This is what I consider a Family success story...God loves You ALL.

Hunter can look you in the eye,but I bet he still respects you and is proud of your accomplishments.

My I didn't realise Hunter was so young I knew he is still at school but I assumed it was sixth form or whatever you call the pre university years in USA. I think it is great that he is so involved and rebuilding his own Bronco, it looks a beast. He obviously has a wonderful opportunity of working in C&C if he wants to when he finishes full time education. Good luck to him. he is very lucky having you for a father and that you teach him so much.

You guys have a blast working together and it’s great to see the in’s and out of these machines.

Did anyone else look away when the welder hit. Old habits…

on fuel tanks, my friend said he was on the course, and it was mentioned that the inventor of Barbie dolls also invented a lining for fuel cells that would let water collect into it and then run to a low spot. I'm not sure if the invention ever went anywhere, but it would be some handy.

That looks like it's going to make somebody a nice little loader. Great video

Easy Peasy to get it started when you know what you’re doing!

Awesome job guys my goodness brought that thing back to life.

Kevin is a man who enjoys his work. You guys are a hoot. I'd like to buy a couple of cases of beer & take y'all fishing. And I don't even fish. 😆

The 455's are the gifts that keep on taking.Kevin got plenty of experience on the first one ,so this one should be easy for him to make new again.Great video as usual Clint .Stay safe.

That is one tough little machine, you can hear it while you were driving it, I think I can, I know I can, Thanks Clint and the team for another educational video.

A helping hand is always welcome.

Clint I noticed in all your videos you are a hands on boss, pretty impressive to see that these days.

I remember standing behind the seat as a kid while my dad ran one of those !

Looking forward to see the under carriage rebuild!

53:23… the birth of any new ‘boy’ is a joy… but that was FRIGGIN brilliant

It's nothing like a old time flushing, moore & moore old school job, but still very good to see! Instead to change it, flush ìt, special if you have automatic gearbox privat car, every 12 000 Km! From Peter Eriksson Sweden Europe 😊😊😊!

The old girl sounds good. I been down that road of flushing transmissions out with diesel already.Had zero problems after doing it.The problem is a little water seems like a lot once it gets whipped up in the oil.Another great video can’t wait to see part 3.

Looked like it was gonna be spare parts at one stage there, great to see it up and running! Great work! 🇦🇺🍺🍺

Cool video Love the Bronco That's Great he is rebuilding it He will appreciate it more and take care of it if he knows every bolt Well done Clint on both projects

I knew we’d get a series out of this one!!

When this tractor leaves C&C, somebody's gonna have themselves a good machine.

Nice work guys. Always enjoy watching you guys dig in and find the problems with the equipment. Love watching you and Kevin and your boys working and having fun at the same time. Great video, Clinton, thanks for sharing!!

Dang, you guys are good, bringing equipment back from the dead/scrap pile. Great video

These videos remind me of buying used equipment and going through the trials and tribulations of working the gremlins out. Keep em coming.

I'm starting to believe that when you go out to look at equipment there's a voice that tells you "yeah, that'll make a good video." As always, I really enjoy your content.

Awesome video keep them coming love see old stuff brought back to life good job cant wait to see Kevin do his magic on a new paint job .

Great job guys. The old John Deere runs great

Putting that kind of work and money in it is that a good thing

Thanks for taking us along for these reveals. Hope you can at least break even on the "ran when parked"beauty Clinton. If not you can always claim 10 or 20 percent of Picasso's fountain patent.😁👍

Nice project! I will be waiting for the next video! Thanks!

tracks are doin the wave YIKES

Love the relationship with you and Kevin. Funny!

Great video y’all having fun while working Kevin and you are a blast

Omg! Those are some dandy tracks! But strong running machine clint!

Great video. I thought for sure you were going to throw a track. Great to see the boys hanging with you guys. Thanks for sharing. I look forward to part 2.

You guys are always fun & fascinating to watch you work through the diagnosis and rebuild process.

Well, you guys do not disappoint great video fun, and entertaining.

Loved watching that track flop around. She's a real beaut.

Absolutely love the video, projects are interesting to me. Looking forward to the rebuild rescue part 2. Kevin is so funny “ Gold Star hero”

‘When in doubt resort to violence’ - I like it - along with ‘if all else fails - read the instructions’ and “ if it won’t go don’t force it - hit it with a bigger hammer’ god I loved working on aircraft. Have a great day

Enjoying seeing this stuff ,,changing the blood is always essential and easy .

I love Kevin's Hillbilly waterfall. Lol God bless

I knew you and Kevin could handle whatever came up. Can’t wait to see the next one.

Love sound of the motor it runs .but alot of repaires .

You two crack me up...Kevin's my Hero!!

Really enjoy your content, between you boys and the dirt perfect bunch, it appears Indiana is filled up with some fine folks.

I like seeing this stuff. Interesting to see how things work. Great video and great people in the video. Thanks guys.

