Weigh station must knows (Basics)

No video

Weigh station must knows (Basics)

Рет қаралды 15,713

Howtotrucklife

Күн бұрын

Weigh stations are not hard, just read and follow the signs.

Пікірлер: 19

@danstafford5977 Жыл бұрын

If your truck is loaded with gross vehicle weight of 80000 lb expect to do an axle weight.

@hiramabiff2748 10 ай бұрын

Thanks

@danstafford5977 Жыл бұрын

Get yourself a laser thermometer and check the temperature of your tires they should not exceed 190 degrees Fahrenheit... tires that don't hold air pressure need valve stem replacement most likely.

@Howtotrucklife Жыл бұрын

Appreciate the comments. That would be a quick way to monitor tire pressure.

@danstafford5977 Жыл бұрын

Not all scales have that infrared technology... low pressure tires run hotter and subjective to blowouts

@Howtotrucklife Жыл бұрын

I was happy that scale house identified my flat tire before the tire got damaged. Just needed a new valve stem, and I was good to go.

@johnmorris7960 5 ай бұрын

It's actually the opposite. The low-pressure tire will appear dark or blue in the infra-red image they are looking at. On a heavy loaded trailer, the tire with the hottest infrared reading will be beside the flat tire or lower pressure tire.

@maxrp1 4 ай бұрын

Always Flip the Weigh Master the Bird!

@Howtotrucklife 4 ай бұрын

Dont have the balls for that

@maxrp1 4 ай бұрын

@@Howtotrucklife sarc

@nunomarquez847 7 ай бұрын

Dammit bobby! (Hank Hill)

@ericparrish1515 4 ай бұрын

Why you sleeping in there? They ain't got no shower

@Howtotrucklife 4 ай бұрын

I got a setup where I can shower in my truck. This way I can park wherever I want.

@user-lx6vw8tq3u 7 ай бұрын

Just run local and you'll avoid most of that

@Howtotrucklife 7 ай бұрын

Local is boring

@user-wb9xv7gc1m 6 ай бұрын

how borring

@kentlong1017 4 ай бұрын

You definitely aren’t a professional if the bead is broke it’s not going to take air unless you know how to just trying put air in it’s not likely to reseal

@Howtotrucklife 4 ай бұрын

I have got several back on the bead by using dish soap and moving the tire around. Sometimes raising it off the ground by putting the good tire up on a wood block. I use starter fluid at home but don't want to do that on company equipment.