WEEBILL S SMOOTH SETTINGS // MY BEST WEEBILL S SETTINGS

No video

WEEBILL S SMOOTH SETTINGS // MY BEST WEEBILL S SETTINGS

Рет қаралды 70,125

Күн бұрын

Weebill S Smooth Settings - My Best Weebill S Settings. To get smooth footage with you weebill s gimbal. You need to adjust the weebill s custom settings. This is my Zhiyun weebill s settings for smooth gimbal footage. These Weebill S Smooth Settings will transform you zhiyun weebill s gimbal.
I often get the question of what weebill s gimbal settings I use, and I have shown them in two previous weebill s videos. But not in a dedicated Weebill s smooth settings video, where I go over how to adjust the settings on your weebill s gimbal and what I think is the best weebill s settings for mirrorless cameras.
When setup you weebill s, you always have the option to auto-tune the gimbal, which is okay. But to get the most out of your zhiyun weebill s, you need to adjust the weebill s custom settings.
The gimbal does not have to be in sleep mode to adjust the weebill s custom settings. Once you have adjusted the weebill s smooth settings, you can micro-adjust for the perfect fit for your weebill s gimbal.
I have enclosed a pdf for download that will explain the settings.
geni.us/Weebil...
Here is my Weebill s series:
• Weebill S gimbal
If you are interested in any of the weebill s accessories that I use, You can see them in the links below.
Zhiyun Weebill S
geni.us/rsq4v
Zhiyun Weebill S Pro Pack
geni.us/OFNFA
Camera Quick release plate
geni.us/Jkqw
Zhiyun quick setup kit
geni.us/X65eJ
Gimbal Grip
geni.us/a0jJoT
Dual handle grip for gimbal
geni.us/NspqYn
PolarPro 77mm Variable ND
amzn.to/2AaDaBY
KZfaq Creator Tools:
Tubebyddy:
www.Tubebuddy....
Morningfame:
morningfa.me/i...
FullTimeFilmmaker:
courses.fullti...
MY GEAR:
MAIN 6K CAMERA: geni.us/EV33Y9
SECOND 4K CAMERA: // geni.us/XmTCnS
FAVORITE LENS // amzn.to/2NGRmak
ON THE GO MIC // geni.us/k76p5
FAVORITE GIMBAL // geni.us/aFAP9
BEST CAMERA BAG // amzn.to/2Y7eOTI
BEST ACTION CAMERA // geni.us/A8bczDz
FAVORITE DRONE // geni.us/d9Fl2
SUPPORT MY CHANNEL // bit.ly/2Sk0EJw
SPECIAL THANKS TO // www.focusnordi...
PANASONIC LUMIX S1H // bit.ly/2EGsMk9
Make sure you subscribe to my channel!
Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or a service with the links that I provide, I may receive a small commission that will help support this channel, so I can keep creating content each week. There is no additional charge to you. Thank you for the support; it is highly appreciated.
#weebillsSettings #weebillSSmooth #zhiyunweebills

Пікірлер: 157

@PeterMakholm 4 жыл бұрын

I have been working on this CRANE 3S DUAL GRIP for a couple of weeks, and it completely changes the way you work with you CRANE 3S See all the benefits in the video here. kzfaq.info/get/bejne/iplzmZZixsnDhXU.html

@109eh 3 жыл бұрын

thanks Makholm. I sold my Crane V2 with my settings and I had problems with weebill S but I had not time to test the settings. I'm wedding videomaker in Brazil Your settings is very smoth. More than I expected. Thanks again

@PeterMakholm 3 жыл бұрын

Always mate. I hope they will help you with your weddings. Stay safe...

@yetcop 4 күн бұрын

These are definitely the best settings for the Weebill 3 and weebill 3s. Thanks for sharing them.

@Ivo_ 4 жыл бұрын

Thanks Peter, Thats the video I have been waiting for👍🏻

@PeterMakholm 4 жыл бұрын

You are welcome mate.

@sprEEEzy 4 жыл бұрын

I'd say the deadband is how many degrees before it starts reacting, not how much time. Would you agree?

@PeterMakholm 4 жыл бұрын

same same but different. Yes. degrees might have been the right term to use. Thanks mate.