Kevin, I heard the ambulance and said the exact same thing… here in the south we call it the MEAT WAGON as well!!!

Great video Clinton love to see all that knowledge on those John Deere’s and get looking Bronco too

Kevin's T shirt 👕 is hilarious 😂. Freezer bags.....😂😂😂👍👌

Here is a trick I have used in the past to remove broken bolts. Before you weld on the nut, drill a 1/4 inch hole in the end of the broken bolt about 1/4 inch deep. Take an air hammer/air chisel with a round tapered punch on the end. Place the tip of the punch into the hole you drilled and hammer the piss out of it for at least 30 seconds. A lot of times that hammering action will break loose a lot of the rust in the threads. Weld on your nut and you will have a lot better rate of sucess.

Great job guys, nice Bronco walk around.

Great video. Really enjoying watching you bring junk back to life.

Thanks for sharing your time with us. Your sure know that equipment.

It helps to weld a washer on first.

That Bronco is awesome. Very cool.

You and Kevin do a great job together. Enjoy your banter and knowledge. Hope the dozer rebuilt pays off.

That thing can giddy up! They tracks are hilarious though. Lol

Clint you guys are the best !! Always remarkable results! Thank you so much for your videos !

I really enjoyed this video. The 455g looked pretty rough. I think you guys will definitely turn it into a work of art. 👍

Clint love your videos, try welding a heavy washer on a broken bolt first then a nut. When heating up a nut to remove a bolt, just heat up two sides opposite each other, much less likely to strip the threads, I found this the hard way. Keep up the great work.

You know your stuff, nice shop and rig.

These are fantastic videos. I’ve always had interest in heavy machinery but do not had the slightest clue as to working on them or doing general maintenance. Keep up the good work!

Another awesome video well done you keep on coming and I'll keep a watching

Looking forward to the next video. It's gonna be a HOOT.

Well, other than getting a little sea-sick watching that left track when you're going forward, that was a good video.

I am glad I found your channel. I am enjoying your older videos now.

Thanks for an exallant show. I love watching you guys rebuild a non running price of equipment to an excellent price of equipment. Great entertainment. Thanks guys.

Oh yeah,! Good vide as Logger Wade would say! Enjoyed it! ☆

Kevin and Clinton you guys are always having a beast. Kevin you need to go forward with your yard art . Hunter what's up with bronco. Plan B. Flame wrench loosen everything.

Good job guys getting the 455 to run the tracks looked like a wave at the ocean when you took off forward. I’m not a ford guy but that bronco is a sweet truck especially with the one ton axles and the Diesel engine, Hunters got a chick magnet when he turns 16. Great job!

I use starting fluid on the bees.

Nice bronco in the background at the beginning and very cool 4x4 f-superduty for sale. Popped up on marketplace close to me. Keep the great videos coming!

I changed a lot of O-rings to Quad-rings, especially on flange fittings and flat face fittings. They provide a much better seal, especially on large hydraulic flanges on 4 and 6 inch pipe.

Great Video! Thanks for sharing it with us.

Hunter's got a nice bronco. To many milkshakes in that dozer 🤣, nice work 👍.

The old machine did seem fairly strong. With it's arteries cleaned out. I'm sure it'll be like new before long.

Really excited to see the under carriage rebuild that's awesome I've never seen track press work done before but have always been interested in seeing how all that works. Great video keep'em coming!!!!

Probably burnt out the starter or damaged the cables trying to get it to run with that blocked fuel line. Nice work getting it running!

Beats a full blown rebuild!

I really enjoy your videos keep them coming

Great video Clint just a big can of problems on this one

You guys make hard work look like fun or is it, you make fun of hard work!!! ;)

46:41 Kevin gets all the good jobs!

That's a good lookin tractor Clinton. I'd love to add it to my fleet ; don't need it, but I want it.

the gloop was rolling out👍👍👍👍👍👍👍👍

Greetings from Central NH Lakes Region - You have the sow's ear at this point, looking forward to the ultimate silk purse!

The people that come after Kevin don't have sirens. At least I don't think animal control doesn't have sirens. Kevin says all you have to do is dodge them. Lol God bless

Another great video Keep them coming !!!

37.30 thats water in the fluid! From Peter Eriksson Sweden Europe! 😊😊😊

Damn, most of that was just your neglect but that chocolate milkshake looks damn good. I’m surprised that Machine even moved with his much smegma plugged up around that suction filter.

Kevin, glad you like the taste of oil and grease. You sure do eat your fair share. At least you are well lubricated at the throne!

Another Awesome one. Thanks Guys.

I just got on the Tube, good to see you Fella’s

Sweet Bronco Hunter. God bless

Nice video. At least this one shouldn’t cost as much as the last one. Maybe the original starter is still good.

Love Kevin's shirt that is the truth

What a hot mess that was ! you guys are awesome !