Oh my!!!!!! *squeals with delight*. This is the MUST have tool for me!
@jcwhimzie4 жыл бұрын
Wow, wish they had come up with this tool 20 years ago when I started scrapbooking.
@minimini47923 жыл бұрын
I am so in love with this product
@WeR_Makers3 жыл бұрын
We’re so glad!
@wyodestiney8 жыл бұрын
Omg get my credit card! No more pictures falling out of the tops of my project life pages
@jennhoff034 жыл бұрын
I NEED THIS!!!! I have been using my wood burner and my food sealer, but the food sealer warps the sleeves and the wood burner is hard to line up straight. I am getting this right this second!
@pukkavidz2 жыл бұрын
Took me ay too long to find this product. Does exactly what is says on the tin!
@veryblessedtoday74192 жыл бұрын
I just got one. Hopefully, I do better by watching these videos. First time was not good.
@MrElijennings258 жыл бұрын
What size is the screw part of the tips. I have other tips (from an old wood burning tool that no longer works) and would like to know if the tip's screw size are compatible with the fuse tool.
@Debbstar10006 жыл бұрын
I am in Australia and would like to know why we didn't get the circle piece to the rod part so we can put it on the stand?
@donnaburrows86865 жыл бұрын
Debbie Smith just bought one and am wondering the same thing. Is it an accessory we need to purchase?
@kright11009 жыл бұрын
Genius!
@BooksAndTea589 жыл бұрын
I would love to buy this tool but unluckily I live in Italy. I know that on your website you sell the European version of this item, but when I read the shipping infos there it said that you only ship to the US. I was wondering how could I get myself one?
@kaycollins62428 жыл бұрын
I would like to know what I can do to keep the roller part from sliding, sometimes it sticks and just slides across the plastic.
@WeR_Makers8 жыл бұрын
+Kay Collins A couple things that might help.. Make sure the head is clean and screwed into the tool tight. If you still have problems, contact customer service at info@americancrafts.com and they'll take care of you!
@jessieben2208 жыл бұрын
I have the same problem. The roller part doesn't roll on plastic. I made sure that the head was clean and screwed into the tool tight. I don't understand why it rolls on paper but just slides across the plastic.
@WeR_Makers8 жыл бұрын
Jessie Jessie reach out to our customer service and they can replace your head. Their number is 1800 879 5185
@brittanysherman88014 жыл бұрын
Make sure you use a mat underneath that isn't plastic. A glass cutting board works, a slab of marble or the we r memory keepers magnetic mat. Its a game a changer and helps the wheel to slide across without getting caught up on the plastic cutting mat
@jennifergodfrey21309 жыл бұрын
Any way this fuse can fuse together two page protectors like the flush bound pages you sell? That would be amazing!
@WeR_Makers9 жыл бұрын
+Jennifer Godfrey Yes! The Fuse tool could absolutely fuse 2 page protectors together!
@jingorokitty9 жыл бұрын
Does the tool work for any brand's page sleeves/protectors? When you use the cutting head attachment, will it cut through just one layer of the sleeve or both? Do you recommend inserting a piece of scrap cardstock as backing if I only want to cut through one layer of the sleeve? And pricing info please!
@WeR_Makers9 жыл бұрын
jingorokitty Sorry it took us so long to respond!! The tool does work with any brand page protector. The cutting head will only cut through one layer unless you leave it on the plastic too long. You could always use the metal Fuse ruler to slide in between layers if you're worried about cutting through both.
@WeR_Makers9 жыл бұрын
jingorokitty Sorry - forgot to include pricing info.. It retails for $29.99
@mycreativesoul_scrap8 жыл бұрын
precioso,donde puedo conseguir ese troquel de globo y los sellos del elefantito.Un beso
@claunefer8 жыл бұрын
+MARIA BAUTISTA si estás en México, hay una página en facebook que se llama Scraptools ahí lo consigues y de excelente precio!
@mycreativesoul_scrap8 жыл бұрын
Gracias ya lo consegui
@tiarebabygirl8 жыл бұрын
Can you use any kind of page protector with the fuse tool? Or does it have to be a certain kind of thickness/page protector?
@WeR_Makers8 жыл бұрын
You can use any page protector or plastic paper material. The thickness will determine your speed and pressure with the Fuse tool.
@mtgmystery7775 жыл бұрын
Nice
@titaniumgirl552 жыл бұрын
I bought this tool awhile ago, I think I got it from Scrapbook made simple, took awhile to open it. Dug it out to use it the other day and it has a European plug! Help!