@calmmelancholy493 3 жыл бұрын

thank you so much you saved me with the deadband and the smoothness settings because ive been suffering from sudden movements from the panning now its perfect thank you again

@Nickporter17 11 ай бұрын

This is still so valuable in 2023! Thank you!

@joyoffilming9500 9 ай бұрын

Perfect help - even after 3 years!

@mxrevival 2 жыл бұрын

Thanks for the settings! New Weebill-S owner & they are *_SO_* much smoother.

@BagsPackedFamily 4 жыл бұрын

Hey Peter. I just got the Weebill S for my birthday (thanks, family). Your video is perfectly timed as I jump down the rabbit hole of vlogging with a gimbal. My first question, of many, is which of the 6 gimbal film mode would you recommend to use when I’m walking/talking (selfie style)?

@PeterMakholm 4 жыл бұрын

Thanks, great to hear. I would just use pf mode.

@BagsPackedFamily 4 жыл бұрын

Peter Makholm thanks! 😆

@musicgearnetwork 2 жыл бұрын

Extremely helpful video. Thank you, I keep coming back to your videos often. I myself make a lot of tutorial videos on music gear and I can appreciate someone that goes the extra mile like you do with your videos. Subscribed!

@newellbarrett5537 4 жыл бұрын

Thanks again Peter, For your dextrous ministrations, you excellence is continuing apace

@shangaze 2 жыл бұрын

Thank you so much, Peter! These settings are perfect and my footage is smooth as! I haven't been able to achieve that before with my Weebill S.

@coleshill_production 2 жыл бұрын

These settings are amazing, I will put them to the test tonight when filming. But I can already tell these are better settings than i was using! Shall update later!!

@bodhicsutoros 3 жыл бұрын

your a life saver bro thanks for all the videos covering the Weebill s

@PeterMakholm 3 жыл бұрын

Bodhi Csutoros always mate.

@Manuelrehse 4 жыл бұрын

Thank you Peter for sharing your custom settings and going through all that testing for us. Im still at the beginning with that gimbal but with your help Im sure I will learn more

@PeterMakholm 4 жыл бұрын

Thaks mate. Glad to help.

@thedriversden9946 3 жыл бұрын

I've been noticing a bit of shake in basic movements with the default settings, so hopefully, these make a difference!

@twill_ch1647 2 жыл бұрын

I am having the same issues with myy weebill S please let me know if it helped

@daaddyo1249 2 жыл бұрын

@@twill_ch1647 getting dual handle grip helps a ton

@SanaullahSajjad 4 жыл бұрын

Got mine in the mail yesterday, video on my channel. Great Video though!🔥

@PeterMakholm 4 жыл бұрын

sweet mate. enjoy it.

@JellyB0B0 4 жыл бұрын

thank you. i been trying several setting on my own and it somewhat bumpy. Your setting is smooth in all aspect.

@PeterMakholm 4 жыл бұрын

Glad I could help

@AdventureMuse Жыл бұрын

Thanks, exactly what I was looking for! I have the Weebill 3 but still very helpful!

@pettersand5523 2 жыл бұрын

Thanks Peter! Liked your video a lot, saved me a lot of time!

@willycitajaya 3 жыл бұрын

I'm set on the motor to auto, but all rest of the setting I followed yours, perfect match.

@NIBUSVISUALCREATIONS 3 жыл бұрын

Thankyou, Peter Makholm Its really informative.

@Glen.Danielsen 4 жыл бұрын

Thank mammothly much, Peter! Extremely helpful ‼️

@PeterMakholm 4 жыл бұрын

You're very welcome!

@sondp 4 жыл бұрын

Smooth is actually how it eases in and out when controlled with the joystick And the higher the number the lower the smoothness, the lower the number the higher the smoothness

@sondp 2 жыл бұрын

@MovieFreak News I no longer have it, but yeah, try it and see

@jacquessteinman2735 2 жыл бұрын

You're right

@davetinoco 3 жыл бұрын

Peter, I know this has nothing to do with gimbals, but you should add a backlight to make yourself stand out from the background. It would look so nice.

@murillomr7 4 жыл бұрын

It’s really helpful when you bring your experience which is way more than basic tips. The best knowledge of weebill s. I have a question: I’m using your settings and My setup is light, just a7III 24mm 1.4 GM. Should I set less strength on motors? To avoid the ‘gitters’

@PeterMakholm 4 жыл бұрын

Yes. I would belive so. Your camera is lighter and you don't need that much power going to the motors. I would try reducing the numbers.

