what 3d printing software to use

Рет қаралды 535,364

Күн бұрын

bit.ly/skfbstore-apply
bit.ly/SKFB_insptuts
there are a lot of different 3D modeling and design software to create models for 3D printing . in this video we going to break these 3D printing software into 3 categories, first for beginners with no experience, high-end professional software, and then free professional software.
----------------------------------------------------------------------------
**Check out these amazing Blender Addons**
⍟Modeling:
Kit Ops 2 Pro
blendermarket.com/products/ki...
Hard Ops
blendermarket.com/products/ha...
Fluent
blendermarket.com/products/fl...
Box cutter
blendermarket.com/products/bo...
Mesh Machine
blendermarket.com/products/ME...
Cablerator
blendermarket.com/products/cb...
shipwright
blendermarket.com/products/sh...
⍟Architecture/Rendering
CityBuilder 3D
blendermarket.com/products/ci...
scatter
blendermarket.com/products/sc...
Botaniq Tree Addon
blendermarket.com/products/bo...
Sketch Style
blendermarket.com/products/sk...
E-Cycles
blendermarket.com/products/e-...
K-cycles
blendermarket.com/products/k-...
Grasswald
blendermarket.com/products/gr...
Photographer
blendermarket.com/products/ph...
⍟VFX, Simulations & Dynamics
Flip fluids
blendermarket.com/products/fl...
Khaos
blendermarket.com/products/kh...
Carl's Physics
blendermarket.com/products/ca...
RBDLab Addon
blendermarket.com/products/rb...
Spyderfy
blendermarket.com/products/sp...
⍟Materials/Texturing
Extreme Pbr
blendermarket.com/products/ex...
Bpainter
blendermarket.com/products/bp...
⍟ Cloth Simulation:
Simply Cloth
blendermarket.com/products/si...
⍟UV unwrapping
Zen Uv
blendermarket.com/products/ze...
Uv Toolkit
blendermarket.com/products/uv...
Uvpackmaster
blendermarket.com/products/uv...
⍟Rigging&Animation:
Human Generator
blendermarket.com/products/hu...
Auto-Rig Pro
blendermarket.com/products/au...
Animax
blendermarket.com/products/an...
voxel heat diffuse skinning
blendermarket.com/products/vo...
⍟Retopology
Retopoflow
blendermarket.com/products/re...
----------------------------
Check out the Blogpost:Visit our Website:
inspirationtuts.com/
inspirationTuts 2D Channel:
/ @inspirationtuts2d
inspirationTuts CAD Channel:
/ @inspirationtutscad
Help Us Create More Content:
/ inspirationtuts1
Facebook page
/ inspirationtuts-107526...
-----------------------------------------------------------------
**Check out these amazing Courses**
A-Z Environment Design using Trim Sheets:
gumroad.com/a/1058010227/IfmVI
SciFi Weapon Design in Blender - REMASTERED:
gumroad.com/a/1058010227/JHSLH
SciFi Mech Design in Blender:
gumroad.com/a/1058010227/VbKpb
The ULTIMATE Guide to Hard Ops and Boxcutter:
gumroad.com/a/1058010227/GnHrV
The BlenderBros Hard Surface Game Asset Course:
gumroad.com/a/1058010227/SbhQG
Essential Techniques for UV Unwrapping in Blender:
gumroad.com/a/1058010227/YsUhB
NITROX3D Full Course: gumroad.com/a/645461107/gVKvV
Disclaimer: Some links here are affiliate links that help us create more content. Thanks in advance for using our links

Пікірлер: 203

@marvinarmado6897 3 жыл бұрын

Ok ive decided.. im starting with tinkercad 😌

@fkins7296 3 жыл бұрын

Tinkercad ist better as it seems... esp. if you need not work in organic shapes.

@abominableX 3 жыл бұрын

How has your experience with tinkercad been?

@Bunny_1807 3 жыл бұрын

mee too

@monsieurpatate1573 3 жыл бұрын

@Kareem Andres flixzone is a scam

@hplive7399 2 жыл бұрын

I think i'll also start with it

@augmor Жыл бұрын

Very informative, thank you! Sketch up definitely seems like a good starting point

@donvidol 3 жыл бұрын

i moved to other softwares, but i used blender for 1 year for work purpouses and i loved it, and i admire the fact that is free

@andygonza1057 2 жыл бұрын

What you use it for ?

