What A Rookie MISTAKE!! | HVAC Life
Рет қаралды 207,540
Күн бұрын- SUPPORT THE CHANNEL -
www.patreon.co...
- Check out @TruTech Tools, LTD -
www.trutechtoo... (Use promo code “QUALITYHVAC” to save 8%)
- HVAC TACTICAL -
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%!)
- FOLLOW ME -
Instagram: @qualityhvacr
- BUSINESS INQUIRES -
qualityhvacrtn@gmail.com
- TOOLS I USE -
Fieldpiece SC440 Meter: www.trutechtoo...
Fieldpiece SM380V Digital Manifold: www.trutechtoo...
Veto ProPac Tech MCT Tool Bag: www.trutechtoo...
Supco Magnetic Umbrella: www.trutechtoo...
Solderweld HVAC Brazing Pack: www.trutechtoo...
Solderweld Hot Block Putty: www.trutechtoo...
Navac 2cfm Battery Operated Vacuum Pump: www.trutechtoo...
Cordless-Vacuum-Pump-2CFM?affid=38
Accutools BluVac Micron Gauge: www.trutechtoo...
Accutools TruBlu Evacuation Kit: www.trutechtoo...
Veto ProPac LC Tool Bag: www.trutechtoo...
Veto ProPac MC Tool Bag: www.trutechtoo...
MeasureQuick App: www.measurequi...
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtoo...
Fieldpiece Job Link Pressure Probe: www.trutechtoo...
Appion 1/2" Hose: www.trutechtoo...
Appion 3/8" Hose: www.trutechtoo...
AccuTools Core Removal Tool: www.trutechtoo...
Malco Sheet Metal Snips (Left Cut): www.trutechtoo...
Malco Sheet Metal Snips (Right Cut): www.trutechtoo...
Malco Sheet Metal Snips (Bulldogs): www.trutechtoo...
Malco Sheet Metal Snips: www.trutechtoo...
Malco Turbo Shear Cutter: www.trutechtoo...
Malco Sheet Metal Hole Cutter: www.trutechtoo...
Malco Flex Duct Cutter: www.trutechtoo...
Malco Panduit Gun: www.trutechtoo...
Malco Sheet Metal Hammer: www.trutechtoo...
Malco Turbo Crimper: www.trutechtoo...
Malco Sheet Metal Pipe Crimper: www.trutechtoo...
Malco Reversible Hex Driver: www.trutechtoo...
Malco 24" hand bender: www.trutechtoo...
In this video I finish up installing this 18k btu/h Mitsubishi ductless heat pump unit for a bonus room. Just needed to pull a vacuum, run the power wires, and start it up. Hope you enjoy!
#hvac #ductless #mitsubishi
@QualityHVACR 3 жыл бұрын
What did you guys think about that ending?? :) Trying something new...
@zacharywilliams9647 3 жыл бұрын
I think you should include more bloopers at the end of your videos, it was pretty funny!! 🤣
@b-2466 3 жыл бұрын
Bloopers are always funny.
@edgarcarbajal5892 3 жыл бұрын
That’s pretty cool. I haven’t seen it done. Thanks for all the vids, You’ve encouraged me on getting my C20 out here in California.
@danielarcila3834 3 жыл бұрын
After a job well done, the humor at the end was a plus.
@hkhsm359 3 жыл бұрын
It's very cool.. please keep posting.
@bradyadams1370 3 жыл бұрын
I wanted to cry seeing those packouts so well organized, a thing of beauty! Great Video!
@beentheredonethatoriginals5673 3 жыл бұрын
Mine looked that way for about 10 minutes 15 years ago!
@murkyturkey5238 2 жыл бұрын
@@beentheredonethatoriginals5673 lmao
@yuhyuh6775 3 жыл бұрын
This guys KZfaq makes HVAC seem so easy and stress free 😂 clean work
@mepadda 3 жыл бұрын
kzfaq.info/get/bejne/kLiWdKiQx9rdcZc.html
@5822huron 3 жыл бұрын
It can be. He also works for himself which is peaceful. No one is rushing him. He is his only pressure.