@fuatdomanic 4 жыл бұрын

Thanks for the helpful video. Please do not forget to engage the hi-pass (50-60 hz) filter/eq setting on your voice, still got some runaway rumbles ; ) Best regards 🖖

@PeterMakholm 4 жыл бұрын

Yeah thanks mate. My problem is that my office has 5m high seelings, but I am work is in progress to fix it

@muhammad_ali_zaidi 2 ай бұрын

Nice description!

@Micah-Woods 3 жыл бұрын

Man! Great settings. I tried these out and I like the sensitivity. 😄

@mikkelpedersen5008 3 жыл бұрын

wtf.. Troede aldrig jeg ville finde en film making related KZfaq kanal fra en dansker.. Var så forvirret over jeg kunne høre du var dansker, da jeg ikke tænkte der var chance for det haha Men får bestilt præcis denne stabilizer idag, and keep up the great work! :)

@PeterMakholm 3 жыл бұрын

Mikkel Pedersen Hey Mikkel. Det er korrekt. Fedt af høre fra en dansk seer her på kanalen. Held og lykke med din weebill S.

@thefreshmindfamily7363 4 жыл бұрын

amazing video. thanks for sharing you knowledge.

@PeterMakholm 4 жыл бұрын

Glad it was helpful!

@PangazShed 2 жыл бұрын

Great video! Cheers! I think it’s time for me to play with the settings, as PF is way to sensitive for my shaky hands 🤣

@wilson97128 2 жыл бұрын

Hello thanks for the explanations! Can you make a video explaining the function of your Tracking with the Panasonic Lumix S5,please?!

@Mahii35 2 жыл бұрын

Thank you its helpful 🥰

@Viniciofilms 4 жыл бұрын

Nice video Peter, could you tell me please how can I get the big rig weebill S handle you are using there??? thanks a lot and good luck!!!

@PeterMakholm 4 жыл бұрын

Thanks, yes this is the one you are looking for. amzn.to/3eZu2ib

@Viniciofilms 4 жыл бұрын

@@PeterMakholm thanks bro!

@Viniciofilms 4 жыл бұрын

I really love your job man I'm considering to get the weebill s gimble but I've heard about some broken lock mechanisms on it... Should I be worried about it? Really apreciate your comments here.

@FerdiGaleon 2 жыл бұрын

I thought my gimbal was defective. Didn’t save any of the settings I entered after turning it off. Thank you for this info.

@FromLifeUpNorth 3 жыл бұрын

Hi Peter! Thank you for the great content on ypur channel. I've seen a lot of your YTs and have a tip for you. I have searched a lot on the YT without finding any good video of these (costum) settings for the Ronin RS 2 or RSC 2. I've bougt the RSC 2 and are playing with these settings. I've done the research, now it's up to you to make the video :) Hope to see a video with this content from you. Have a great day and keep up the good work!

@nunosaraivaphotographer 4 жыл бұрын

Thanks a lot again! Hugs from Lisbon!

@PeterMakholm 4 жыл бұрын

You are so welcome! Stay safe out there. Pete.

@AlexTimelapse 4 жыл бұрын

maybe you got the magic combination settings to avoid the horrible roll motor wobbling i will give a try! thanks for this info

@PeterMakholm 4 жыл бұрын

Hopfully it will work for you. if you get motor vibrations, turn down the motor strength.

@AlexTimelapse 4 жыл бұрын

@@PeterMakholm i just got a little horizon wobble even walking super carefully, i see is a typical problem for many users, i will test if can be fixed by calibration or with your custom settings

@98JamesNixon 4 жыл бұрын

Alex Timelapse did you fix it? Having the same issue

@bhargavjani6467 3 жыл бұрын

Thank you so much for the video! Very helpful :-)

@chiribimchiribim 2 жыл бұрын

Hi Peter, nice video, thanks! If I always use the same setting (camera, lens) do I have to auto-tune every time I power on and off? Or once is enough?

@Knowell 4 жыл бұрын

Another great video!

@PeterMakholm 4 жыл бұрын

Thanks again!

