бұрын

Hey boys, your absolute legend's. Been so cool to go on this journey with you and see how much has changed over the years. It's funny to go back and watch 9 reasons again... Hope ya doing well Charles and the lil one is finally leting ya get sleep. I think a twin V-twin engine drag trike would be pretty cool to see. Stay well guys, keep up the awesome builds...... 🇦🇺🙃👎 Ad from Oz downUnder

@stevebarnette 2 жыл бұрын

Very cool to see the progress, development, and planning for the 3-engine bike.

@larrydavidson3402 2 жыл бұрын

Great job guys, fun to see what differences the gear changes and tire changes do.

@erkfdz2336 2 жыл бұрын

Keep up the good work guys! Looks like a lot of fun!

@darrellkelly7614 2 жыл бұрын

What a week for you guys. Incredible vids.

@allensandven0 2 жыл бұрын

I almost fell of the chair as he almost fell over off the line due to gravity not thrust ! Magnum Opus !

@3generation_racing658 2 жыл бұрын

Just want to say I love these videos and I’ve always wanted to know what some of these projects would do on the strip and it’s all around awesome thank you for the content!

@deebo3864 2 жыл бұрын

I havent missed a video since your C6 Corvette review, which i believe was your first or second video. These years have gone by fast and to see what you guys have turned this into is beyond extraordinary!

@kennyking6325 Жыл бұрын

Friends, What a sweet mini drag Bike! I feel that direct sprocket couple the three engines to a torque converter clutch jack shaft. Then to the wheel might be super fast! Thank you

@ryankopera7505 2 жыл бұрын

Love the mini bike content! You guys got me into mini bikes!

@CarsandCameras 2 жыл бұрын

Love to hear it🤘

@angelwarrior8019 2 жыл бұрын

Nice work. I'm very impressed. Much Love. Much Respect. 👊

@Lord_Verminaard 2 жыл бұрын

I can't wait to see you guys modify this thing. Higher engaging clutches will help it get off the line too. It's gonna be really fast when modified!

@BennyTygohome 2 жыл бұрын

Love this channel, you making so much good content with all the cool bikes and carts you've created from scratch.

@deanrandall8542 2 жыл бұрын

You guys look like y'all are having a lot of fun! Good luck with your build, and be safe out there.🏁👍✌️🤞🇺🇸

@johng6673 2 жыл бұрын

Love your work and videos! Now, a larger tire adds more rotational mass, which means the initial launch is harder to get moving but helps with the top end. That's why they invented wrinkle walls. Small diameter to launch, but expands for top speed. In your case, I would stick with a smaller tire and just work with the gearing to get that bottom number quicker. Just a trial and error thing and what you desire. Getting off the line is only the first part but also one of the most important. Maybe find a tire in the middle of what you have and work with the gearing

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/d8h5otyA39DKfJ8.html

@ronkelso1632 2 жыл бұрын

Well guys keep up the good work looking forward to watching the shop show and the two-stage motor build

@botchman5947 2 жыл бұрын

Starting to love this bike. Lol still having heard no one mention the new 212 ghost.

@charlesgraham9954 2 жыл бұрын

when u was talking about building a garage, i specifically told u guys to go bigger. lol i built a 40x80. within 5 years i wish i went bigger. keep living the dream and bring us good content to watch. joking aside, i apricate u guy for taking the time making these videos for us.

@isaiahgreenfield6815 2 жыл бұрын

Can’t wait to see what it does with a stage two on it great video 👍👍

@gdawlton 2 жыл бұрын

I agree with Mopar Casey, get some stiffer springs for the clutches, the engine will wind right up at the x-mad tree and after that... Better hang on.

@mlindsay527 2 жыл бұрын

Yep.

@jameswarren423 2 жыл бұрын

Three hot motor sounds pretty good to me can’t wait to see that one! Excellent first ride though and great video keep up the great work👍🏼🤩💪🏼

@littlehawk9322 2 жыл бұрын

you should link the engines by one chain timing the firing order 120 degrees apart like a inline 3 cylinder and see if it improves the power

@debragibson3489 2 жыл бұрын

Fantastic testing machine.....keeeeep changing it up!

@roryvansickle4331 2 жыл бұрын

Had a similar "fuel starvation" issue with a 212 predator motor after bypassing the governor, go down the road wide open and it cut out like it was out of fuel. I found when i cracked the lid on the fuel tank i didnt have that issue anymore, it would catch back up and run fine again. Torque converters on all 3 of those motors would be badass

@repsol6198 2 жыл бұрын

Enjoyed visiting with the Cars and Cameras fellows at the Pate Swap meet in Ft Worth, Texas last weekend.