@andrewbwo 2 жыл бұрын

I’ve been looking for stuff like this for months now and this video is exactly what I needed better than google 😁

@octe-es 4 жыл бұрын

I consider the best one to print pieces for manufacturing or engineering fields is Fusion 360. I'm mechatronic emgineer and I worked with blender, solidworks and Fusion360, and the way how Fusion allows to create components within the assembly, I think thats great

@FlameRat_YehLon 2 жыл бұрын

Technically you can do that with all three software, though.

@LT72884 2 жыл бұрын

I as well am a medical and aerospace engineer. Used solidworks (cswp cert) autodesk stuff and i personally prefer sketchup pro. It works the way my brain works hahaha

@snarkymcsnarkface1863 2 жыл бұрын

I am a draftsmen by trade... I actually don't find any difficulty jumping between cad systems. it is more just figuring out the interface. I do find things with out a hard input system awkward though. being so precision minded.

@CaptainOverLoad 2 жыл бұрын

Same field prefer solid works or ds Catia. They work the way my brain works, came to this video to see what options were available they may be more effient but all the ones i know of were covered pretty much. :c

@ChrisMcNeely 2 жыл бұрын

Thank you, very informative, down to the point

@sualpozel1 2 жыл бұрын

Fusion 360 also has the capability to slice models and create tool paths and export them as G code for 3-D printing

@buyme1cnc 3 жыл бұрын

Thanks for your hard work to made this video

@titouanlormeau3200 2 жыл бұрын

I struggled for almost one year because I did not knew what to use. Wish I had found this video before 😂! But know I learned to use solidworks and fusion 360 and I really like solidworks ! It will be a very interesting video for people like who started 3D printing without knowing anything ! 😁👍

@phuquymaile8394 2 жыл бұрын

Oh yeah, it's me, I have complete no knowledge at all, I just think of 3D printing yesterday and I found this video :)) I think I would start with Blender :))

@vishnuvardhanavarmab4472 2 жыл бұрын

Best video to clear the doubts of beginners lyk me ! Good explanation and great work.

@phalhappy8612 4 жыл бұрын

Love your new mic

@ericcvt 4 жыл бұрын

As always, very informative

@mahanmokhtari5234 2 жыл бұрын

Thanks so much greatttt 🔥

@alaafantazia7718 3 жыл бұрын

What would you advise me if I had to make a plastic alternative to hand fracture treatments? Knowing that each hand is different from the other

@tturi2 2 жыл бұрын

you can use an xbox kinect to scan someone's hand

@Utilisateur-02 2 жыл бұрын

Hey it's a very good topic ! there is much software at hand

@TolisOnLine 2 жыл бұрын

Which is best for Remote Controlled Aircraft, considering thin wall 3D printing requirements for lightweight structures?

@camilleli9945 3 жыл бұрын

Hello, I'm new to this community. I just want to ask what kind of software should i learn if I like to make miniature and action figures? Cartoons and anime, game characters such. Also, what kind of paint to use?

@Crazyibbes Жыл бұрын

Great, Many thanks :)

@captainmee3469 2 жыл бұрын

thank... nice information

@kellyklaask7su990 3 жыл бұрын

Lots of good information here. Thanks!

@chefranylaitenu7731 2 жыл бұрын

Thank you so much for this video! This gave me much insight for my 3d printing journey 🌈

@ChampionGehlot Жыл бұрын

Hey

@surjomedia857 4 жыл бұрын

Very nice video 👍😊😊

@TGiFoosday 2 жыл бұрын

Nice listing of 3d modeling software, which should have been the videos title instead of 3d printing software because of what you showed and said at end. With this title there should have been coverage of the slicing software available and run down of features and quirks, as they are the actual software that is responsible for making a 3d printer print. I understand they can be more machine oriented and there is now a lot of different machines available, but still, video title is misleading while its a good rundown of 3D modeling tools available. Worth watching as it informs of tools not often mentioned elsewhere. 😀

@bhargavapothakamuri4218 Жыл бұрын

Thanks !

@ironcross1252 2 жыл бұрын

Does anyone have a suggestion which software would be ideal to create small crafts, collectibles, figurines and toys etc. for 3D printing?

@khushi_Sharma996 Жыл бұрын

Maybe tinkercad

@boasdelely1550 2 жыл бұрын

I prefer Fusion 360 because of the Autodesk ecosystem, design your PCB in eagle, export it to fusion, etc...

@waldemarpereirasilva8507 Жыл бұрын

Sempre quis um programa como esse é não sabia como obtê -lo, agora o vejo, mas como obter uma cópia do mesmoz?

@dabid1337 3 жыл бұрын

What would I use if I wanted to designe little models for table tops like D&D? I have fusion but it seems like it's more for manufacturing

@Smiles4Miles 3 жыл бұрын

Just scale it down after you make it.

