Weber 32/36 Carburetor Rebuild

Рет қаралды 15,466

Күн бұрын

Guys, in this video I’ll be taking the rebuild kit I purchased for my Weber 32/36 carburetor and updating some of the wear items. Overall mine was in pretty good shape. My intent in these videos is to help someone in their own projects. As always, if you enjoy these videos and find it useful, give it a like and subscribe to keep seeing more videos.
I hope you enjoy the video. Please assess your own capabilities before attempting anything you see in this or any other video.
Music: Sweet
Musician: LiQWYD
Music: My Go Away Dream
Musician: Not The King.👑
Music: Same Ol'
Musician: Philip E Morris

Пікірлер: 24

@ronarndt6722 2 ай бұрын

Don't forget to re-calibrate the float assembly 🙂

@peterlobb6456 3 жыл бұрын

Good video, given me the confidence to tackle my carb rebuild this weekend. Thank you!

@outdoortypelifestyle9489 3 жыл бұрын

Glad it helped! Once I started to dig into it, it wasn’t that bad.

@joshslocumb7936 3 жыл бұрын

So cool .. great How too info

@outdoortypelifestyle9489 3 жыл бұрын

Thanks!

@mikefriesen19 3 жыл бұрын

Great video thanks

@outdoortypelifestyle9489 3 жыл бұрын

Glad you liked it and thanks for watching

@gregoryschwarz2730 3 жыл бұрын

Gotta do this on my 72 VW Bus, thank you!

@outdoortypelifestyle9489 3 жыл бұрын

Glad you found it helpful!

@Tricky_Ricky15 3 жыл бұрын

Thank you @14:00

@outdoortypelifestyle9489 3 жыл бұрын

Yeah, magnetic nail finders are my friend!

@victoralcantara2767 2 жыл бұрын

thanks for the video... my carburetor works well my problem is that a lot of gasoline passes into my intake, I realized because when I removed it there was a lot of gasoline at the bottom of my intake... I hope you can guide me in a bit. thanks

@outdoortypelifestyle9489 2 жыл бұрын

It might be that you are running rich. There is a screw to adjust this ratio on the side of the carb. It is different than the idle set screw. Get the vehicle up to temp. Start turning the air/fuel screw clockwise. When you hear the engine want to stall, back out the screw 7 turns. That was the right number for the 4.2L of mine. If it’s a different engine then you’ll have to find the middle of stalling lean and stalling rich. I hope this helps a little.

@victoralcantara2767 2 жыл бұрын

@@outdoortypelifestyle9489 thank you 👍

@leshalliday2015 3 жыл бұрын

Could you please point out all the adjustment screws please especially the mixture screw.thank you.

@outdoortypelifestyle9489 3 жыл бұрын

Yeah, I’ll try to pull together a video to adjust the carb on the Jeep. The Weber I have only has two. One is for the idle circuit fuel/air and one for the idle speed.

@goodllookin1722 Ай бұрын

Why didn’t you blow anything out, what the point in the kit

@warkal868 2 жыл бұрын

What is the jet sizes you're using?

@outdoortypelifestyle9489 2 жыл бұрын

I think it’s just stock. That would be 150 main and 50 idle. It was already installed on the Jeep, so I don’t know for sure.

@goodllookin1722 Ай бұрын

Mickey mouse

@ryanadkins3076 4 ай бұрын

You should absolutely be spraying carb cleaner through all of the passages and jets. None of the stuff you did in this video will fix the issue you described.

@goodllookin1722 Ай бұрын

I agree

@goodllookin1722 Ай бұрын

He not doing anything correct