@duck.cr3 2 жыл бұрын

I just realized that in this video at random points there's a very very deep bass sound I'm not sure why edit: if you're looking for it one of them is at 2:32

@kamrannazir7791 11 ай бұрын

Hi please tell me what is the names of 2 separate top and side grip

@MrAkulsingh 3 жыл бұрын

Hi. Need the weebil s settings. My gimbal seems to he very shaky even while walking. I have 2.05 update installed. U can share the settings. I will be able to Do it myself

@melissafestinese_fotografie 2 жыл бұрын

Hi Peter, Thank you for your Tutorials! Do you use the Same Settings for the crane 2s? Since the newest update i have jitter issues! But i cant get the Older Firmware to my crane because i cant connect to my Mac.

@griigsee8316 2 жыл бұрын

Hi Peter, which gimbal mode do you recommend for dancing video?

@BarefootMediaTV 2 жыл бұрын

my weebill s always seems to start tilting to one side, how do i straighten it out? the old zhiyun crane models would rotate a little right or left with the joystick, now that just pans and i cant get the shots to stop being off axis.

@varnamshans7536 3 жыл бұрын

thanks , some times recording is off signal connect with weebill s ?

@DigitalGenki 4 жыл бұрын

Thank you for putting a link to the dual handles in the description. Will you ever do a video review of the dual handle with the Weebill S? Does it help a lot?

@PeterMakholm 4 жыл бұрын

I actualy don't use the dual hande with the weebill s. Only with the crane 3s and lab. Because i like the L side grib withe the weebill s. With that i Can reach the Follow focus wheel with my thumb.

@BlackwolfImaging 4 жыл бұрын

I’m looking at picking up the S1H soon and I have this gimbal. Any problems balancing the S1H with a sigma 18-35 on the weebill s?

@bymakholm5358 4 жыл бұрын

That is not possible. The S1H is too big and heavy, for the weebill S

@PeterMakholm 4 жыл бұрын

The S1H is to big for the Weebill S. You will need a crane 3 lab or crane 3s.

@doubledark2 4 жыл бұрын

@@bymakholm5358 would Nikon D850+Nikon 16-35 work on Weebill S?

@EstorilSport 3 жыл бұрын

Hi, will you be doing a video for the Crane 2S settings in the near future? or would you recommend using the same settings as the Weebill?

@PeterMakholm 3 жыл бұрын

Yes I will do a video, the motor settings are set super low, but most of the advanced setting are the same. I am currently testing the setting and I have adjusted them a bit. I am also in contact with Zhiyun regarding the motor settings that are so low that they cant be adjusted. So video coming up

@mreppetti 2 жыл бұрын

Hi Peter! thanks for your video. I use this gimbal with a Sony A7iii + G Master 16-35 f2.8. When I calibrate the gimbal with the lens at 16mm it does more weight forward than when I use it at 35mm. Is it possible to have a correct calibration that works for the entire focal length range? If I calibrate it at 16mm and then use it at 35, sometimes when I pan from above to the ground (using PF mode) the camera "droops" back a bit, as if it were put into Vortex mode. Do you have any suggestion?

@GhostDunker 3 жыл бұрын

thanks, works fine also with crane 2s

@ThatMuscleGuy 4 жыл бұрын

Hi Peter I’m on the latest weebill firmware + the quick release as you recommend + the rode mic on top + your weebill recommenced settings This set up actually pushes the mic too high and it touches the axis when I go into sling mode , the motor also seems to be a little shaky even without the mic so I think it’s not perfectly balance ?

@PeterMakholm 4 жыл бұрын

Hi I would never put the mic on top of the camera, unelss you have a cage and can get the mic out to the side so it wont interfer with the backarm of the gimbal. If you get vibrations in any of the motors, adjust the settings until the vibrations are gone. You proberly will have to lover them a bit.

@kinnanakahar2813 4 жыл бұрын

Tq so muchhhhh...i can understand clearly ♥️♥️♥️♥️♥️♥️♥️😍😍😍

@7559kenny1 3 жыл бұрын

awesome settings thankyou

@bvmproductiesbe 2 жыл бұрын

Hey, I want my Weebill to behave just like my DJI Osmo Pocket. Do you have advice on what values the speed, deadband, ... have to be to come close?