@c3ramics 2 жыл бұрын

Blender for sure. As a mechanical engineer using solidworks, Creo, and fusion. Blender is built more for video game/organic modeling. I feel in blender type modeling it’s way less constrained and lets you rapidly model pieces with loose scaling. All the engineer ones are dimension driven and not suitable for rapid modeling.

@eneahaemmerli8288 Жыл бұрын

On witch website or software you make this?

@nathanhardesty4934 13 күн бұрын

What would be the best for robotics?

@michaelmichael1237 3 жыл бұрын

Best Video i found and helps 100 %. Love it

@ea1crl 4 жыл бұрын

Gracias por el video

@LT72884 2 жыл бұрын

As a medical and aerospace engineer, sketchup is my go to software. I am a cswp in solidworks and autodesk inventor as well. Sketchup works how my brain works, i even use it for character creation using artisan tools, quadfaces, and vertex tools

@sitiaminah6499 Жыл бұрын

Such a dreams job I guess

@Archangel657 Жыл бұрын

Would you know of any other 3D modeling programs that have similar work flow and ease of use as Sketchup? I've tried repeatedly to learn Blender but the tutorials are boring and cumbersome. Its like the creators of Blender intentionally went out of their way to make Blender difficult to use and learn. Unlike Blender, Sketchup was always super simple and easy to use for me, even tho Im not as versatile as the professionals, I have made a few decent works. I just wish Blender and other 3D Modeling software was as simple to learn and easy to use because Sketchup isn't that widly used outside of personal use.

@sitiaminah6499 Жыл бұрын

@@Archangel657 maybe Discreet 3DSmax for your information are easy to use

@LT72884 Жыл бұрын

@@Archangel657 sketchup is widely used for architecture. I know mant firms that use it:) Try design spark mechanical

@Marco-we9xu Жыл бұрын

merci beaucoup a toi :))

@samit0bg31 Жыл бұрын

How can I instal leopoly?

@chrisgebben2043 2 жыл бұрын

and also i can't believe meshmixer didn't make the list thats a great program to fix your models from all of these programs for 3d printing especially if they are scans from 3d scanners it might be a stronger version of Sculptris

@ghostrangerp.8819 2 жыл бұрын

Meshmixer is ok...but not considered to be professional....it's menu becomes too complicated where users need to go a look constantly at videos or manuals just for reference....

@gamecritic3649 2 жыл бұрын

Started making a toolbox with solidworks in school. Now I’m making rigs in blender!

@shanemoran4145 2 жыл бұрын

Solid works is definitely the best cad it just cost a fucking fortune

@cgpotato2365 4 жыл бұрын

Awesome 👍

@InspirationTuts 4 жыл бұрын

Thanks

@huonswales2322 3 жыл бұрын

👍

@JeJeNtwrk 4 жыл бұрын

1st. This is awesome

@zodyking4595 2 жыл бұрын

I dont consider sculptris & skeptchup as 3D Printing software, they are aimed at something entirely different. I have used them in the past but I am looking for something powerful and runs offline to quickly build and print, with tools to speed up the design process.

@dominicwilfong 2 жыл бұрын

I like designspark mechanical. It’s the closest to fusion I could find while free. Haven’t learned FreeCAD yet

@SKTWoodDesign 3 жыл бұрын

Thanks for the info.

@matthewross5447 Жыл бұрын

good to know

@aymanfaroukhamed999 2 жыл бұрын

You have really incredible knowledge. thank you I will learn solid work, I hope to find it easy. If you have link to learn it Please post it thank you very much for your video was excellent.

@trimoanthonie 3 ай бұрын

How about easypose app??

@Nico-dn7su 2 жыл бұрын

Anyone have the .stl of the lion in the thumbnail? Looks really cool

@icarus6113 2 жыл бұрын

Fusion 360 my love 😍

@blueyedevil519 2 жыл бұрын

Which one would be best for me to use for making Vape products like Drip Tips, unique shaped Box mod's, Shells, protective parts for the mod when you set it down it won't scratch the box mod, RTA tanks and stuff like this?

@thebalerman Жыл бұрын

Anyone else have trouble with freecad? I tried using it because it’s free but it is not intuitive at all and to make a print that can be changed in the future is overly complicated it seems. Maybe it’s just me…

@reyadarbia9662 Жыл бұрын

what about Hodini in 3D printing?

@leventekoncz2608 2 жыл бұрын

Shapr3D is worth mentioning too!