@ancientpersianempire 3 жыл бұрын
@@5822huron facts! the days of some money hungry owner blowing up your phone asking why are you not off to the next job are over. "time served"
@claytonjones3509 3 жыл бұрын
I can assure you it’s hard work! Under houses! Roof jobs and attics! Ductwork and all! I’m 3 1/2 months in helping a HVAC Tech and learning! Installs can get pretty rough! The outside condenser unit is the best part! A/H are the worst in my opinion
@allykatt940 3 жыл бұрын
we all know that it dont really go that way.
@caseyjantz572 3 жыл бұрын
I have a huge appreciation for you putting connectors on the wiring and not just jamming the wires into the terminals.
@gamewizardks 3 жыл бұрын
I just want to add, not all HVAC jobs or environments are this clean and carefree. Great job.
@khw71471 Жыл бұрын
They can be. Great direction to strive for...
@fixitallpaul4847 7 ай бұрын
You dont mean hot dirty dusty attic duct install.
@williamlongo4819 3 жыл бұрын
Nice to see that another tradesman is taking advantage of the technology that we have today to properly pull a vacuum.
@mepadda 3 жыл бұрын
kzfaq.info/get/bejne/kLiWdKiQx9rdcZc.html
@pcakes1878 3 жыл бұрын
large diameter hose is not a new concept just saying
@mauricioramirez3012 2 жыл бұрын
@@pcakes1878 your’e that guy…..
@patrogers8912 3 жыл бұрын
Wow, never seen someone so organized with such neat and clean tools, is this a youtube thing
@seanwatson7191 3 жыл бұрын
Its called efficiency helps knowing exactly were everything is and that will work when needed
@teddycarter2618 3 жыл бұрын
No, you should see the work van of the tech who trained me..
@octaviomartinez7535 3 жыл бұрын
It's like real life home Depot videos 🤣
@dylanwood7810 3 жыл бұрын
I'd love to work for this man, and learn from him
@tommy2buttz668 3 жыл бұрын
He's the Walter white of hvac
@longjohn8672 3 жыл бұрын
@@tommy2buttz668 lmao 🤣😂😆
@clevc112 3 жыл бұрын
Me too.
@permos47 3 жыл бұрын
So I'm watching this and my wife yells from the other room. "Are you watching 70's porn"? 🤣🤣🤣🤣🤣
@godzillasauris 3 жыл бұрын
😂
@johndabek58 3 жыл бұрын
Mine too LOL
@jamram9924 3 жыл бұрын
Is that what it sounded like?
@F.Castle 3 жыл бұрын
@@jamram9924 probably the music kind of lol
@thomasrouse4840 3 жыл бұрын
Lol
@morganmeyer5917 Жыл бұрын
I grew up around this trade as my Dad is a HVACR Mechanic, formerly worked for TRANE Comercial and Industrial, but had his own business installing residential units. Huge nostalgia watching this video and seeing the TRANE and Mitsubishi badges.
@robertoflores4872 3 жыл бұрын
Bro I'm attending school right now for hvac and your job is so impeccable
@sgt.mikebaran7105 3 жыл бұрын
Keep Studying
@coldfinger459sub0 3 жыл бұрын
For your vacuum pump , on eBay or Amazon you can get a adapter to use a 12 amp Milwaukee battery so you are sure to never run out of battery or leave it on an extra long time when needed.
@5822huron 3 жыл бұрын
Exactly
@sihnhold8249 3 жыл бұрын
Can you use one of the lower amp 18 volt batteries? Those 12 amp batteries are expensive.
@5822huron 3 жыл бұрын
@@sihnhold8249 They make an adapter on Amazon.
@coldfinger459sub0 3 жыл бұрын
@@sihnhold8249 Of course do unit comes with a five amp hour battery. 12 AM it’s just a suggestion for that added security of not running out a battery in the middle of the job. We’re having the ability to go longer between having to recharge your battery if you have a Lotta jobs every day . Just a vary nice option And you can make your own using a older dead battery and just buy individual lithium ion battery cells and wire it up yourself it’s very simple gradeschool level project.
@jimmyp5487 3 жыл бұрын
Forgetting the surge protector is the rookie mistake? Click bait. Install looks pretty though good job 🤘🤘🇺🇸🇺🇸
@Antoniohero1 3 жыл бұрын
Not sure if he did but you should always let the system seat for a while after a vacuum, and watch the gage. Sometimes the pressure will go up do to moisture in the system or a leak. Is easier to detect a leak if the system is pressurized with Nitrogen to about 100psi. Let it seat for a while. Vacuum again and check pressure. He is a very neat worker.
