We TRANSFORMED This $800 Dodge Truck On The CHEAP!
Рет қаралды 316,739
Күн бұрынUse my link ridge.com/staytuned to get up to 30% off through December 20th and enter free for a chance to win a Ridge bundle worth $4,000. Video Sponsored by Ridge.
Tony Angelo scooped up this 1980 D150 that has been used to haul trash and scrap since 2012 a couple months ago for $800 bucks! After gifting it to Michael Barbalinardo, they decided to get this truck transformed into a great little run around street machine with the other Stay Tuned guys! For a grand total of 2400 bucks, this truck runs, stops turns and looks wicked cool!
---------------------------------------------------------------
CHAPTERS:
0:00 - Intro
3:25 - Clutch Swap
17:51 - Carb Rebuild
20:54 - Lowering Setup
38:02 - First Fire Up!
42:42 - Hot Rod Mods
46:03 - Brake Job
47:50 - First Drive!
50:36 - Smooth Rear Bumper
57:15 - Out in the Streets!
75:41 - Clean ‘Er Up
----------------------------------------------------------------
GRAB THE NEW STAY TUNED SHIRTS AND GEAR: tangeloracing.myshopify.com/
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Zach: / therealslimzimmy
Mike Kunz: / mikeslim
Tunes by The Subtastics: subtastics.bandcamp.com/
----------------------------------------------------------------
MY PARTNERS:
Holley: www.holley.com/
Summit Racing: www.summitracing.com/
Dorman Products: www.dormanproducts.com/
Wirecare: www.wirecare.com/
Boxo: www.boxousa.com/
Mickey Thompson: www.mickeythompsontires.com/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!
@StayTunedTA 6 ай бұрын
Use my link ridge.com/staytuned to get up to 30% off through December 20th and enter free for a chance to win a Ridge bundle worth $4,000. Video Sponsored by Ridge.
@layzboy2545 6 ай бұрын
Please don’t let Tony lose the Shop!🤣🤣🤣
@ericlee8231 6 ай бұрын
Junkyard digs, pole barn garage keep it pretty low buck as well as old vice grip garage a few others too
@user-rn6yc1vh4q 6 ай бұрын
Why do all of the guys on car videos channels , turn in to comedians and take away from the content of the video . seen fake to over reacting to cutting a bolt , screwing around will get someone hurt .
@benjaminallanson5404 6 ай бұрын
Are we restocking medium crew neck sweatshirts 👀
@zakkordal2346 6 ай бұрын
So many car channels focus on rare cars or expensive cars that I have little to no chance of ever owning. I love the videos about vehicles i might actually be able to have as a project of my own one day
@StayTunedTA 6 ай бұрын
Awesome! We keep it pretty down and dirty here!
@focused313 6 ай бұрын
There's room for all of the channels and I appreciate them, but I'm with you, save a few checks and have fun.
@alexcorona 6 ай бұрын
Why do you even watch those channels to begin with?
@deanmullins695 6 ай бұрын
@StayTunedTA 💯% keep up the amazing work and content
@robwigglezz944 6 ай бұрын
@@alexcoronaI occasionally like seeing shiny new parts being put on. I'm sick of the will it run videos with basic carbureted cars.
@KCampen1986 6 ай бұрын
These odd ball cheap projects are what so many guys need right now for motivation. Too many 6 figure builds on social media right now. Get it rolling then worry about getting it right.
@StayTunedTA 6 ай бұрын
Agreed! So many smiles already cruising this thing around, its awesome! and he can upgrade from here.
@KCampen1986 6 ай бұрын
@@StayTunedTA I had a 64 m100 long bed removed a bunch of leafs from it laid it on 17” ram steel wheels a lot like the police wheels 300 6 4 speed with 3.00 gears. Unfortunately I had to sell it before I got to drive it but it was such a cool truck and I will build another one when my kids are older.
@joeala762 6 ай бұрын
The stance and the wheels!!! Perfecto!!!
@Khorsathedark 6 ай бұрын
This has been one of my favorite builds so far. There is nothing here that I can't do or can't afford. That means a lot to me. Keep up the great work guys!