@gearslayer-vn3gz 2 жыл бұрын

I have access to solidworks and i am very happy with it but man the day i have to pay for it i will have to switch to a different program because it is built for business not personal use.

@VLena_art 4 жыл бұрын

NOO!! I WANTED TO MAKE THIS VIDEO!!!

@ramyissa20 2 жыл бұрын

I knew you will put blender number 1, big fanboy 😂

@straidg8590 Жыл бұрын

Does it matter printer that you’re using

@mclinn5919 9 ай бұрын

Looking into 3D printing. I want to make collectibles and figures from my drawings. Is there a 3D software that can scan my drawings to help me turn it into 3D?

@michaelrusso8072 3 ай бұрын

Are you on instagram? would love to connect and see your drawings.

@250smacks 2 жыл бұрын

I started with tinkercad then realized it lacks so using onshape now

@larrymoremckenzie3029 2 жыл бұрын

But which one's can be sucessfully run by a mac??????

@mistershifoo4387 2 жыл бұрын

Please, tell here some one, how of this list softwares is FREE?

@VLena_art 4 жыл бұрын

I use fusion 360 for 3d printing, but I fell in love with blender.

@divyebtw8360 3 жыл бұрын

Luka IJzendoorn from blender we can 3D print?

@VLena_art 3 жыл бұрын

@@divyebtw8360 yes. But fusion is more accurate and clean. Blender is not precise and messy, but really powerful!

@samlegacy1of1 3 жыл бұрын

Can you build something from

@VLena_art 3 жыл бұрын

@@samlegacy1of1 from?

@garycastaldo7692 2 жыл бұрын

Loved he talked about Creo (Pro/E), sad he talked up CATIA in areas he should of talked up Creo (Pro/E)

@ShahTalks 4 жыл бұрын

Love your videos and also can do a video on OpenToonz on your 2d channel

@InspirationTuts 4 жыл бұрын

Sure thing!

@jascrandom9855 4 жыл бұрын

wait... he has a 2d channel?!

@ShahTalks 4 жыл бұрын

@@jascrandom9855 yeah he has a 2d channel

@bunnyfreakz 9 ай бұрын

Zbrush for sculpting. Fusion360 for hard surface modelling.

@rodcav3 3 жыл бұрын

Not sure why you didn't cover Zbrush but you mentioned Sculptris instead...?????

@benjaminhewitt-richards3159 2 жыл бұрын

I can’t manage to find sculptures anyware, does anyone have a link or something, I’m hoping to creat 3D models

@benjaminhewitt-richards3159 2 жыл бұрын

I meant to put sculptris btw sorry

@benjaminhewitt-richards3159 2 жыл бұрын

Nvm i found it sorry for bothering haha

@Lame-Over 2 жыл бұрын

i'm glad he said Blender is #1

@mr.lunatic3157 2 жыл бұрын

Blender is number one (free*)

@josecasanova3502 2 жыл бұрын

Inventor???

@makewithmegma 3 жыл бұрын

👌👍

@adamtonder5558 2 жыл бұрын

can you please sand mi a link for the lion that is in youre video icon. I am sorry, i cant speak english very well. you know what i meen. alsow very nice video, like it...

@danycage6457 2 жыл бұрын

hello people, im considering to begin in 3d printing and obvisouly en 3d modelling of organic shapes, could you recomend me the best software to 3d modeling/printing based on your experience? i heard that blender is not a good idea at all for 3d printing, but its just a rumour

@mr.lunatic3157 2 жыл бұрын

It's a rumor..but for a beginner it can be hard if you're starting blender for 3d printing. But if youre familiar with modeling for other purposes you only have few things to consider if you're modelling for 3d printing..

@danielfourthdegreeburnhuls2376 2 жыл бұрын

Solidworks is by far the best

@chrisgebben2043 2 жыл бұрын

secret trick on fusion 360 its actually free if your only doing it for hobby or student purposes and you don't make a ton of money and it ask about that

@xgaming2576 2 жыл бұрын

I want suggestions pls

@Mauvmellow 2 жыл бұрын

Sad what happened to the comments on Tinkercad....

@chrislea8239 2 жыл бұрын

I was confused before. No I'm lost now. To hard mate.

@P_M_N 3 ай бұрын

Cinema 4D ?

@blackreelentertainment6663 2 жыл бұрын

If he mentioned tinkercad, im surprise that he didnt mention Mattercontrol. Almost the same software.

@a.yeshwanthk 3 жыл бұрын

Can you please suggest me few softwares (open source - free to use) to design furniture. I'm not a computer guy, but I want to design my own designed furniture in leisure. Thank you in advance, because you will suggest it.😀

@zzzzzz...9902 2 жыл бұрын

freeCAD

@joeking433 2 ай бұрын

Someone needs to come up with an improved Tinkercad!