@PeelePowered 2 жыл бұрын

Love Piedmont Dragway!!! Very cool track for mini bikes and anything you can race lol

@kencapps586 2 жыл бұрын

Been going since I was a kid and at 47, I go every chance I get. As a kid, I remember seeing people watching the race for free from the top of those pine tree's across the street. Lol

@Ty-bz7zx 2 жыл бұрын

Looks totally safe and sturdy ! 😆

@JohnHill-jm7tm 2 жыл бұрын

Another great video guys. This Old Man always enjoying them. Waiting for the next one. Love you guys. 🛵🧔💝💝💝

@jimglasscock8169 2 жыл бұрын

Best Tech Tip ever, John.

@scoobydew420 2 жыл бұрын

I'm really enjoying the field trip content recently. It's nice to see some of these machines get to stretch bout their legs.

@wildman8215 2 жыл бұрын

Awsome episode! looks like yall had fun

@BustedKnucklesBuildsTexas 2 жыл бұрын

Great job guys !!

@mxwizzard 2 жыл бұрын

Guys I love all the track videos I hope you keep doing them and maybe do some more test and tune on the mini bike to get better times anyway thanks for the videos keep up the great work

@RearEngineShop 2 жыл бұрын

Looks like a bunch of fun. 🤘

@austinisaperson6093 2 жыл бұрын

Oooh the wagon is back out!

@bobmanzi7712 2 жыл бұрын

great stuff guys thanks

@koolkody1247 2 жыл бұрын

love your vids thanks for posting

@theodoredugranrut8201 2 жыл бұрын

Cool video guys, test and tune days are ups, downs and alot of head scratching, congrats on shop improvements. Central California Watching

@bradyoung6663 2 жыл бұрын

I have a suggestion that will help you guys save time and frustration in the long run. Take some angle iron and pipe, and make a bead breaker. Then take about 3 feet of 1/4" x 1" steel bar, grind and polish it down into some real tire irons. It should only take a day, and you may get a video out of it.

@garygaarderjr9733 2 жыл бұрын

I used to break beads on car tires using a old bumper jack and let the weight of the car break the bead.

@bashr52 2 жыл бұрын

I'm glad to see you're doing another door on the back side. I mentioned in your first shop build video you may want to consider it since anything you put in that back corner or on the 4 post lift would be trapped. Looking good!

@jacobbreazeale1816 2 жыл бұрын

I'm loving the racing content recently!

@kristianellis1858 2 жыл бұрын

Awesome video guys.

@big420ccboiz9 2 жыл бұрын

Love this video I'm gonna put a bigger tire to get more topend Awesome Job!!! I would love to see the upgrade on that 30 hp bike

@dukie1616 2 жыл бұрын

Great job gents! As usual😃

@Neo944turbo 2 жыл бұрын

Hell yeah brother !

@j.w.3345 2 жыл бұрын

Definitely not something you see every day! It will be cool to see it with the upgrades! As always, thanks guys! JW

@jarekmace1536 2 жыл бұрын

I agree about the tires, especially after using a bunch of improvised tools and a 10k forklift to punch the wheel out!

@ckfpv 2 жыл бұрын

Yall guys are awesome 💪💯💪

@talonted1990 2 жыл бұрын

Would have loved to see you guys run since you were at my local track.

@darrenmobley6000 2 жыл бұрын

That pickem up truck is looking good. I remember when it was just a the cab you were doing body work on. It’s come a long way

@shawnjones2772 2 жыл бұрын

That's awesome!

@BuddyVanDoodle86 2 жыл бұрын

Definitely my favourite build

@vrmn11 2 жыл бұрын

Im with you Jon with the tire.

@weldeddaydreams 2 жыл бұрын

Love it. You could run 3 hot 212s with 3 torque converters fairly easily, use one looooong 420 or 428 chain with some cleverly placed idler sprockets to get the wrap you need on the driven sprockets. Kind of like what you did on the reverse engine fat tyre bike. Hell, you could probably mount the idlers to the TAV backing plates. Then that thing would really haul.

@dirkpitt5468 2 жыл бұрын

I did this, but jetted the carb at the same time. No starvation probs, but no drag strip either. Love you guys. I have been watching Red Beard then you for a few tears now. Where can I bring my mini? I want to play. I’m in Va.

@robertjean659 2 жыл бұрын

Thought you guys would have a bead breaker. Fun stuff again. 🇦🇺🇦🇺👍👍

@p1nelord 2 жыл бұрын

Truly an art piece

@rimshot223 2 жыл бұрын

Perhaps some springs with a higher rpm engagement for the clutches would help you get off the line harder and faster. Great build guys. Looking forward to more of this bike.

@jameswade2002 Жыл бұрын

This needs to come back and get a drag slick. Some Elmer Trett stuff right there!