@latrinedveen 6 ай бұрын
The soon to be lost art of carburetor setup and rebuilding. It is about time Barb dusted off this Dodge, perfect shop truck. Also I love watching this channel grow! Whoever is editing the videos, you are doing great.
@ChrisHessert 6 ай бұрын
You guys are my current favorite auto channel. Like the variety of projects, footage, background music, conversation and jokes, and the pace. Great stuff - thank you!
@Ecosse57 6 ай бұрын
yeah they nailed it.
@debbiebermudez5890 6 ай бұрын
Mr. B. Here ! 👀😎👍. Finally you guys are showing those who think that spending a lot of money to build a killer truck is not realistic ! What has been done is killer ! 🍕🍕🍺👍👍👍👍
@StayTunedTA 6 ай бұрын
Right? Just get it back and running down the road!
@JoseRodriguez-rl3ch 6 ай бұрын
Next project: a turbo and holley sniper for the slant six. Please don’t swap the engine.
@Killerconceptz 6 ай бұрын
So awesome to see friends build a truck on the cheap and celebrate like brothers! Great work she's a looker!
@crycheck3585 6 ай бұрын
8:27 re: Z-bar linkage. An external hydraulic system has advantages (especially self adjusting), but a mechanical Z-bar setup can be REALLY nice if you replace the cheap factory wear-prone pivots with heim joints. My CJ7 was a mess to shift before the simple heim joint swap and now it's by far my favorite clutch to use. It feels like a bolt action rifle. My 5.0 MGB is getting a Nissan truck hydraulic cylinder on the T5 because joining the factory master via 3an braided is easy peasy. The builds on this channel are some of the best out there.
@StayTunedTA 6 ай бұрын
Oh, that does sound cool and not too bad to do, would be cool. I like a direct linkage. Appreciate the support!
@toddmccarter45 6 ай бұрын
What did you use for a slave cyl?
@KMopar07 5 ай бұрын
the trick on my 77 Nova 350 4spd. is to only use the clutch from a dead stop. and upshift w/o the clutch! work suprisingly well for the old saginaw M21! ive never used the clutch to slow down w/ my old car i let it in neutral and use the brake. since they are cheaper and easier to replace! 😁
@paulhardman2515 6 ай бұрын
Need to build the slant 6 with a cam, four barrel + intake, port the head and headers! Clifford performance has all the goodies!
@scottdoubleyou563 6 ай бұрын
Offenhauser makes good stuff for the 225 Slant 6 as well
@bigdaisy19k 6 ай бұрын
Oh look it's the best time of the week... Barb is gonna love it. I smell slant six upgrades incomming
@StayTunedTA 6 ай бұрын
Yeah, he's pumped! It turns out great! thanks for watching!
@ssdeuce 6 ай бұрын
Thanks for showing the 72-93 Dodge trucks some love. This could have easily been another C10 revival 🤦♂️ Also thanks for the detail you shown on how to flip the rear and lower the front. Lots of questions get asked on the group pages about this and from now on I will reference this video
@DrDangerDave 6 ай бұрын
WHOOO HOOO STAY TUNED!!! LEANING TOWER OF POWER!!
@StayTunedTA 6 ай бұрын
Let's go! 6 in a row, and away we go!
@stevenweikart2567 6 ай бұрын
"Dirty White Boy" Perfect classic rock name for this rig. LOL
@xxBlazinBobxx 6 ай бұрын
Grew up with a 1974 two-tone (yellow-beige/cream) Dodge D200 that my Dad flew to Detroit for in order to get the exact specs he wanted. Had a 440 ci V8 engine in it! Dad intended to put a camper on, but it ended up being his work truck most of his life. Had some great memories driving in that thing!
@oslongste1 6 ай бұрын
When Tony called him chip foose, I lost it lol. By far the funniest episode ever.
@josephkelly4893 6 ай бұрын
Six in a row, ready to tow!! Great vid again gents. Didn’t know Barb did the thumbnails, the boy has skills, they always look great lately
@jodyandmichelle1 6 ай бұрын
You guys should've been building hot rods in the early 60's. The creativity and talent is through the roof! That sub $1000 truck is worth daily driving now!!
@timjohn2810 6 ай бұрын
Absolutely fantastic build, this is what it is all about. What a team, great effort. Thank you for sharing with us.