@lifestylebyfornebuporten1328 4 жыл бұрын

Will you do a video of the Crane 3S with the dual handle you had on it in the video

@PeterMakholm 4 жыл бұрын

Yes. I am currently working on it.

@mhj00709 Жыл бұрын

Thanks for Good Tips=!

@LostTravellers 4 жыл бұрын

Hey, thanks for this helpful video but I still have a question. Is it normal that the Weebill S gets warm? The pan and roll axis legs are getting warm (not hot though) after some time, and I was wondering if that is normal or in some way is manageable by tweaking some settings? I used the auto-tune function and then did as you advised in your video (not saying the heat comes from these setting) :-)

@NigelAquascaping 4 жыл бұрын

When using an arca swiss quick release plate my Camera rises ofc and the lens support doesn't reach my sigma 18-35mm. Do you know a longer lens support version?

@kavanrana8500 3 жыл бұрын

My Weebill S starts spinning and vibrating as soon as I turn it on... what can I do? I even balanced perfectly.

@martinpoham3161 3 жыл бұрын

depends on your weightload, try differnt motor levels, if you choose the right one, everything is fine 👍🏼

@ranggadipta1676 Жыл бұрын

Please for crane 2s best settings

@kevinshabach 2 жыл бұрын

Thanks!

@ec1958 2 жыл бұрын

Whenever I tilt my gimbal down with the joystick the motors getting loud and vibrating insanely..is this normal?

@robertkwela8186 2 жыл бұрын

Hi Peter and thank you for your time Im having some issue with my weebill s first I need to manual adjust the horizontal level by Roll Angle for 2 degree and second when tilting up with the joystick after 45 degree it loose horizontal level again. Is that something common or my gimbal is faulty. Thanks

@oblkprod 4 жыл бұрын

hello, thanks for the videos. can the wheebil S carry a big dslr like the canon 1dx mark ii or a mirorless with a battery grip like the eos r. thanks

@PeterMakholm 4 жыл бұрын

It can carry the weight, but the camera is way to big. you need a crane 3s.

@mikehoffbeats4310 8 ай бұрын

why does the settings won´t apply to POV mode?

@krzysztofparda6482 3 жыл бұрын

Wooow, how did you get TILT motor strength 56. Mine is 5, and value above is causes vibrating of the gimbal, even if it is perfectly balanced. My gear is Sony a7s with Sigma 16mm. I'm still not satisfied of my video, it looks like shooting from hand. Unfortunately autotunes doesn't not works fine in my case. It always vibrating after I autotune. What goes wrong? Any suggestion how can I improve my settings?

@artmktadvertising 2 жыл бұрын

Hi Peter... I have some issues with my horizontal line .. not perfect.. already did six side calibration... and the settings is the same of yours... do you think can i do something to fix that? when i do a lateral movement, i lost the green horizontal line ... thanks for all your videos.. helping me a lot

@PeterMakholm 2 жыл бұрын

Hey. Go in to the menu of the weebill s and adjust your horizon. Press: menu - angle - roll. And adjust your roll axis.

@artmktadvertising 2 жыл бұрын

@@PeterMakholm i did... but i mean when i make some movement and lose the green line.. but he is back to the center after stop the movement ... maybe normal... right?

@PeterMakholm 2 жыл бұрын

@@artmktadvertising yes that is normal. but the the less you can get the green line to move the better you are at operating the gimbal.

@EE-zx1pr 3 жыл бұрын

Thanks mate great tips... I'd like to ask that my joystick does not move left to right.. Up and down is ok but I could not figure why it does not move left or right

@PeterMakholm 3 жыл бұрын

It depends on what mode you are in

@EE-zx1pr 3 жыл бұрын

@@PeterMakholm PF

@PeterMakholm 3 жыл бұрын

@@EE-zx1pr In PF MODE you can only go up and down.

@tonyleverett1483 3 жыл бұрын

Peter, did you ever identify a set of settings for the Weebill S using firmware 2.05, or did you move on to using the Weebill 2?

@PeterMakholm 3 жыл бұрын

I still use the same settings.

@frankvet1 3 жыл бұрын

Not working with the Sony a7iii. Software seems to be "beta" at best, is confusing and the movements don't approach anything that the DJI products can do quite easily. Sorry, I tried. Sent it back in exchange for DJI.

