Plastic welding with one of Polyvance’s nitrogen plastic welders is the fastest, strongest way to repair damaged plastics. Polyvance machines offer precise temperature and flow control to accommodate the different melting points of all thermoplastics. It is important to weld at the proper temperature. Welding at a higher-than-recommended setting could compromise the strength of your plastic weld.
PVC is a good example of a heat-sensitive plastic. If you weld it at an excessively high temperature, you will scorch the plastic, even when welding with nitrogen gas.
This video shows the difference of the weld quality when welding PVC at the recommended temperature versus welding at a higher-than-recommended temperature. We also used a tension tester to test the strengths of the welds. The average peak load for samples welded at the recommended temperature was much higher than the average peak load for samples welded at the higher temperature.
To maximize the strength of your plastic welds, use the recommended welder settings provided by Polyvance. And remember, hotter is not always better!
Chapters:
Overview: 0:00
About thermoplastics: 0:31
Melting temperatures: 1:00
Welding PVC: 1:25
Tension testing: 1:52
⚠️ Important ⚠️
- Always wear proper safety gear while working!
- The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.
✅ SUBSCRIBE to our channel for updates on our products and tutorials!
🌐 VISIT us at www.polyvance.com
📧 EMAIL us at info@polyvance.com
📞 CALL us at 1-800-633-3047
✉️ SIGN UP for our email newsletter at omniform1.com/forms/v1/landin...
👍 Follow us on social media:
- Facebook: / polyvance
- Instagram: / polyvanceofficial
- TikTok: / polyvance
- LinkedIn: / polyvance
Browse our products:
- Best sellers: www.polyvance.com/Best-Sellers/
- Newest products: www.polyvance.com/New-Products/
Check out Polyvance's plastic welders and welding rod:
- Nitrogen welders: www.polyvance.com/Nitrogen-We...
- Hot air welders: www.polyvance.com/Hot-Air-Wel...
- Airless welders: www.polyvance.com/Airless-Wel...
-Plastic welding rod: www.polyvance.com/Welding-Rod...
🎵 Music Credits:
"Sage" by Slenderbeats
From the KZfaq Audio Library
Narration:
Rob Rode