@exlimey1417 6 ай бұрын
I watched too many Emergency! reruns as a kid. Always wanted one of those Dodge trucks. Had a 91 S-10, loved the Sike-clone too. You're really hitting them out of the park right now. Plus we don't have to wait months for a 10 part series. Bought a hat and shirt a few months ago. Should've waited so I could grab a Sike-clonse shirt.
@jonathanstermer2665 6 ай бұрын
Id love to work in a place like this. Just helping out on super crazy, nasty hot rods all day with the boys. All the builds lately have been killer, shout out NEPA!
@robsvideos13 6 ай бұрын
you need to find a "super six" two barrel carb and intake!
@StayTunedTA 6 ай бұрын
I'm on the hunt now! and maybe a t3 to cram boost in to it!
@garyslentzii2796 6 ай бұрын
That confetti cannon was hilarious! The look on Tony's face was priceless 🎉
@bobcox2580 6 ай бұрын
What a sweet truck. I'm happy for you Barb. I really like that you guys are having so much fun in the shop and the celebration after.😂
@ericcrawford326 6 ай бұрын
Man that brings back memories. Leaning tower of power!
@StayTunedTA 6 ай бұрын
Yeah, same here! We were always in something with a 225 in High School.
@theglitch99 6 ай бұрын
The stance of that truck just put it on a whole new level of bad ass! Grandpas are loosing thier minds everywhere!😂😂dag nabit! 35:20
@nothanks9050 6 ай бұрын
I was so outraged the onion fell right off my belt!
@Ecosse57 6 ай бұрын
i love videos like this. awesome channel and crew. as a mopar fan this pushed all the right buttons.
@ronaldhellengreen7063 6 ай бұрын
OH HELL YA! It never ceases to amaze me how much the stance and tires, and wheels make! Really a good looking truck! PEACE ✌️
@user-ty4hc2xd3e 6 ай бұрын
We need some of the Angelo's garage hoodies there cool !!!!!!!!!
@StayTunedTA 6 ай бұрын
Maybe we can bring that back again, crew necks for now!
@tristenanderson8356 6 ай бұрын
It’s super sick to see a slant six on one of my favorite channels. Always love seeing them and old 300 fords
@qmopar 6 ай бұрын
That D150 rocks!! You truly are a beacon of creativity!😂😂 Stay Tuned rules!! 👍🏁🔥
@RyanFannon-fy1yf 6 ай бұрын
You’re one of my favorite shows boys keep rocking 🤘🤘🤘Let’s Goooo
@StayTunedTA 6 ай бұрын
Rock on! Appreciate you!
@assaultlick2169 6 ай бұрын
Down and dirty! Confetti pop was the icing on the cake. Great little attainable type of build. Like a lot of guys in the comment section this is quickly becoming one of my favorite channels. So many fun builds going on. Can't wait to see what's next, guess I just better ... STAY ⚡️ TUNED
@shazbotnanu7037 6 ай бұрын
Hot rod that slant 6! Torque Storm has a supercharger for it and AussieSpeed has tons of other parts. Way cooler then an engine swap
@tonypozzini4724 6 ай бұрын
From one Pennsylvanian to another, Great video Tony! Love the channel, you and the crew look like you really enjoy working together. Ordered the new sweatshirt. I also have the Angelo's Gym and the Firebird 3/4 sleeve shirt.
@layzboy2545 6 ай бұрын
HellYeah PA Boys!!!
@StayTunedTA 6 ай бұрын
Thanks! Appreciate the support! We had a blast this week, a ton of laughs and this truck turned out killer.
@Ajones0235 6 ай бұрын
As another PA dude, this video was great. Love to see old junk brought back to the streets. Killer project man
@chadriddle3517 6 ай бұрын
What a creative spectacle here ! Bravo STAY TUNED team
@StayTunedTA 6 ай бұрын
Thanks! It was a super fun shoot!
@kennynelson2269 6 ай бұрын
The truck turned out awesome. . Freaking love the energy in the stay tuned shop.. you guys kill it every time and tony you're a freaking Rockstar..