@ErCapoAlex 2 жыл бұрын

♥️

@avivagmon9315 4 жыл бұрын

Can u make a video about slicing software plz?

@DiegoHerrera-kx5xe 3 жыл бұрын

Cura

@titouanlormeau3200 2 жыл бұрын

@@DiegoHerrera-kx5xe or prusa slicer

@mr.lunatic3157 2 жыл бұрын

Blender itself

@B.treveton 3 жыл бұрын

Maybe someone can help me! im trying to make a hexagon shape thats hollowed out, as i need to make some what of a sleve to put on an allen key in order to make it bigger! however every attempt i make seems to bring difficulties due to constraints already made. it took me a while to just get one hexagon which had a flat to flat of 6mm, and ive made another one thats 4.5mm for the ID diameter but i can no longer move it around and also dont have a way of lining them up so that they are both centered with each other. Any advice?

@fauzip4189 4 жыл бұрын

you missed one big boy: autodesk inventor

@wheres_the_fun_in_that 3 жыл бұрын

yeah thats for if you have money, they want $1400 a year for auto cad

@timothygooding9544 3 жыл бұрын

very easy to use but only usable if someone else is paying for it lol

@GEOsustainable 3 жыл бұрын

You waited until the very end to tell us none of these can be used for 3D printing...yet your title says...3d printing. And you never told us which ones can.

@saddex3d292 3 жыл бұрын

?? All of those programs can be used for 3d printing, don't know what you don't understand? You make 3d model extract it as stl or 3mf and slice it with cura, slic3r, simplify3d or any other gcode slicing software

@fuqorock 3 жыл бұрын

@@saddex3d292 i'm zero about this, can you recommend what software for beginner

@saddex3d292 3 жыл бұрын

@@fuqorock when ever you start with something new you can call yourself beginner and every program will be new beginning for anyone but fusion 360 for engineering/hard surface modelling or zbrush for organic modelling

@gezor20 6 ай бұрын

this seems to be just a listing of marketing texts

@vikadanathan1827 7 ай бұрын

Just came here for some curiosity😊

@josephadams443 21 күн бұрын

Oh my god. So many programs. Can someone please just advise on a free program that can introduce a beginner 3d printing beginner such as myself. I just want something easy to work with to get into it. I want to create something and get it into a program so i can create some 3d models. I would like to see some company recommendations or even 1 year discounted subscription to learn basics.

@fuqorock 3 жыл бұрын

I have one 3D graphic in format obj and stl, what software i should use to edit?

@khushi_Sharma996 Жыл бұрын

Stl

@jadfouani6563 3 жыл бұрын

can you use 3Ds Max for 3D printing? if you know please reply on this comment as fast as possible thnx :)

@husam2761 3 жыл бұрын

I think 3ds max is more suitable for scene modeling, but if you create a 3d model all you need is to save it as a obj or stl file and import it to slicer, if the software can do this then basically you can use it to 3d printing

@benzadrianz3811 2 жыл бұрын

How about maya? I started 3d modeling from maya.. 😫

@mr.lunatic3157 2 жыл бұрын

Maya is past

@stg_104 3 жыл бұрын

No ZBrush?

@alexas8787 3 жыл бұрын

No, not needed..

@monsterartmaker364 5 ай бұрын

I like Zbrush

@sniper04090 7 ай бұрын

With expierence (not alot but reasenable) i hate 3d modelling with autocad its more for 2d

@marcins5584 2 жыл бұрын

Zbrush isnt in the list???

@mr.lunatic3157 2 жыл бұрын

I think this list covered more like cad modeling ..zbrush is for organic sculpting type things if I'm correct right? I'm a blender user btw I've heard zbrush is easier

@marcins5584 2 жыл бұрын

@@mr.lunatic3157 when sculptris is on the list and its from Zbrush makers and all sculptris functions are in Zbrush then the list doesnt make sence....

@sheikhsofiane 2 жыл бұрын

good vid u sound like gru no offense

@espacetech 2 жыл бұрын

There is software for sandal shoes

@samuelallen6494 2 жыл бұрын

Blender the everything app

@michaelroby8389 2 жыл бұрын

Sounds like he was reading from the back of the box.

@WalterMahar 2 жыл бұрын

Do you know how frustrating it was to look at and read through all those links on the right and nothing has any reference to what you’re talking about in the video including clicking on the blog post and looking through your blog posts.. nothing on that page either.