@brianmccann666 2 жыл бұрын

Issac ... Got an Idea for You three. • 3 Bicycles. One for each of you guys. • Strap Stock 2-Stroke Engines to the bikes. • Race your own bikes around the Track. See who wins. Now after that, make mods to the engines. You guys can easily make 6+ video of this. 3 video each building your stock engine bicycles at least. 2-3 videos dialing in your stock performance before racing on the c&c track. 1-3 actually racing alone and all three bikes at once. Then the mid vids... Countless videos as you upgrade 49cc to 79cc to 100+cc 2stroke engines. Air filters, carbs, fuel tanks, handle bars, rims/wheels, tires, etc... Then eventually 2stroke Bicycles vs 4stroke bicycles... Etc...

@donaldcope4982 2 жыл бұрын

We can get in the 9"s!... Dig that!

@garymorel1882 2 жыл бұрын

Three torque kits and taller gears next👍 Also just something I’ve done for years is when have carb issues I’ve added low grade race fuel to the gas not a lot but about half a cup per gallon and I’ve never burnt a valve and sometimes it helps if it’s just a little trash or weak gas Which I have bought weak gas straight from the pump before to find out later But anyway great episode thxs for what you guys do👍

@StansWorld 2 жыл бұрын

I like johns way of thinking when it come to changing Tires I agree

@TsunauticusIV 2 жыл бұрын

Turning into one of those channels where you can automatically skip to the very middle of the video because that’s generally where the main advertised content actually starts. 😂

@noahpaulette1490 2 жыл бұрын

Now this is what we have all been waiting for

@boblalonde8661 2 жыл бұрын

I'm sure somebody already mentioned it but you can break beads pretty easy with a farm jack and a truck bumper. I've done it a bunch of times over the years.

@ChiefRickyRC 2 жыл бұрын

Props to pulling the govenors and sitting above three grenades 🏁🥳

@paddlebutt 2 жыл бұрын

Looks like a blast! Try taking the 3 air filters off on the strip.

@tc.hammerham989 2 жыл бұрын

I been waiting to see this baby rip

@tristanmcnabb2741 2 жыл бұрын

Wooohooo 😁👌👍🌟 allsome stuff guys 🎉

@bobsbasementhotrains3020 2 жыл бұрын

Great video . I would like to see the TOT Rod at the drag strip.

@BigKrisMorris 2 жыл бұрын

I’d love to see the rail with 4 or 6 engines in it 2 rows of 2 or 3 it would be amazing I love that thing haha

@handyhippie6548 2 жыл бұрын

i've got a 41 chain on my 5hp briggs minicycle conversion. running all of that power through a 35 chain is crazy. it gonna break, it's only a question of when.

@DJakaMitaka Жыл бұрын

It's about time you guys got a tire machine, it's like $50 at harbor freight so for a bit more in sure you could get something mint

@ottersdangerden 2 жыл бұрын

You dont always have a bunch of oopsies in your editing but when you do wooo wee XD decent video anyhow!

@derekbturtlehuntin789 2 жыл бұрын

Love the vids guys, keep it up. I see that sears roper back there. Hope thats in a vid soon. I have two I've been restoring. I need a sissy bar for one of them, if you could point me in the right direction that would be awesome.

@GooseGosselin 2 жыл бұрын

Wondering if you've ever messed with Gopro telemetry overlays? Would be kinda sweet having a real time speedometer reading on video. You guys keep getting better and better, thank you!

@MrDeticus 2 жыл бұрын

How in the world do you have that awesome shop, all the cool tools, welders, plasma table, lifts, etc... and not have a $100 tire changer from harbor freight!?

@garykeenan3724 2 жыл бұрын

Just make a small tire bead breaker get some medium style tire irons for motorcycles! The bead breaker has saved me lots of time n’ less headaches! 👍✌️You all would be fun hangin out with ridin n’ building some badass rides!!! 👍✌️

@jackelope1776 2 жыл бұрын

There is a technique I used on my motorcycle tires using a c-clamp to break the bead loose. Still takes longer and more headache than taking them to a shop equipped with proper equipment, but does make it a lot easier than the technique that Ike used.

@bryangarton2313 2 жыл бұрын

very good show😎😎

@cheeseinmypocketsvelveeta2195 2 жыл бұрын

So many combinations of possibilities to try and get that sucker to go faster quicker. So much more interesting than another video of a supra destroying the strip, can't wait to see.

@dynamite6507 2 жыл бұрын

You should really brings everything to the track and see what they run. Be a great series

@Michaelcarlgadwah 2 жыл бұрын

Sweet bike man

@valdezventures5501 2 жыл бұрын

For like 60 to 80 bucks harbor freight sells a small tire changer that is super easy to use. I love having it around. Thinking about buying the big one too.