@WeR_Makers2 жыл бұрын
Hi! For assistance please contact our customer service team via email here: info@americancrafts.com. They’re open Mon-Fri from 8-5pm mountain time.
@lisacornelison83628 жыл бұрын
What is the scalloped side of the ruler for? I can guess some used, but curious what you indended it for.
@WeR_Makers8 жыл бұрын
You can add fused scalloped edges to the top or bottom of you pockets... Great for embellishing your pocket scrapbooking
@dharikarajsingh31898 жыл бұрын
do we need a heat resistant mat or which are the other materials we can use
@WeR_Makers8 жыл бұрын
We recommend our glass cutting mat or our Fuse heat-resistant mat.
@mateus870806 жыл бұрын
Gostaria de saber a referência do plástico que usa .
@andrsn4u4559 жыл бұрын
Where, when, how much is this going to cost me I want this cool gadget ;-)
@WeR_Makers9 жыл бұрын
Martha Anderson Sorry it took us so long to respond! The Fuse is available in some retail locations and online now. It will be an HSN special July 1st and will have a worldwide release August 1st.
@TheKaydie9 жыл бұрын
I purchased the Fusable Paper when We R Memory was on HSN last week. I received my order but there are no instructions of what or how to use. Please let me know where I can find this as now I have a pack of paper and don't know what I can do with it. I do have the Fuse tool and am anxious to learn.
@WeR_Makers9 жыл бұрын
Judy Krueger The Fusable paper works with the Fuse tool just like the page protectors, only you can emboss and die cut beautifully with it first! If you want to email us at wrsocial@americancrafts.com we could get you an instruction sheet that might help. In the meantime, check out all these inspiring projects on our Pinterest board www.pinterest.com/wermemorykeeper/fuse-tool-projects/
@robinmisemer20908 жыл бұрын
I gave purchased the fuse tool and I am very disappointed! It doesn't fuse anything' I don't know what I am doing wrong. I waited to to purchase this item before I purchase anything else,, what specificity can and can't be fused?
@WeR_Makers8 жыл бұрын
+Robin Misemer We're sorry you're frustrated with the Fuse tool. A few tips that may help... The tool will only fuse plastic products together like page protectors and our FUSEables plastic paper. You will need to practice speed and pressure depending on how thick your plastic is. The thicker the plastic, the slower and harder you'll press. The thinner, the faster you'll go with lighter pressure. If the tool still isn't working for you after some practice with these tips, contact our customer service at info@americancrafts.com for additional help :)
@RayaWhisse9 жыл бұрын
Is it possible to purchase the fusing tip separately? I have lost mine and am not to happy at the thought of buying the whole tool just to get a new tip :/
@WeR_Makers9 жыл бұрын
Cecilia Gjersvold We don't currently sell just the fuse tip, but contact customer service at info@americancrafts.com and they'll take care of you. We are selling Fuse tips this September!
@marianaokas7 жыл бұрын
i bought one, and it doesn´t bring american plug, and mine doesn´t woks it never seal the plastic
@WeR_Makers7 жыл бұрын
Hi Mariana, we have different Fuse tools for the US, Europe, and Australia. You'll need to have to correct one for it to work properly. Also, be sure to allow the tool to heat up for at least 10 minutes prior to use. If you still have questions, you can reach out to acinfo@americancrafts.com.
@MrElijennings258 жыл бұрын
What size screw fits for the fuse tool tips?
@WeR_Makers8 жыл бұрын
+Eli Jennings We'd love to help, but not sure we understand your question... We do sell different tips for the Fuse tool, but not a screw tip...
@gailcob16 жыл бұрын
My fuse tool rolls over every surface except plastic. It sticks and just slides. I've tried many different thicknesses but with the same outcome. When I take it off the plastic it rolls across smooth cutting boards and anything that isn't plastic. The slower I go, the more mess it makes.
@WeR_Makers6 жыл бұрын
Hello! We're sorry to hear that. Here are a few trouble shooting tips: 1) Heat the tool for at least 10 minutes before using; 2) practice ahead of time on a scrap of the material you're going to use for your project; 3) Try different speeds and levels of pressure to find what works best with various materials. It sounds like you may need to move your tool faster over the plastic. What type of plastic are you using?