@bullistudio4757 3 жыл бұрын

Thnx bro

@sidhmalagar3031 3 жыл бұрын

Help ful

@varnamshans7536 3 жыл бұрын

nice one

@themunk6172 4 жыл бұрын

There are some strange thumping noises present in the video. Just wanted to let you know. Good work!

@PeterMakholm 4 жыл бұрын

allright thanks mate. It might be because i have the mic atached to my table. Will be fixed.

@RideHanna 3 жыл бұрын

I readjusted my settings to match yours exactly and the gimbal started to vibrate like crazy particularly on the upper tilt. Pan is painfully slow. Any Advise Peter?

@PeterMakholm 3 жыл бұрын

If the tilt motor vibrates. Lower the motor settings. Try to auto tune first... Those settings might be good. If the pan is too slow for you, adjust the follow settings.

@guzels_music 3 жыл бұрын

5:09 - all important information

@kainvfx1069 4 жыл бұрын

Thanks , the dual grip works fine?

@PeterMakholm 4 жыл бұрын

It is so dope

@Maestro1880 Жыл бұрын

Are these settings for all cameras?

@elgarnamocii3397 2 жыл бұрын

wow thank u so much

@realographystudios7035 3 жыл бұрын

I’m having issues with Weebill S horizon being off. I heard that 6 side calibration would fix it. I’ve never done the 6 side calibration before but decided to do it. However, without a camera mounted on the gimbal, it vibrates very badly, even after auto tuning. I tried changing motor settings, but after a few minutes the gimbal went to sleep, I assume because the motors overheated. Any thoughts/ideas about how to overcome this? How can I calibrate it while it’s vibrating, and will calibrating it fix the horizon problem. I’d like to reset to factory settings but I can’t find a way to do that, and I don’t know what the original settings were. BTW, it’s been upgraded to the latest firmware as of last week.

@PeterMakholm 3 жыл бұрын

Hi, Send me an email to peter@thegimbalacademy.com and i will send you a guide.

@mohitmojito 2 жыл бұрын

Hold the POV button and put the gimbal into sleep mode. Then do the calibration.

@vipanrajsingh 3 жыл бұрын

Can anyone help me! I am using same settings but everytime I switch to Go mode motors go crazy if pitch down. Is it normal? Also, why ZY PLAY APP keeps on disconnecting, do I need to update to latest firmware 😕😕

@CIA033 4 жыл бұрын

Thanks bro

@AlokShuklaArtist 3 жыл бұрын

Sir my joystick not working..& every 5..10 second show exis lock.

@user-hl9et5nk5b 3 жыл бұрын

nikon d750 + 80 - 200F2 = 2kilogram 200 grams , Zhiyun weeball S will it work ??????????

@carlosandreviana9448 3 жыл бұрын

THat lens is too long. It will never work properly

@fanikurti2420 3 жыл бұрын

having the smothness at 50 or 200 seems to be the same for me. The ease-in and ease-out is always harsh...

@mattcrane1 3 жыл бұрын

This is the same issue I've been struggling with for quite some time. I need a quick-ish panning speed, but the ease in and out is so harsh!

@jsosh100 3 жыл бұрын

my Weebill s starts spinning like crazy when I turn it on. Any ideas why?

@PeterMakholm 3 жыл бұрын

What firmware are you on.

@joshuahagan3860 3 жыл бұрын

@@PeterMakholm I just updated it to the latest firmware. It still does it

@jsosh100 3 жыл бұрын

@@PeterMakholm 2.02 !

@jsosh100 3 жыл бұрын

it actually stopped spinning, but now it won't look straight. It seems like the pan axis is not set to look straight? is this a firmware problem? when I tap the trigger to make it look straight, it adjusts to look diagonal.

@ankit-travelandgadgets 4 жыл бұрын

Whatever peter will do i will do 🙏

@drummer_for_life1870 4 жыл бұрын

Using high quality headphones to watch this you have a low frequency rumble every time you put your arm/elbow on the table, cut the audio at 65-75hrtz

@PeterMakholm 4 жыл бұрын

Yea, had the mic mounted to the edge of the table, just moved it to a stand. thanks for letting me know.

@theinfinate 4 жыл бұрын

I know right, it was freaking me out!