Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

You do not want it too bouncy as it will cause more damage to the child such as long bone injury. The bounce is rated in HIC (head injury criteria) using a Triax head drop tester. The base material is not the major cost but is important for surface stability. The main cost is the polyurethane used to binder the rubber granules on the surface wear layer.

Please, sent me pictures or video of how you do it

HAHAHAHAHAHAHA

Lol... is it bad I think this is cool and entertaining

Damn my life going down hill. That sucks I just thought I was bored.

😅😅😅😅

The comment made me smile.. the channel name made me lol

The products used by Rubaroc was from A1 Rubber, also Urban Play and several other companies. A1 Rubber is the largest supplier in Australia and NZ and does not install themselves therefore competing with it's customer base.

Hi Barry, we will be sending to Home Base the DIY kits in the near future but in the mean time you could try MRI Polytech, I know they have the MDI Polyurethane binder but may be able to assist with rubber granules too.

Yes it can be applied to any stable or compacted surface, crusher dust, road base, bitumen, concrete etc. not available from us yet in the USA but we may soon be adding to Home Depot in small DIY kits.

it is preferred to compact crusher dust or whatever you use to prep for a concrete slab, this will guarantee stability from rain erosion, weeds and good drainage. But technically it can be laid over weeds.

Raf M no

Em Jay your dumb as shit

@@wojo9732 Know more details in: Whatsapp:+86 15107149073

Yes wetpour can be used for driveways and walking paths. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

what kind of floor you want to install ?for running track or for playgroud ?there is one kind of pu top coat can be used to increase the tensile and tear strength , or you must use the good quanlity EPDM and more glue .

the binder is a single part MDI Polyurethane, ours is called Procure and the lube we use is an ester called Polysolv but the chemical name is Rhodiasolv. Diesel can be used but not as clean. see more at www.a1rubber.com

The lubricating is silicone? I can use water and soap as lubricant?

No the polyurethane coating causes it to self extinguish even with an accelerator . It would need an open flame >88 degrees Celsius for over several minutes to start it smoking

5 mm

Pickit fencing

yeh 4.99 lol

@@dennis12879 Know more details in: Whatsapp:+86 15107149073

Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

Hmmm. Good idea.

No sorry this is purely an outdoor product, it is completely porous and requires drainage.

Alecks1990 mı

Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

Why not

Tyyyyiii8

Tyyyyiii8

Thats OSHA approved required attire

You can buy direct from our factory www.a1rubber.com and see more at www.rotatub.com. we ship all over the world.

For your golf carts sure.

Usually 25mm is okay

Or with a 11kg heating roller. We use it a lot. Makes job easier and the surface smooth and firm. Very easy to use. Here is the video for reference: kzfaq.info/get/bejne/fZyadsVjyJmogKM.html

Hi. It is PU binder. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

use a straight edge and cut with a Stanley knife

You can use a ramp or key join. Just as long as your join is not only vertical. e.g. a 20mm thickness can step 10mm then horizontal then 10mm. This can be achieved with a small piece of 10mm beading pressed into the edge.

sorry to be offtopic but does someone know a tool to get back into an instagram account?? I somehow forgot the account password. I would love any assistance you can give me.

@Immanuel Kason instablaster =)

@Jadiel Carl thanks so much for your reply. I found the site thru google and I'm trying it out now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

@Jadiel Carl It worked and I now got access to my account again. Im so happy! Thanks so much you saved my account !

@Immanuel Kason no problem =)

That is a MDI Aromatic single part humidity curing polyurethane. A1 Rubber's is called Procure.

It will depend on which type of granule used but for SBR and CSBR (pre-coloured recycled granules) 20kkg of rubber to 4 litres of PU binder.

+Vlad Impaler thanks

What will be the proportion of EPDM and PU Binder

Both our EPDMs use 4.5kg of binder to 25kg bag of EPDM 1-4mm granules. if the size is smaller then more binder is required due to surface area.

Tons of things. Walk ways. Driveways. Entrance steps. Playgrounds. It's quite useful honestly.

There is version of this available through the Bunnings Chain called Pour In Place for pool surrounds or the commercial product is called Traqua

We will soon be supplying this through Home Depot in the USA and Homebase in the UK

Vlad Impaler have not seen or heard of it, what's the hold up?

check out www.miroadrubber.co.uk they sell all the materials you need to do this but please be aware they only sell to businesses and not the public. based in Bridgwater,Somerset UK. I cant have you waiting another year for big Vlad to get back to you.

Wear deck shoes lol

Know more details in whatsapp:+ 86 15107149073

No sorry it is purely an outdoor product as it is porous and water needs to flow through to clean.

No. For gym flooring we produce roll mats and tiles with these EPDM granules you see in this video. Top quality, factory price. Please let me know if you are interested. Thanks. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

+milldabeast519 they're based in qld australia.

Please see the mixer in my video. I think here is a mixer you need. Nice and cheap. kzfaq.info/get/bejne/fZyadsVjyJmogKM.html Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

The glue (binder) is a single part natural curing MDI polyurethane called Procure. see www.a1rubber.com for more details.

A1 Rubber

this is not about the laying, it is show casing the simplicity of the product. It is sold also as a DIY kit through the Bunnings Chain.

Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

@@eoszhang790 mi cel es +5491162944460 jose

@@josetomasadorno3747 Thanks for your reply. I just sent messages to you on WhatsAPP. My number is +8613816843215. Email: lily_gdf@hotmail.com

single component binder can be used to mix the rubber

Hi. This is PU binder. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

Know more details in whatsapp:+ 86 15107149073

👍

The wooden or plastic float is used for compaction at 3.02 he changes to a stainless steel finishing trowel.

Glad im not the only dick on the net that caught that.

You aren't a builder and apparently you aren't very observant either. It was leveled with a float and final step was done with a finishing trowel. You should probably just stick to your day job.

+watchthe1369 yeh like 70%

+Haste h thank you

Depending on the granules used 1-4mm will give fast drainage 120Litres per square metre per minute. The base layer if 4mesh or our Aero shockpads are used will offer 240litres/m2/minute . System is OneSafe. If a 1-2mm granule is used this will reduce the porosity down to only 10%, this will then require at least a 1-2% pitch to drain away. the 10% will allow any water trapped underneath to drain away and will give a firmer surface for outdoor furniture or light mobility vehicles, scooters etc. This is primarily used on aged care patios, around pools, verandahs, bike tracks and golf clubs, our system is called Cova Rubba.

I would recommend that you try dog bone pavers instead of this for your horses :)

You would need rubber tiles for horse barn flooring. Not sure if you need factory price rubber tiles. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215

I don't know way

This is a small example in a private garden bed it is not a worksite.

MrBlackbeltkickboxer n

No actually. It isn't.

This is not a sales site, purely discussion and info. We do not currently sell to the USA but we may in the near future to Home Depot. Sorry for the delay but we have been locked out of this account and only recently regained control.

A1 Rubber Would u want to sell to the RIGHT American? I sent an e-mail to you/filled out the inquiry on your website. The Google icon is the same as my KZfaq account. I approached RubberStone and didn't like the way they do business. If you absolutely will not sell to the US, do you recommend a US company at least? Shipping and customs are not impossible obstacles though!

We have no problem selling to America but freight costs prohibit it unless sold in large volumes. There is a company in the USA that has been following our lead, Sparton Enterprises.