Weathering Wash : Building The HobbyBoss TBF-1C Avenger 1/48 Scale : Episode.14

Рет қаралды 29,917

2 жыл бұрын

Website for more content: www.genessis-models.co.uk/
Modeling Store for kits & tools: www.genessis-models.co.uk/shop/
Sub Channel: / @genessismodelsextra
------------------------------
To be able to view all the videos from step by step, Tutorial, Reviews and much more please visit our website here : www.genessis-models.co.uk
---------------------------
Genessis models is for anyone interested in modelling from beginners to advanced modellers, for those with an occasional interest to the over-the-top enthusiast!! The Genessis Models website is a great way to socialise and interact with fellow modellers.
Here you can pick up tips, tricks, and a range of techniques to build your next masterpiece as well as share with others what you have learnt along the way.
You can upload your own pictures of your work on the Discord and receive comments from other members on our Discord channel, it does not matter what area of modelling you are in all are welcome.
-----------------------------
Facebook: / 236019663086883
Discord: / discord

Пікірлер: 22

@stephenwheeler76 2 жыл бұрын

I didn't buy into the wash for awhile but now once I learned how to use it I'm very happy with it, for me the good news is that with a little water you can remove any mistakes, thanks for showing us your method.

@joesanchez979 2 жыл бұрын

Looking good 👍

@genessismodels 2 жыл бұрын

Thanks 👍

@cococalm 2 жыл бұрын

Great video btw :-)

@genessismodels 2 жыл бұрын

Thanks! 😁

@coloredtutorials5537 Жыл бұрын

HI, The product you show in this video (the wash) seems very helpful to me and with your shop´s very reasonable prizes id like to buy it. tho i could not find it in said shop so could you perhaps tell me how to find it or even send me a direct link, id be pleasured!

@cococalm 2 жыл бұрын

I have a question that requires context. I have a lung condition and i am unable to use laquer paints and thinners as the fumes agravate the condition. What acrylic wash can I make that can wipe off with water or IPA (although my IPA attempts seem to have been rather agressive in removing the wash) ? I limit mask wearing to only when I rattle can spray gloss and matt varnishes as it is quick.

@genessismodels 2 жыл бұрын

this should do it mate www.genessis-models.co.uk/videos/weathering-wash-sludge-wash-for-panel-lines-tutorial-2-0/

@dukeofprunes66 Жыл бұрын

Hi. Good video. Could I use panel liner as a wash? Looks like your wash is water-based whereas panel line solution is usually enamel based and wouldn't be removed with a damp paper towel.

@genessismodels Жыл бұрын

Yes, absolutely you just apply it like a pin wash and remove with thinners

@MrLionelrichtea 11 ай бұрын

Hey wondering if you could help. I’m making a model using loads of different items beer cans, bottles, glasses, plastic cups… What would be the best technique to age them and it be permanent. Thx, love the technique featured above just not sure if it would work for my purpose. P.S I’m a bit of a noob at this.

@carlsmoot2939 9 ай бұрын

Aging can take on more than one approach depending upon the underlying material. Metal can be aged before it is used in assembly, however, it almost always needs additional work after assembly to make it look right. Most modelers do any weathering (aging) after assembly using oils, pigments, enamel washes, or acrylic washes. They then protect the finish with overcoats of either gloss or matte clear coats. It is often advantageous to overcoat between applications of different weathering techniques to protect them from subsequent work. One thing to be careful of is the compatibility of each layer with the layer underneath or the the next layer to be applied. They usually need to be different when using a clear coat as protection so that any use of thinners, alcohol, or mineral spirits doesn't wipe away the underlying clear or other layers. So for example, a model is painted in camouflage using enamel paints. Then it is overcoated with an acrylic clear gloss for decal application. Then another clear or matte clear after decal application in order to protect those from the weathering layers. Let's say you use oils to do the weathering. You would want to use an acrylic clear coat under that so that when you work the oils with mineral spirits, it won't attack the clear coat. Then another clear coat to protect that. There are numerous ways to attack this problem so test out your approach before using it on the model.

@carlsmoot2939 9 ай бұрын

So I have a couple of comments regarding this approach to washes. This is not a criticism, but rather an opening for a conversation. If the surface is glossed and most of the wash is wiped off, then is there any real advantage of this approach over using a finer brush to apply a more focus wash to the panel lines? Granted, it might take less time to apply the wash in bulk over a focused approach, but there is much less to wipe off this way and it's less expensive (doesn't use up the wash so quickly). I have seen how this bulk application approach can be used to dirty up a pristine paint surface but typically it is done over a matte surface and probably using either enamel washes or oil washes and then with less vigorous wiping. I suspect a Flory wash would work for this as well. This brings up another point of discussion, namely, the order of application of washes and oil weathering. It has been my experience that applying the panel line wash before overcoating and then applying an oil weathering, tends to hide some of the panel line highlighting and it needs to be reapplied in certain areas. I have switched the order of my weathering in order to alleviate this. Either way, after completing each segment of work, I always apply another clear coat to protect that work before proceeding on to the other work.