DIY Steering Stabilizer Install | Ford Econoline Van

Рет қаралды 31,837

4 жыл бұрын

Steering Stabilizer:
weldtecdesigns.com/ref/WeldTe...
6" Baja Grocery Getter Lift:
weldtecdesigns.com/product/wt...
**THIS KIT WILL NOT WORK FOR DIESEL VANS** In this video Jeremy will walk you through every step to you need to install our Fox steering stabilizer kit. He show out all the tools you will need and hardware included. This steering stabilizer is an easy/medium to install. It does not require any heavy lifting nor time strenuous work. It is simple yet makes the biggest difference when its on your van. This steering stabilizer application works not only on your lifted van but stock van as well. So don't worry if you don't have a lift kit or one of ours, you can still run this product on your van!
Contact us:
Phone - (619) 596-9831
info@weldtecdesigns.com | For pricing, quotes, inquires etc...
social@weldtecdesigns.com | For media questions, collaborations, sponsorship etc...
Weldtec Designs:
Web: weldtecdesigns.com/
For more info on the products we use to make these awesome vans or social content check out:
www.amazon.com/shop/weldtecde...

Пікірлер: 85

@joeyrobisonasframedoctor 2 жыл бұрын

Thank You!!!! Took me awhile to find this but MAN makes things so easy Front end 6' lift complete. On to the rear!!!!

@ds3552 2 жыл бұрын

I ordered the Fox, order processed and arrived in less than a week. Packaged well and all parts there. Installed today, the difference in steering is noticeable right away. Feels less loose. A bit of a hassle with u-clamps fitting over tie rod and into bracket but rest of job went well. All done on creeper in driveway. Thanks Jeremy

@WeldtecDesigns 2 жыл бұрын

Glad it all worked out, Thank you for your support!

@dejesus47 2 жыл бұрын

@@WeldtecDesigns How can I buy one for a 2004 e150

@Ddot1127 Жыл бұрын

@@dejesus47 l k 7

@POW2000 7 ай бұрын

Dang...so cool! I think I can do this! I will need to watch this clip a few more times. Thanks Jeremy

@biffdelaware 4 жыл бұрын

Thank You! Great video!

@WeldtecDesigns 4 жыл бұрын

You're welcome! I'm glad you like it!! 👍

@michacahan 4 жыл бұрын

Jeremy, how about a steering stabilizer for the Chevy Express van?

@broncogirl8232 4 жыл бұрын

Another great video thanks

@WeldtecDesigns 4 жыл бұрын

Glad you enjoyed it, thank you!! 👍

@theedchannel9295 2 жыл бұрын

My '94 Chinook E-350 with the 460 has a factory steering stabilizer. Do I still need the extra brackets or will the factory mounts fit? Thanks. I've been watching your vids for awhile and have started subscribing.

@3apples10001 3 жыл бұрын

Good work👌👍

@WeldtecDesigns 3 жыл бұрын

Thank you! Cheers!

@EstebanViquez 2 жыл бұрын

Awesome!!

@redskins8025 3 жыл бұрын

Have you guys found any success in this stabilizer for work vans overloaded that have a wandering steering problem ?

@ronedelenbos272 3 жыл бұрын

Nice Stuff, is there a protective boot for. The shock shaft ?

@WeldtecDesigns 2 жыл бұрын

We can add one if you would like.

@robertdivany1627 2 жыл бұрын

This kit seems so easy to install. I would like to know where i can buy this kit

@rorybellamy2533 3 жыл бұрын

i'd like to try this, i have had 4 E vans with loose steering

@davidk1579 Жыл бұрын

I have an 06 e250 I just put new inner and outer tie rods on and the ball joints are just fine but I get up to about 72 73 I get the shake in my steering this is a new van to me is that common for these Econoline vans that have a little rough staring. Thank you.

@arok916 2 жыл бұрын

My E450 has a stock Ford steering stabilizer and has a bracket that isn't in your video and it also looks smaller than the Fox. Do you see any issue with simply reusing the stock bracket and location of the factory stabilizer?

@mikem8093 2 жыл бұрын

Nice tutorial;

@Klattu 2 жыл бұрын

Gas charged will pull constantly to the left ?

@peterlaurancearmenio5545 2 жыл бұрын

Holy crap the plastic stronger than steel

@ganja2369 2 жыл бұрын

Hi Jeremy, Thank you for the great informational video. Would this set up work on E350 Quigley? Thank you

@WeldtecDesigns 2 жыл бұрын

No, sorry this will not work on the Quigley 4x4.

@ldygzlle1291 2 жыл бұрын

I have a Quigley... What one should I use?

@jocelynb8935 3 ай бұрын

Cool I think I could install this….however I want whole grocery kit so I think I’ll leave it all to the pros……I’ll be making my appointment later this fall.

@ds3552 2 жыл бұрын

I see you also sell a King stabilizer for the same application, any preference? How much more of a hassle is it to drill those 3 hole with stock suspension in place? I have a 2022 Jayco Class C.

@WeldtecDesigns 2 жыл бұрын

It's not that hard with the stock suspension on it, We do have a new kit coming for all the RV'ers out there that don't want a 4/6 lift kit.

@bdillworth88 8 ай бұрын

No sway bar needed when installing this stabilizer?

@coco9004 Жыл бұрын

How muxh cost the parts sbd tools to do the job on a 2003 v10 3-450 super duty box truck?

@bautroiconnecticut5201 2 жыл бұрын

Do you have 2014 ford e 350 ?