@russelltrupia4479 6 ай бұрын
Awesome video great crew and great content Tony, and as usual the pizza looked good.👍👍
@StayTunedTA 6 ай бұрын
Thanks 👍 Appreciate all the support!
@slowdaze 6 ай бұрын
I know this isn’t in the plans, but would love to see you build up that leaning tower of power. Cam and turbo!
@StayTunedTA 6 ай бұрын
AGREED! He's got a 5.9 magnum but maybe a few LBS of boost could wake this thing up for awhile!
@christronvold6045 6 ай бұрын
Thats what i was hoping. I am a mopar guy and ive heard a slant 6 can b built up and b wicked. Unfortunately ive never seen it. I have dreams of doing it myself in some oddball mopar some day
@waynerohde1036 6 ай бұрын
It's a good motor. Here's a slant build! kzfaq.info/get/bejne/f52UlKqK2s-oZok.htmlsi=LZN4Batv_NUId7Hp
@corystansbury 6 ай бұрын
Hemi head swap from down unduh?
@mikewhite3123 5 ай бұрын
Engine masters did one,worked great @@christronvold6045
@3wbasie 6 ай бұрын
I love these dudes god damn
@StayTunedTA 6 ай бұрын
HA thanks! We love ya right back!
@garyw4211 6 ай бұрын
I just love seeing you guys have fun. That's the best part for me. Keep the down and Dirty builds coming boys!
@billchryssanthopoulos2119 6 ай бұрын
Awesome content as usual Tony and crew!
@StayTunedTA 6 ай бұрын
Much appreciated!
@Mtb9r 6 ай бұрын
Luv the early dodge. Currently building a 1957 dodge town wagon. 1991 front vette clip and a 4link coil over rear. Rock On.
@rangeraficionado87 6 ай бұрын
I'd like to see the guys put an aftermarket cam in this little six cylinder and maybe an aftermarket intake manifold and headers if they exist. Wring that little 6 banger out!
@davidvaughn7778 6 ай бұрын
You can most definitely get a 4 barrel intake and headers for the slant 6. Dual exhaust etc. They sound pretty decent if I remember correctly.
@timothykeith1367 2 ай бұрын
A truck needs torque, maybe an RV camshaft
@lonewanderer3603 6 ай бұрын
All I want for Christmas is Stay Tuned shop bibs.
@StayTunedTA 6 ай бұрын
OK! We're working on it!
@E_JIM3N3Z11b 6 ай бұрын
Building one rocket after another! 🔥🛻🚀💪🏽🤘🏽✌🏾
@StayTunedTA 6 ай бұрын
might not be a rocket, but we will get there!
@sawdustandcigarettes 6 ай бұрын
Leaning tower of power!!
@StayTunedTA 6 ай бұрын
225, stays alive!
@sawdustandcigarettes 6 ай бұрын
@StayTunedTA My bud had 71 Demon, this was in 83, we put a 4 bbl intake, header and Cam in it with posi and ratchet shifter and embarrassed a bunch of guys. They'd ask to pop the hood, and we were, no you don't want to see this. Lol
@user-ns4vg9vd3w 6 ай бұрын
Super cool little build, Mr Barb.
@StayTunedTA 6 ай бұрын
Agreed!
@layzboy2545 6 ай бұрын
HellYeah Boys. Wife ordered me a Stay Tuned hat and Tshirt for Christmas. Just arrived today. Beer and a Slice Time. Ready to Stay Tuned!!! 🤘🤘🔥
@StayTunedTA 6 ай бұрын
Awesome! Let's go bud! Your wife sounds like a keeper! Merry Christmas!~
@layzboy2545 6 ай бұрын
@@StayTunedTAYou made it a merry Christmas with that quick shipping. Ha ha ha. She’s definitely a keeper 🤣🤣🤣Merry Christmas to you and your fam too
@BarbalinardoInnovations 6 ай бұрын
Hell yea, thanks for watching!
@layzboy2545 6 ай бұрын
@@BarbalinardoInnovations Barb Rules! Merry Christmas to you and your fam. 🤘🤘
@Bob-Whiting 6 ай бұрын
Awesome transformation guys! You made me smile, you made me laugh. Right when I needed it most, so thanks & Merry Christmas!