@joemarino9268 3 жыл бұрын
Dude you're so organized, it's awesome! No other way to be!
@alexozorio8090 3 жыл бұрын
When I go to jobs and everything in my work truck top to bottom is organized I notice I have a clear head going into the day ahead
@bretwalley4673 2 жыл бұрын
when I started diving over 30 years ago, a buddy told me to watch out for the divers with all new dive gear.
@AF-O6 11 ай бұрын
I appreciate the neat, clean, organized work with a high lever of craftsmanship. I’ve had the worst luck with plumbing and HVAC contractors destroying beams, columns, joists, etc., and doing sloppy electrical. Whatever you charge, you are worth it.
@DavidHernandez-gt9bo 3 жыл бұрын
Once again very clean job ! Love all the great tools you pull out just makes the job go so much smoother! I notice you do all your own electrical work and be man show is right ! Keep up the
@DavidHernandez-gt9bo 3 жыл бұрын
Sorry for the typo ... keep up the good work another satisfied customer!
@bryangonzalez899 2 жыл бұрын
im 23 yrs old just passed my EPA exam today. love your videos !
@edwardwood6127 Жыл бұрын
very neat trick to tape the end of the two wires before feeding them through the conduit. much appreciated
@markcaldwell1245 3 жыл бұрын
I am like everyone else kept waiting to see the rookie mistake and nothing but clean tight work. Great job and I do get your point about forgetting something on your parts list for the job that day.
@Silky_boi 3 жыл бұрын
I thought the rookie mistake was placing the unit next to a DRYER VENT EXHAUST!!!
@OcRefrig 3 жыл бұрын
Yea, That’s Never a Good idea and should be avoided at all cost. They Plug up Condensers something terrible. Preferably no closer than 10’ to a Dryer exhaust.
@JDT738126 3 жыл бұрын
Been there done that, sometimes its tough if theres not many places to place the unit
@BYENZER 3 жыл бұрын
At least that D-vent was high. I had one blow right at the unit. I vent 90'd it away. HUGE difference. Before, the unit ice'd up FAST, then early drop into defrost! Beware D-vents!
@jjyemg2397 3 жыл бұрын
Blocking the crawl space vent?
@brettwing737 3 жыл бұрын
That's a crawl space vent guy!
@jwchicano Жыл бұрын
These inverter mini splits are a marvel of engineering. They cool better than almost every system available when installed correctly. Problem is too many people take short cuts and they're a pain to work on after Theyre installed. Nice video
@mubaddagammoh4912 10 ай бұрын
Until the coil start leaking and Mitsubishi gives u a coil to replace they are pain only the wall mount , ceiling cassettes are way easier
@TedCookHVAC 3 жыл бұрын
Great looking work in my opinion Zack ..... also, your production skills/techniques are superb !! An out-take or "blooper" at the end is a good idea too... the viewers like a little bit of personal touch from time to time.
@QualityHVACR 3 жыл бұрын
Thank you!!
@jonathanlantin247 Жыл бұрын
It helps having all the right tools. I spent the first 5 yrs doing Hvac with limited tools.
@treynewawlins504 2 жыл бұрын
Say bruh you the goat man I love these videos how professional and neat your work is. That lil vacuum was neat
@radhakrishnanmuthusundaram7435 3 жыл бұрын
Quality work. Have all the proper tools, all the parts needed. 👍👍👍
@deoranferguson5657 3 жыл бұрын
As a hvac tech man!! that's a clean job 😎. I'll subscribe because of this
@sgt.mikebaran7105 3 жыл бұрын
You Are A Tech ?? 😂😂😂😂
@deoranferguson5657 3 жыл бұрын
@@sgt.mikebaran7105 yes sir and proud of it
@sgt.mikebaran7105 3 жыл бұрын
@@deoranferguson5657 So You Do Realize This Is A Joke Video Right?...
@esaumel 3 жыл бұрын
I do install and im messy as hell lol this guy is really good, clean, organized
@phonegarage6751 3 жыл бұрын
one of the best trades channels out there. keep up the hard work man!!
