WERA Tool-Check Plus vs HAZET SmartHolder (2300SH-1)

Рет қаралды 2,243

7 ай бұрын

More expensive, heavier, more bulky, without a belt port, the HAZET solution does not seem to be the best choice for the same number of elements (39) but the presence of long bits is a difference which may be of interest.
Regarding ratchets, the WERA ratchet (8001 A) has 60 teeth for more than 63 Nm, that of HAZET (863MB) 60 teeth for a maximum of ??? Nm.
The ULTRA version (brilliantly imagined by diezelle57) of the Tool-Check Plus allows you to place another mini ratchet (8008 A) held by a magnet to be put in place and by the excellent Rapidaptor via an H6 bit while HAZET does not allow a such extension.
We may wonder about doubling the Torx bits with security Torx bits on the WERA but in fact it is enough to prepare the composition of bits that we plan to use.
Plus chère, plus lourde, plus encombrante, sans port ceinture, la solution HAZET ne semble pas être le meilleur choix pour un même nombre d'élements mais la présence d'embouts longs est une différence qui pourra intéresser.
S'agissant des cliquets, le cliquet WERA (8001 A) affiche 60 dents pour plus de 63 Nm, celui de HAZET (863MB) 60 dents pour un max de ???.
La version ULTRA (brillamment imaginée par diezelle57) du Tool-Check Plus permet de placer un autre mini cliquet (8008 A) tenu par un aimant à mettre en place et par l'excellent Rapidaptor via un embout H6 alors que HAZET ne permet pas une telle extension.
On pourra s'interroger sur le doublement des embouts Torx avec des embouts Torx de sécurité sur le WERA mais il suffit en fait de préparer la composition d'embouts qu'on prévoit d'utiliser.

Пікірлер: 16

@bradyfilm 7 ай бұрын

Tiny little differences, one company does something slightly better than the other and visa-versa but in the end I think we all want both!

@ptstouring49 7 ай бұрын

Your videos very soothing. I find the Hazet to be the more attractive set of tools for the longer bits. I have been meaning to pick one up, but I have so much Hazet already it would be duplicative and there are other smartcase options from Hazet to consider. I can say that the Hazet ratchet and bit holder are nicer to me than the Wera but only marginally so. Hazet sockets seem superior whereas wera bits seem slightly superior to Hazet. I don’t have a Hazet chuck to compare to my Wera. Keep up the great videos, they are appreciated.

@diezelle57 7 ай бұрын

Yes, I have already presented Hazet (smartcase) sets but I preferred those from Facom, in my opinion less bulky and better designed. It is true that only Hazet offers long bits...

@MeuReview 7 ай бұрын

Great Review my friend!! I liked the the hazet bits due to rust protection :)

@richmondstar4354 5 ай бұрын

Wera offer that twist locking for sockets on there other cases/holder. Wish they offer that on this too. I thought I lost one of my sockets before luckily came off only inside my bag….regarding customisation on the Wera, anyone with have a know how to 3d print can easily add a holder for a longer screw by removing some bits that are not gonna be in use and print a holder sitting on those empty holes to secure the 3d printed holder…perhaps 3 longer bits lying horizontally on each row so 6 longer bits in total.

@Skobeloff... 7 ай бұрын

The inclusion of square bits in the hazet is a no for me, never needed them, they should offer multiple kits.

@EdAtoZ 7 ай бұрын

Diezelle, Throwing out cost, since I do not know any of the pricing. I think I would go with the Wera set. By the way I got the ICON Locking flex ratcheting bit set 35 pice part number RXFT-35, for Christmas. Which is a rebranded Facom. What little Facom stuff was in the stores have been replaced which rebranded items, not good.

@diezelle57 7 ай бұрын

WERA 72 € HAZET 96 € When we have it manufactured in China (Taiwan)... in short, I don't know how FACOM, now let's say STANLEY BLACK & DECKER, manages the Taiwanese copies of its products (Icon Tools = Harbor Freight Tools/ and other brands)... I simply note that German tools, manufactured in Europe, do not experience this type of inconvenience and remain permanently protected from being purchased by SB&D :)

@boatboaty4037 5 ай бұрын

Any major difference between wera-gold bit and wera-silver bit?

@diezelle57 5 ай бұрын

Résistance ...

@danyvuong4145 7 ай бұрын

Slt, je voudrai avoir ton avis sur les cliquet Snap On, car on voit jamais tester ca sur ton chanel, vs le reste comme du Facom....des model EU. stp

@diezelle57 7 ай бұрын

L'outillage Snap-On est vendu beaucoup trop cher ici en France. Et ce que j'en vois ne m'attire pas particulièrement, c'est assez rustique, lourdingue, on est loin de la perfection de FACOM et de l'enthousiasme de WERA !

@danyvuong4145 7 ай бұрын

Merci de prendre le temps de m'avoir repondu ^^ @@diezelle57

@johnnytightlips7628 6 ай бұрын

parce que Bahco appartient à Snap-On, le cliquet Bahco 6950 est fabriqué par Snap-On, les composants internes de la tête sont identiques, j'ai acheté sur Amazon Espagne pour environ 35 € il y a quelques mois...