@tomzach7030 6 ай бұрын
You guys are doing an awsome job creating some great and interesting content. Keep it up! its refreshing watching actual car guys work on stuff.
@kumakaroshi117 5 ай бұрын
Nothing beats a buddy Willing not only to buy you a project but help you work on it.
@kens8903 6 ай бұрын
Thank you for being a builder for normal people. Love your channel. Wish more tubers would go this route.
@davedelarosa319 6 ай бұрын
Haven't watched yet, but these old D series Mopars are near to my heart.
@StayTunedTA 6 ай бұрын
They are just such a cool shape! So underrated!
@davedelarosa319 6 ай бұрын
@@StayTunedTA I had a '78 two tone longbed 4spd 318 back in the mid 90's. It was questionable at best, but nothing I've had since scratched that farm truck itch the same way.
@Reeltime516 6 ай бұрын
You guy’s are killing it. A bunch of buddies wrenching on rusty stuff. Great vibes
@npickart 6 ай бұрын
This is what the car community needs. Real dudes, working on real cars(or trucks) that arent show pieces. They're rusty and neglected. And it doesnt take several thousand dollars to have fun.
@PatandDoopypoopy 6 ай бұрын
Yet again - relatable stuff. It's why I'm here. Thanks guys and keep the shop!! Health and Wellness for you and yours.
@DustinDriver 6 ай бұрын
It looks so great! What an awesome truck!
@westschleife 6 ай бұрын
Just want to say it Tony and crew, loving the channel. It's super cool to see you guys be a team.
@OpenRoader 6 ай бұрын
That thing came out KILLER!
@danrossi6554 6 ай бұрын
love it guys! so glad to see someone actually excited about a slant 6 80 dodge!!!!
@justtinkering6054 6 ай бұрын
This is one of my favorite builds that you guys have done. Simple and low buck. Get it back on the road and enjoy it. Great video!
@alansaxton5683 6 ай бұрын
Gotta love how much fun you guys have doing this.
@pinchus34 6 ай бұрын
Absolutely loving the East Coast content. Crushing it!
@davidmcnett2602 6 ай бұрын
Tony and the guys are now responsible for driving up prices on D100 and D150 short beds. Lol. Awesome video as usual!!
@brianeastateastindustries9336 4 ай бұрын
I agree with the previous comments. Beaters with heaters is what most of us can afford to build and seeing channels actually do that in a fairly reasonable budget is absolutely what we all need right now.
@justinl2458 6 ай бұрын
Tony you have the best channel - good group of guys, “normal” cars and the killer attitude. Keep bringing the heat!
@stevencararini4917 6 ай бұрын
“You should’ve paid more so they fit through the control arm”. 😂
@davidgough1161 6 ай бұрын
Much love to you guys, doing cool stuff without a lot of money!!
@20b3rotordream 6 ай бұрын
That’s awesome that you value your employees that much to help them out while profiting. Keep it up guys I do enjoy your channel
@for-sure-friend 6 ай бұрын
i love this show. you guys are the best. everyone is nice and authentic, nothing is fake
@Weretarantula5 6 ай бұрын
Yessssss! Friday ST party time :D new truck looks like fun!
@StayTunedTA 6 ай бұрын
It's awesome! Thanks for watching!
@Midjourney_Magic 6 ай бұрын
Awesome guys. Love everything you are doing, grats on 200k and keep pushing!
@ipoopmuffins 6 ай бұрын
i hope the confetti popper christening becomes a staple in all builds (even other channels too)
@StayTunedTA 6 ай бұрын
HAHAH yeah it was great. Maybe next time not while we are driving.
@thebassplaya34 6 ай бұрын
Come on guys! Strap a turbo on that thing!
@quig89GMC 6 ай бұрын
Tony you and the guys did a great job. The stance is just plain killa and of course the hubcaps. Can't wait to see your next video.
@anthonyferretti28 5 ай бұрын
You should name the truck Elbow Grease. Great job as usual guys!
@jedwards100able 3 ай бұрын
I learned one thing doing ball joints in D100. Dodge with the screw in ball joints after you tighten them down bring the mig welder over & Tach each ball joint in all the way around. Because most likely the threads aren't able to hold them anymore. First one i did 2 days later both uppers completely popped out. I tached each ball joint on each side of every point on the hex with 1/8" long bead. Haven't had any issues since.