@gailcob16 жыл бұрын
I have tried various plastic sleeves, thick and thin, I've heated the tool for 10mins, 15 mins, 30 mins... I've pressed hard and soft, I've rolled slowly, and fast. The head doesn't turn, just slides and does nothing. I've tried leaving it on the plastic but it just makes a gaping hole. I've watched many tutorials but my tool doesn't do the same as the tutorials. Pretty much an extremely expensive dud.
@WeR_Makers6 жыл бұрын
Sounds very frustrating. We're sorry about that. Please contact customer service at acinfo@americancrafts.com for help. Your tool may be defective.
@cathyconey32737 жыл бұрын
Can you fuse a sleeve to faux leather? I have a project
@WeR_Makers7 жыл бұрын
The Fuse tool is only engineered to work with thin plastic, like sheet protectors, thin acetate, or our FUSEables plastic paper.
@GrannyMal9 жыл бұрын
Where can I buy the waterfall sleeves?
@WeR_Makers9 жыл бұрын
Nellie Rose Here is a link to purchase on our website www.wermemorykeepers.com/default.aspx?PageID=958 You can see all other online buying options by searching for "we r memory keepers waterfall sleeve". The Fuse will be on HSN July 1st - which will include waterfall sleeves... and they will be readily available in stores August 1st
@janedoe-cr8ib6 жыл бұрын
I’m still not sure I get how this works, there should a lot more closeups in this video. Its always just seconds and filmed fromthe right (so the hand holding the tooland what the tool is actually doing is hidden behind the passive hand - who on earth filmed this lol). And when it becomes interesting suddenly we’re zoomed out again, bam. It would be great to have a video with a “virgin” sleeve and showing how to section that from start to finish or how to even create a layout and then change it etc.
@WeR_Makers6 жыл бұрын
Hello! Thanks for the feedback. We'll pass that on to our marketing team. Here are some more Fuse tool videos that should help: kzfaq.infosearch?query=Fuse If you need any further assistance, please contact customer service at acinfo@americancrafts.com.
@BoeserSmettaling8 жыл бұрын
I bought the fuse tool in germany, with the EU plug. But the international version of the fuse tool is a shame. It's just a thin plastic thing. No brand. No extra ring at the metallic part to hold it in place while lying in the stand (warm up phase f.e.). Bit it isn't cheaper than the US version, so I don't know why you did this oO I mean the US version looks better, nice shape, kinda comfortable in your hands, this extra ring at the top.
@WeR_Makers8 жыл бұрын
+BoeserSmettaling We are so sorry for the design differences in the tools! We decided to make those changes to keep the price down for our International friends due to the cord conversion costs... We truly apologize and hope you know the tool will perform as it was intended and developed to even with these differences. Thanks for reaching out and if you have further questions you can reach out to our customer service at info@americancrafts.com :)
@BoeserSmettaling8 жыл бұрын
+We R Memory Keepers Makes sense. But I 've paid a few euro more for your us design (here in our stores)... but the the tool works fine! Except the design I won't miss it anymore.
@WeR_Makers8 жыл бұрын
So sorry for your disappointment in the International tool design changes :( No - we do not recommend using any self-healing mat with the Fuse as it will melt the mat. We recommend our glass cutting mat or our new heat-resistant Fuse mat that has a handy tool holster. As for the mat colors, it used to be pink and is now turquoise. Looks like we just need to update our site!
@alisonjones30577 жыл бұрын
the UK version of the fuse tool is vastly inferior to the us version. the UK one has none of the safety features and the build materials are cheaply done compered to us model . sadly then I won't be buying this tool until the company improves the European version ! 😑
@WeR_Makers7 жыл бұрын
We're sorry to hear that. If you need help with a defective tool, please contact acinfo@americancrafts.com and they'll take care of you.
@doodahgurlie3 жыл бұрын
Yet another crap product from WRMK. Half your products are so badly designed and/or QA'ed. They don't work as marketed. My perforated wheel just slides along the top of the plastic and doesn't really seal. If I am lucky, I might get 15% seal on a portion of the plastic, but it's not a strong seal and will easily rip. I'm losing faith in everything you guys put out. But boy, do you guys market the heck out of stuff to make them cool and must-haves.
@WeR_Makers3 жыл бұрын
We’re sorry to hear that. We’ve gotten a lot of positive feedback from so many crafters about the fuse. We recommend contacting our customer service team via email here: info@americancrafts.com. They can offer some tips for success and troubleshoot any potential problems