@Workharderthanyou 3 жыл бұрын
EMT over Cantex or Sealtite all day long. It will rust about the same time the guy complaining gets a life🤣. The dryer vent is on the side of the coil and fan will blow that lint away , its not on coil side. Their will be as much lint on the coil as calls the guy complaining will catch in his lifetime. 😆. Anyone else Thats criticized this install please post pictures of yours💁♂️. This gentleman is taking a risk videotaping his installs. And its risk takers that built this country and will continue to educate the youth. Exceptional Install in any Masters book. Good job. 🤜🤛
@davidtyndall9604 3 жыл бұрын
It seems that everyone has missed the fact that the AC unit appears to be installed under a "dryer" vent. If you think dog hair is a problem wait until the coil gets clogged with dryer lint.
@pcakes1878 3 жыл бұрын
thats job securoty david😅
@SoutheastTx 3 жыл бұрын
Seen plenty of those pain in the ass to clean sometimes.
@jeramymann5397 3 жыл бұрын
I like people that are willing to show the mistakes. Very funny!! America loves bloopers. Great work. Very clean. You do awesome work
@TheTrustyTradesman 3 жыл бұрын
Man, you work so clean.
@cozyairhvac9676 2 жыл бұрын
Awesome video. Your work is clean and super neat. Seeing how organized you are is truly inspiring. I pick up on so much and it builds my confidence in running my own show. Keep up the great work you are a blessing to the trade!
@gabe4179 Жыл бұрын
Best videos, just straight forward minus the talking and bs. I appreciate this!!
@joep1808 3 жыл бұрын
great job man! very systematic! love the attention to detail. I have never considered HVAC as a career being an MET, but this is very convincing. I like that you have everything on hand, no trips to pickup stuff that takes time away from the job.
@louietheboilerman 3 жыл бұрын
I love the passion that you have on your videos, there's nothing better that do what you love... Louie the Boiler man.. Wepaa...
@EthanMatlack 3 жыл бұрын
Don’t forget to put a box offset on that EMT next time! A little bit neater. Also since it’s outside, pvc conduit is probably the better move. Super easy to bend with a heat gun, or just buy the 90s.
@snacksthatsmileback8172 3 жыл бұрын
Yes to the offset no to the pvc. Pvc belongs in the ground
@donaldearle2803 2 жыл бұрын
@@snacksthatsmileback8172 we have to use pvc for weather protection and because of corrosion outside
@snacksthatsmileback8172 2 жыл бұрын
@@donaldearle2803 what’s wrong with EMT?
@Alex-jo2oi 2 жыл бұрын
@@snacksthatsmileback8172 It corrodes after a few years no? I'm sure where he is there's not much salt though lol.
@Kevin-ip8uf 2 жыл бұрын
first off, I am not criticizing your work because it looks amazing. But I took the route from being an electrician and then going into HVAC, so I might suggest a box offset at the panel side of your EMT. keeps it all flat against the wall until that cute little offset going in at the panel. Just makes for a better overall presentation. first time I've ever been able to make a helpful suggestion because your work is top notch in everything I've seen so far.
@jesseruiz9257 3 жыл бұрын
Love your quality work. Probably the best on most of the HVAC videos I’ve seen.
@QualityHVACR 3 жыл бұрын
Thank you! 🙏🏽
@jasonstarr6419 2 жыл бұрын
Liked the ending. Never heard the dog (don't know whether getting hard of hearing as I age is a bonus or deficit). Saw another comment about how organized you have everything.. i've been trying to achieve that for over 50 years, but since i do just about everything except HVAC, I have so many tools, types of tools, and peripheral supplies, it's just a matter of basic box for each tool, then large totes for all the supplies (smh). Great job. Looks like it was done by a consummate professional ... who also happens to be human and forgot the surge protector (which I likely wouldn't have thought of anyway).
@uxwbill 2 жыл бұрын
Here I was thinking that it was going to be something really annoying, like leaving a valve core out, forgetting to wire up the indoor unit or something equally silly. A surge protector seems like an easy thing to overlook and harmless by compare... The bloopers just help to reinforce the notion that we're all human and the world isn't the perfect place that videos sometimes make it out to be!
@richkanka6060 3 жыл бұрын
Work in the field 41 years, never had the power source within 10 feet of the unit. Plus emts isn't allowed for outside electrical Local code calls for rigid or sched 80 PVC.
@isidroflores5092 3 жыл бұрын
For what's state is that code?