@pnum9618 2 ай бұрын

will this kit fit the stock front suspension set up on a 2004 Ford E250 thanks for the reply

@wilsoncontreras3174 Жыл бұрын

Hi Jeremy, I had the same gas steering stabilizer installed in my 2021 E450 motorhome with 10k miles. Now, I get a constant pull to the driver side, even after a front wheel alignment. Any thoughts what could be causing the pull to the left?

@WeldtecDesigns Жыл бұрын

The SS is not causing the drift, typically you need more caster on that side, Try that and let us know.

@pete3288 2 жыл бұрын

Where do I order it?

@russwentz3957 2 жыл бұрын

Does the tie-rod steering assemble have to be removed to install this stabilizer?

@hedlcm 2 жыл бұрын

I just installed mine with out removing any tie rod just with the jack in my driveway

@mpileckas83 3 жыл бұрын

Hey Jeremy, Can I do this in my driveway without jacking the van up or lifting it off the ground?

@josemartin530 3 жыл бұрын

I did it in my driveway, without jacking the van up. Really simple installation.

@mpileckas83 3 жыл бұрын

@@josemartin530 bro.. That was 9 months ago...

@iannmiller 3 жыл бұрын

Yes, it’s possible

@themueth 7 күн бұрын

Would this fit the F series?

@sdthyng 2 жыл бұрын

Is this a quick fix to solve loose steering caused by tie rod ends that should be replaced?

@MrIgottap 2 жыл бұрын

Not a “fix”, but a mask. Will also hide failing ball joints as well.

@Viajero69 2 жыл бұрын

@@MrIgottap My ball joints, though still decent, are going to have to eventually be replaced. Would installing this shock be a hindrance in knowing when I should replace the ball joints, or a good option for better steering in the meantime?

@fluterampal 3 жыл бұрын

Hi May I know what will make me want to do this? What problem does it solve? Thanks

@WeldtecDesigns 3 жыл бұрын

Think of this as a shock for your steering reducing the feedback you will get through your steering wheel when driving down the road.

@bjl8888 Ай бұрын

👍

@POLOAZTECA 7 ай бұрын

Question: What does this do? It only makes the steering harder to turn right?

@WeldtecDesigns 7 ай бұрын

It is a shock for your steering reducing the feedback that comes through the steering wheel.

@taadventures6312 4 жыл бұрын

Hello I have a 1991 E350 rv will this work on that year.

@MrScribe323 3 жыл бұрын

I want to know

@franknbery 2 жыл бұрын

so in the video you show us that your using a FOX stabilizer but on your site your selling us Bilstein whats the difference in the 2 different brands

@WeldtecDesigns 2 жыл бұрын

Hey Frank, Due to FOX being on a global backorder, we decided to collab with Bilstein as another option with how popular our steering stabilizer kit is. We also offer this with our King shock. There are price differences as well. All of the shocks have had really good feedback from customers, but some customers prefer to keep with FOX or want a more affordable option such as Bilstein.

@brianrizzi6321 3 жыл бұрын

What effect does it have on the steering?

@mr.bidnessman2469 2 жыл бұрын

Cuts down on some of the slop back and forth in your steering. It can also mask other problems you might have so check you’re ball joints and tie rods first to see if they need to be replaced.

@earthquakemagoon2505 2 жыл бұрын

Jeremy. What brand of drill bit is that?

@bitshtannicajohnson6957 Жыл бұрын

*Dullaf brand*

@earthquakemagoon2505 Жыл бұрын

@@bitshtannicajohnson6957 Cool! Thank you! Skål!

@richardsmith8289 4 жыл бұрын

Same everything for a 06 6.0 diesel? Thanks

@jeremyjohnson8361 4 жыл бұрын

NO, Typically we do a weld on mount for the diesels because they have a larger oil pan that comes really close to the FOX shock.

@fredg8199 4 жыл бұрын

Just grab one from an e450 school bus or ambulance.. The holes are already drilled in your vehicles frame, you will need to tap the proper thread into place. (Location of pre drilled holes is passenger side, just where the stabilizer is close to the frame.

@carstendonohue-moll8325 4 жыл бұрын

Is this available for the 3rd gen Ford van?

@jeremyjohnson8361 4 жыл бұрын

You should be able to run this on the 3rd gen vans. We have one we are building so i will take a look.

@carstendonohue-moll8325 4 жыл бұрын

@@jeremyjohnson8361 Looking forward to see it

@naturallyopie Жыл бұрын

Will this fit on a 1995 E350?

@WeldtecDesigns Жыл бұрын

Yes they will fit.

@cynful19 3 жыл бұрын

Jeremy, I just received the components for the steering stabilizer from Weldtec. I have a 1992 Ford E350 and my frame mounting bracket that I received from you does not look like the same part as in your video. It does NOT contour like yours. I know this part goes on the passenger side. Can you help? Please advise. Cynthia Songco 925.324.2692 This is the part I need to install so I can get my rig on the road. Thanks in advance.

@anthonybadillo8343 2 жыл бұрын

i’m looking for this but that could work for a diesel van can someone help me ?

@WeldtecDesigns 2 жыл бұрын

Hey Anthony, absolutely, we do have the diesel option for this kit. We have the FOX shock version (this is on backorder): weldtecdesigns.com/product/wtd-ford-e-series-fox-steering-stabilizer-kit-diesel/ and the Bilstein shock version (currently available): weldtecdesigns.com/product/wtd-ford-e-series-bilstein-steering-stabilizer-kit-diesel/

@larryg7752 2 жыл бұрын

Is welding required on Ford diesel kits?

@TheGhostGrenader Жыл бұрын

@@WeldtecDesigns Did you make an install video showing the diesel option being installed that covers the welding? I'm looking through the videos again to see if I can find one. I'd also like to know if welding it in interferes with doing a Baja Grocery Getter lift later on? Thanks! 🙏