We tried the LUNA BEAN HAND CASTING KIT!!

  Рет қаралды 34,647

Klari & Colin

Klari & Colin

4 жыл бұрын

Hey Guys! Welcome back to the channel. Today we are attempting to make our own personal hand mold with the main focus being on the engagement ring. We want to make one of these before and after we get married! Hopefully this works!
The Luna Bean Hand Mold we used can be found here:
www.amazon.com/Luna-Bean-KEEP...
SUBSCRIBE: kzfaq.info/love/hW3...
CAMERA: Canon Powershot G7X Mark ii

Пікірлер: 46
@jw6180
@jw6180 2 жыл бұрын
Thank you for sharing that it showed the veins! That’s the detail we’re looking for!
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
Absolutely! Hopefully yours comes out even better 😌
@lj6278
@lj6278 2 жыл бұрын
1:14 getting a second taste of breakfast 😆
@claudiah7653
@claudiah7653 4 жыл бұрын
so cool
@KlariColinVlogs
@KlariColinVlogs 4 жыл бұрын
Claudia H we highly suggest you do it too!
@chefgoldielocs
@chefgoldielocs 3 жыл бұрын
I just got this kit in today. Thanks for the video
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
Great! Hope your cast comes out even better then ours did 😅
@ylindley
@ylindley 3 жыл бұрын
Thanks for the video!! I’m about to order this for our 11th anniversary. Hope ours turn out as well as yours did
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
We hope that your’s turns out even better! :)
@GoneAwayproductions
@GoneAwayproductions 3 жыл бұрын
Im thinking of ordering this for my girlfriend. Thanks for the review of the process
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
Absolutely! It was a blast doing it! Enjoy! :)
@wbg2jd
@wbg2jd Жыл бұрын
Luna bean is the best one by far
@NeoChrome_Gnome
@NeoChrome_Gnome 4 жыл бұрын
You guys are too cute. I miss seeing you guys lol
@KlariColinVlogs
@KlariColinVlogs 4 жыл бұрын
MikeyRiot100 awhhh thanks!
@maggieboone4897
@maggieboone4897 28 күн бұрын
Me family happy 😊😊😊😊
@kushweedfaded
@kushweedfaded 3 жыл бұрын
Kinda wild how KZfaq’s algorithm brought me here. Hope you guys are doin good 🤙🏽
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
Wow that’s so crazy how that works. We miss you. We are doing well! Hopefully you are doing good as well!
@tiffaniegarman2766
@tiffaniegarman2766 3 жыл бұрын
Did you make the 1st step cold 🥶 water?
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
I think it was all lukewarm water haha!
@eizhowa
@eizhowa 3 жыл бұрын
Dumb question - how do you get your hands out without ruining the mould?😅😅
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
eizhowa so we used baby oil and lathered our hands in it before we put our hands in the mold. That way it was easy for us to slip out without it sticking!
@lisacobb7525
@lisacobb7525 2 жыл бұрын
I have another question. I’ve done this a few times and they came out great. I did one for my mother yesterday and was planning to take it out this morning but I have a raging migraine. How long can I leave the casted hand in the mold before I “demold” it?
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
To be honest we just followed the instructions. I am not sure if you leave it in longer that it will mess things up. It might be worth calling their customer service and asking if you are concerned. I hope it comes out perfect! We might do another one soon! And hopefully you feel better :)
@lisacobb7525
@lisacobb7525 2 жыл бұрын
@@KlariColinVlogs Thanks
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
@@lisacobb7525 no problem wish we had better answers 😅
@lisacobb7525
@lisacobb7525 2 жыл бұрын
@@KlariColinVlogs FYI I got an answer from the company. They said it shouldn’t stay in the mold any longer than 48 hours. Any advise about mixing the casting powder? Once I do the mold I mix the casting powder with water. The directions saying to mix with a whisk. When I de-mold the hand is so full of little bubbles. It’s so hard to try to get those tiny bubbles off the cast. I fill up the mold a little and roll it around to fill all the nooks and crannies. I knock and tap the bubbles out. But it’s still full of tons of bubbles once I de-mold the hand.
