Welding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London
Рет қаралды 94,866
7 жыл бұрынWelding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London
www.hightechmembraneroofing.co...
Here is a member of our roof installation team welding a flat roof to ensure it is watertight and storm proof.
At High-Tech Membrane Roofing we only use the best materials - this enables us to offer a LIFETIME GUARANTEE.
So if you need a new flat roof then call us at High Tech Membrane Roofing. Covering Essex, Kent and London
@paullindsay4798 11 күн бұрын
Went on the course for this but after doing 2 roof fast learned that your on your knees all day mine were killing. I jacked it and went to the glue down stuff or back to GPR
@advancedue476 2 жыл бұрын
Love seeing the comments full or roofers 🤟🇲🇽🇺🇲
@gmdgmd952 3 жыл бұрын
Turn your heatgun down a bit and take your time on the corner and covering buttstraps and your not pre welding anything you’re looking for at least 50 to 60 mm weld
@michaelberry1793 3 жыл бұрын
Lovely bubbly
@arunkumarsarunkumars209 2 жыл бұрын
This sheet uae ware Available...?
@advancedue476 2 жыл бұрын
Is it a pvc? Saw the bleed out on the last weld but it also seemed like his gun was on 10😂
@anthonymartin7229 Жыл бұрын
Buttstrap goes under your drip not just welded to the face. Lack of corner detail to raggle. Upstart should be barred down with field sheet then coverstrip. Good effort for your first attempt thankfully not my roof 😂
@mirbaum 3 жыл бұрын
👍
@Crazyman1212 3 жыл бұрын
Your welding a little too quick, especially your pre welds. Turn that your welder down to 7 and go half your current speed.
@advancedue476 2 жыл бұрын
Fr had it on a 10 right there at the end for sure
@premkumarkumar2397 Жыл бұрын
Masin ki kimat kya h
@jonnydanger7181 3 жыл бұрын
Field sheet must be wrapped 4” down over the edge with the sheet metal flashing installed over field sheet to assure attachment. Sheet metal flange then stripped in with 8” wide heat weld strip. This work must be stripped off and reworked.
@beauthornton793 3 жыл бұрын
We’re the roofers, we know how it goes. Mind your own business.
@scottpaterson9821 2 жыл бұрын
Yeeeha
@PeakyBlinder Жыл бұрын
Agreed, this is a poor instal, Please don't follow this, SPRA would love to see this,
@MrFlatroofer 2 жыл бұрын
I have just replaced a single ply roof,15 years old. The product itself was good, but the decking underneath had rotted and not safe to work on and there was 2 cuts on the upstand.
@jonnydanger7181 2 жыл бұрын
Sounds like a condensation issue. Did you add insulation?
@MrFlatroofer 2 жыл бұрын
@@jonnydanger7181 I added insulation ,but the contractor laying the single ply did not.
@jonnydanger7181 2 жыл бұрын
@@MrFlatroofer good job sir 👍
@KaayCR6 2 жыл бұрын
Thats an awful lot of bleed out
@jarrettsmith1757 5 жыл бұрын
But strap wasnt straight
@mattspacie7141 4 жыл бұрын
No edge protection Think they need to retrain welding
@user-eo6js3ic1b Жыл бұрын
not a bad job
@wesjones7215 3 жыл бұрын
Clean your gun all your welds are full of carbon
@davidowen1074 8 ай бұрын
That stuff is crap
SIG Design and Technology
Рет қаралды 2,4 М.
Kitpool Piscinas
Рет қаралды 6 М.
Архитектор Виталий Злобин
Рет қаралды 5 М.
Grupo DCC3000 - Central de Compras y Servicios
Рет қаралды 17 М.
Fixing and Patching Leaks
Рет қаралды 280 М.