@cleanmachine08 6 ай бұрын
Top shelf banter and a great relatable project. That truck is hell cool.
@montanaharkin 6 ай бұрын
The content we deserve! Awesome work!
@E.T.GARAGE 6 ай бұрын
Another great video👍👍👍 Slant Six Pickup
@StayTunedTA 6 ай бұрын
Glad you enjoyed it! thanks for watching!
@GkPhotographic 6 ай бұрын
hey from Dublin Ireland , Grand job lads
@StayTunedTA 6 ай бұрын
Thanks! Appreciate ya!
@grantsaunders 6 ай бұрын
Awesome transformation! Happy for Barb. That stance 🤌
@blueduster74 6 ай бұрын
Picked up an 85 D150, a few dings but no rust. $1700, slant six and 4spd OD. The block is cracked, he had straight water in it when it got to single digits last year. I’m swapping in a 318 magnum with a carb soon. Next year it’ll get a 5.7/8spd. It’ll get the van LCA swap and some drop hangers. The 8.25 will have to get swapped for a 9.25 when the Hemi goes in. This will be my son’s truck eventually. I’m hunting for a 72-80.
@joshr188 6 ай бұрын
Great episode! Its cool to see that not everything has to be big HP to have fun. Keep it up fellas!
@kylegeldmaker 5 ай бұрын
love the look of this machine, as a guy would say "nice going to town rig".
@sirrevalot2543 6 ай бұрын
Awesome video guys and the truck turned out very cool. Hope there will be more of this truck on the channel. Thanks for good content on the tube.
@SSThomas84 6 ай бұрын
GREAT EPISODE FELLAS! Finally got around to watching. Now I know it can be done on the cheap. Love that stance!!! Low N' Slow
@brianlafollette7530 6 ай бұрын
Manual gears even with less power is still great fun 😀 ! ! !
@Str8sixfan 5 ай бұрын
Definitely love everything about this truck! What a fun build.
@Linkster-uu1ej 6 ай бұрын
That was Sweet! From an Angelo's Garage Gym workout to burning rubber, great Episode Guys, Keep 'Em Coming!!
@69gpavv 6 ай бұрын
Love this channel look forward to it every Saturday lunch time afterwork. Much love from NZ
@troybee7815 6 ай бұрын
I bought the EXACT same truck brand new and put 235K on it before it finally shit the bed. I really wanted to drop another motor in it, but I donated it to a high school auto shop program instead. I never regretted my decision... until now. So... thanks for that. I'm out on the prowl for another one, though! Keep rippin', guys!
@lesrushworth4116 6 ай бұрын
Brings back memories of my 76 d100 I restored was a 318 auto, hemi orange from the factory great truck, thanks for this channel!
@rexdouglas4874 6 ай бұрын
Great looking Dodge! Stance is perfect!
@billwallace9734 6 ай бұрын
Man! That’s the truck I’ve been looking for too and you got it for 800 bucks! Awesome! What a concept an affordable auto channel, I like it!
@musclecarcamaroman9092 6 ай бұрын
What a cool transformation! That thing turned out killer👌
@bcole505 6 ай бұрын
That's a sweet little truck . Glad you're getting it back on the road and using it.
@miguelpagansr6128 6 ай бұрын
It's an awesome transformation, but I wouldn't have cut the front coils due to the spring pockets in the control arms would bring it down a bit.
@lendruken3763 6 ай бұрын
Keep that truck stuff coming! Love it!
@robertbelote5273 6 ай бұрын
That should definitely be a shirt especially for us here in the Northeast, "if it's on the car it's patina if it's on the floor its rust". Chefs kiss fur sure.
Stay Tuned
Рет қаралды 114 М.
Poly Holy Yow Spanish
Рет қаралды 25 МЛН
MotorTrend Channel
Рет қаралды 658 М.
Stay Tuned
Рет қаралды 527 М.
Dennis Collins
Рет қаралды 337 М.
Hagerty
Рет қаралды 407 М.
Честнов Анатолий
Рет қаралды 8 МЛН
Ximei Jo
Рет қаралды 23 МЛН