@JohnnyBigEars11
@JohnnyBigEars11 3 жыл бұрын
Why didn't you guys follow the instructions lol 😂 you poured all step 1 mold in the bucket but where suppose to do half first, mix and than add the rest and save some for damages lol 😂
@KlariColinVlogs
@KlariColinVlogs 3 жыл бұрын
Honestly not sure what happened there 🤣
@eltonnoway7864
@eltonnoway7864 2 жыл бұрын
She only skimmed over the instructions and he didn't bother reading them at all. Surprised it turned out as well as it did.
@lisacobb7525
@lisacobb7525 2 жыл бұрын
I’m about to do this casting on my mother this weekend. She has long nails. The instructions say to put something under the nails so the mold nails won’t break off. They say clay but I’m afraid the clay will stick to the mold as she pulls her hand out. Any suggestions?
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
Honestly not sure. Klarissa didn’t have long nails at the time so we didn’t have to worry about that. Wish we could help more. Sorry 😞
@katied3849
@katied3849 2 жыл бұрын
I think just use some Vaseline before dipping honey. Save a lil bit of the powder so you can paint it on after for any imperfections
@lisacobb7525
@lisacobb7525 2 жыл бұрын
@@katied3849 Wouldn’t vaseline come off in the mold? Kind of make an oily spot the would mess up the casting liquid? Just don’t want to screw it up & waste it. Thanks
@katied3849
@katied3849 2 жыл бұрын
@@lisacobb7525 not too much Vaseline
@katied3849
@katied3849 2 жыл бұрын
My daughter and I just did precious impressions. I'm wearing fake nails. I'll let you know what happens
@snmfsquirrel87
@snmfsquirrel87 2 жыл бұрын
So what did you guys do wrong? How can I prevent it?
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
Some people have suggested using more lubricant on the hands. We only used baby oil. But I have seen others suggest using Vaseline. I’m honestly not sure what else went wrong but it missed our fingers a little bit. So maybe more stirring?
@snmfsquirrel87
@snmfsquirrel87 2 жыл бұрын
@@KlariColinVlogs Hey! We just did it and it turned out pretty good! I found out that you should hold your hands together very tight. If you have a loose grip and the fingers arent touching each others hands a lot, your finger will create its own hole making it hard for the liquid to travel up into it. So either the fingers need to be at the lowest point or hold on tight! Ours turned out good! Under my thumb is a little funky but its all good!
@KlariColinVlogs
@KlariColinVlogs 2 жыл бұрын
@@snmfsquirrel87 well that’s good to hear! I think we are going to try again at some point, and maybe paint it! Not sure yet. Maybe when we get married.
@colbycombs5292
@colbycombs5292 Жыл бұрын
Not helpful
Luna Bean Keepsake DIY Hand Casting Kit Tutorial | How To Hand Casting
11:46
Cat story: from hate to love! 😻 #cat #cute #kitten
00:40
Stocat
Рет қаралды 14 МЛН
NO NO NO YES! (50 MLN SUBSCRIBERS CHALLENGE!) #shorts
00:26
PANDA BOI
Рет қаралды 102 МЛН
ELE QUEBROU A TAÇA DE FUTEBOL
00:45
Matheus Kriwat
Рет қаралды 18 МЛН
How to Make a Mold (CHEAP)
15:37
Proko 3D
Рет қаралды 294 М.
DIY | Luna Bean | Infant Casting Kit
10:57
Sweet Mama Lifestyle
Рет қаралды 18 М.
Lifecasting Tutorial: Group Hand Cast With Genesis V Alginate
16:21
Brick In The Yard Mold Supply
Рет қаралды 99 М.
Luna Bean Keepsake Hands Casting Mold Video Tutorial Demonstration
11:47
Luna Bean Casting
Рет қаралды 37 М.
Family Hand Casting
4:07
Random Trades
Рет қаралды 106 М.
Make Your Own SILICONE MOLDS on a  BUDGET -TESTING 4 METHODS
11:50
Steve McDonald Arts and Crafts
Рет қаралды 851 М.
Cat story: from hate to love! 😻 #cat #cute #kitten
00:40
Stocat
Рет қаралды 14 МЛН