@brettwing737 3 жыл бұрын
In colorado emt is totally acceptable for outdoor usage. I think pvc looks horrible and after a few years in the sun usually looks like spaghetti
@garbo8962 3 жыл бұрын
In my area always used EMT outside. Never used PVC. Too much problem with sagging even if you use expansion joints.
@TR-ut3yh 3 жыл бұрын
EMT is listed in the NEC for outdoor use. PVC is much better though, you have to clip it every 2-3 feet if you dont want it to warp. I live in the Northeast and it is very rare the was panels on the exterior of the house
@brettwing737 3 жыл бұрын
@@TR-ut3yh Its dry here I Colorado emt will last forever here.
@robertbannon9340 3 жыл бұрын
The definition of a "Skilled Tradesmen"...............
@mannys9130 3 жыл бұрын
Amazing work! My heart sank when I saw that dryer vent right next to the unit though. :(
@vincencdekaj699 3 жыл бұрын
nice and net job but i have three suggestions for you put the box offset by the panel, for outdoors use aluminum or plastic pvc pipe , all the time put a disconnect switch for each compressor and if you want to go extra put an gfi outlet by the compressors so you have all the time power to service it , great job
@djdalite 3 жыл бұрын
I want to hire you just for your organization and clean work. This is what a real pro looks like. That system looks so nice
@wd8557 3 жыл бұрын
Spending money on tools, will make a job a lot cleaner and faster and cheaper in the long run. Copper tube bender, hydraulic expander etc. Every install I do get's a surge protector period. Good job.
@hershalgroundjr585 2 жыл бұрын
Nice Milwaukee Tools it just makes you the way easier love tools
@CHINAIRSOFT 3 жыл бұрын
Great videos Zack. Just found your channel that's quality hvac work.
@DownSouth_CoolingHeating 3 жыл бұрын
Emt is used all the time in commercial application in Htown. It will rust but the unit will due for replacement by then. Sometimes location is what it is. Nice job!
@blakeholder1017 2 жыл бұрын
Every aspect of the work you did looks very clean, professional, and very quality! Nice job!
@LongTrout 2 жыл бұрын
Nice electrical for an HVAC guy.....Love the equipment....Just got my appion 1/2 hose and core extractor....Made a big difference for me.
@The714Formula 2 жыл бұрын
Just ran into your content. Loved how clean and organized you have your tool set up. Looking forward in seen your content now that I’m jumping to this field.
@PawsumGaming Жыл бұрын
I love how easy those mitsubishi systems are to install.. we installed a number of those this summer.
@habibhoward7159 2 жыл бұрын
I wish installs go this easy im usually cursing at my helper for something he didnt even know 😂
@jjreal9910 2 жыл бұрын
I like your attention to details, a nice clean install.
@maness2112 3 жыл бұрын
That vacuum pump is cute.
@charmedlife6933 2 жыл бұрын
Pleasure to see you work. Professionally done.
@matthewforestieri6895 3 жыл бұрын
Thanks for the video. Do you ever wonder about breaking a vacuum with the micron gauge attached? I typically isolate the guage with an additional valve core tool but your process was very smooth.
@jonathanlamb4373 3 жыл бұрын
Bro I listen to this beat all the time at home. So relaxing
@Jmxine 3 жыл бұрын
What’s it called?
@robalexander7348 Жыл бұрын
A nice neat tidy job Zac, with nice sharp camera recordings, i enjoy watching your A/C installations here in Australia 👍
@soydelrancho Жыл бұрын
Always install the screws for clips of the EMT at them bottom of the pipe
@raytorres9610 2 жыл бұрын
Good job ! VERY CLEAN
@georgelara9615 3 жыл бұрын
I like that service wrench
@jonmorford9595 2 жыл бұрын
Maybe add another slim duct elbow and make sure to foam the end so insects and rodents cant crawl up. Nice work either way!!! God bless!
@clevc112 3 жыл бұрын
In school at the Dickson TCAT right now on my 2nd trimester. Already have my universal certification and HVAC Excellence Certification. Can't wait to find a good company to work for.
@hvacrzone5390 3 жыл бұрын
Love your equipment every things perfectly placed and organized leading u to be safe productive precise & time well managed ! Awesome man!!👍🏽
@bill944 3 жыл бұрын
If your "rookie" mistake was forgetting the surge protector, you don't have anything to worry about. I do things like that occasionally on purpose just to prove to myself that I'm still human! LOL
@gersonreyes2471 3 жыл бұрын
Your work and tools are so on point. You inspire me to take pride on what I do.
