Webra T4-40 Four Props

Рет қаралды 512

Ай бұрын

Finally and outdoor run with tach readings on 4 different props.
Links to review article:
sceptreflight.com/Model%20Eng...
sceptreflight.com/Model%20Eng...
sceptreflight.com/Model%20Eng...
Link to Engine Manuals:
drive.google.com/drive/folder...
Follow me on Odysee too
odysee.com/@Davids_Stuff:3
To contact me via email please watch:
• How To: Search and Con...
Answer to a frequently asked question
• Do I fly airplanes? A ...
What I think of assumptions
• Post
To donate to help keep this channel operational please click the link below. All donations will be used to fund projects for this channel.
www.paypal.me/dmrcflyr2

Пікірлер: 11

@mikeeiben3430 Ай бұрын

Hope to see it run again, maybe with an 11x6 and a few different glow plugs. I'm glad you are enjoying Wisconsin!

@GOLTURBO555 Ай бұрын

Happy to see this beautiful engine back! Shes tricky! Sometimes, likes load, and not that much RPM, sometimes less load with more RPM. Anyways... a beautiful engine, that I ll be glad to have just to appreciate and of course run it. Thank you David

@Irvine7214x6apc Ай бұрын

Glad to see the Webra 40 back with a 4-prop test, as one guy below suggested I'd stick to what works best with regard to glow plugs, that being the OS F generally. I'm somehow convinced it should both idle and transition much better with that plug. Nice run though, thank you.

@toralfcross3819 Ай бұрын

I enjoyed watching this engine run as well. I think I agree with you David, I need to look at previous videos but I remember the engine running a little bit smoother with the #F glow plug. Especially noticed the difference at low rpm.

@luisgarza2036 Ай бұрын

It's good to see this webra engine test with 4 different props, i think maybe the webra#4 is not performing as well as we saw on the other videos with the os f glow plug, at least at this stage in the break in process. As always your vids fulfill my need to hear glow engines running. Thank You!

@dmrcflyr2 Ай бұрын

I agree the Webra plug seems a bit weak.

@weofnjieofing Ай бұрын

Great video David. Good comparison of prop performance. I think the transition issue is the plug. It’s a two stroke plug and webra make hotter plugs than the 4. I’d run it with the IS F it’s way more suited especially with low nitro fuels. Other thing you could do is run high nitro fuel like 20% on this plug.

@dmrcflyr2 Ай бұрын

Well the funny thing is that the Webra #4 plug was what was recommended in the manual that came with the engine. That is why I bought them.

@dww6546 Ай бұрын

Hi David. I still think there is a little timing error in the valve timing. If you disassemble the belt cover try to find a little point on the upper belt gear. I thought seeing a little point slightly on the left side top (about 11 o’clock) directly under the teeth of the gear on your disassembly video. Can you confirm that? Because this point should be absolutely on top as I remember my engine I had. I always ran my engine on OS „f“ plug and it ran very fine. Much better than the original plugs of webra.

@dmrcflyr2 Ай бұрын

Perhaps you can watch this video. kzfaq.info/get/bejne/adCIrdKZ0snadac.html I am not sure how much more I will be messing with this engine.

@dww6546 Ай бұрын

Hi David. Thanks for the reply. Well, these engines are often spicy with their timing. The smaller is even more a diva than the large one. In worst case the rotary valve doesn’t seal enough anymore and when exhaust timing is too late it blows back to the inlet. Otherwise with too early timing it may struggle very hard. All in all I wish you good luck and a lot of patience with this little beast 😉.