@rapidfire4528 3 жыл бұрын
Cleanest HVAC tech I’ve ever seen didn’t even break a sweat 😓
@MrJayfout 11 ай бұрын
Looks clean, good job!
@eklew1 3 жыл бұрын
A very nicely done job, best regards from a Swedish heat pump technician.
@Regii_HVAC 3 жыл бұрын
Very nice install man. Very graceful, beautiful conduit work, even took the time to crimp the little stacons on the high voltage
@conrradoalbarran-hernandez2826 3 жыл бұрын
Makes it look easy! Work of art man!
@mushipc 2 жыл бұрын
Neat and clean work. I see Milwaukee everything had to look and wonder if the made a truck
@billysimmons2432 3 жыл бұрын
would have been cool to see your 24 hour pressure test and vac to mitsubishi spec. looks like just one vac and go.
@ernestgalvan9037 3 жыл бұрын
Good video, good camera angles, good lighting, good editing, good voice quality. So WHY THE CLICK-BAIT?
@MichaelHernandez-lc2wb 2 жыл бұрын
You make it look so easy
@YourActualMother 3 жыл бұрын
best HVACR content on KZfaq by miles!
@brokedrifter7311 3 жыл бұрын
That cordless vacuum pump is sick. I need one
@ghleader2179 3 жыл бұрын
This vacuum pump is very impresive..
@sgt.mikebaran7105 3 жыл бұрын
😂😂😂🤪
@jamesmcintyre9985 3 жыл бұрын
EMT Outdoors? That homeowner will really appreciate the rust stains on their masonry in a few years...
@davidtyndall9604 3 жыл бұрын
I personally agree with you but I do think that in some states EMT is legal to run out doors. I was trained to never install a single hole strap with the screw on the "top" of the pipe. It is much less prone to giving away if the screw/anchor is on the underside of the pipe.
@originalkhawk 3 жыл бұрын
this!
@hepparade 3 жыл бұрын
Aluminum and galvi EMT does exist
@davidboltwood6917 3 жыл бұрын
Thats what would normally be used in so cal galvanized not iron.
@dattzy2985 2 жыл бұрын
8:11- for those of you that missed it, that's the classic, lets flip this breaker on and see if its a light show step back
@pipeboy98 3 жыл бұрын
good job. Ill give you a hot tip for that navac vacuum pump. they use makita batteries. but i see that you have all milwaukee tools so buy an adapter plate that goes from makita to milwaukee. A 9AH milwaukee battery will run that pump for close to 2 hours uninterupted.
@pipeboy98 3 жыл бұрын
www.amazon.com/FirstPower-Battery-Adapter-Lithium-ion-Milwaukee/dp/B07MF2VJMT/ref=sr_1_5?crid=3M411KTZRUUPD&dchild=1&keywords=makita+to+milwaukee+battery+adapter&qid=1621916712&sprefix=makita+to+%2Caps%2C291&sr=8-5 here is the one I use...enjoy!
@charlieromeo7663 2 жыл бұрын
Nice work. I may have used PVC conduit (the power risers are) unless it’s not per local code. I installed one last week for a buddy. When he saw the micron gauge, he said he’d never seen another buddy of his, who’s a licensed HVAC contractor, use one. Scary what and who’s doing this work below standards.
@buildingsolutions2874 3 жыл бұрын
Nice install and tool kit 👍
@BurntLemmons Жыл бұрын
I could be wrong. But I thought on mini split systems you can’t get a true superheat reading on the suction line where you had your clamp at. I was always under the impression you needed to take the thing apart and get a reading at the compressor.
@zipperdingo6385 3 жыл бұрын
Your tools are woooooooooooooooooooow, and you are organized to the max
@debbiemoorin1748 2 жыл бұрын
In MICHIGAN that electrical would not pass code. It should be 4 wire. The metal conduit will pass code however it will start to rust from being outside. Plastic pipe would pass code however it will never rust.
@brocklagunas3055 3 жыл бұрын
Hahaha! The blooper reel at the end was awesome!! Keep them coming brother!
@enduromill1815 5 ай бұрын
Wish my tools and gear were that new and organised 😂
@markbaker5366 3 жыл бұрын
I’m admiring your tools and very organized…
@pelon542 3 жыл бұрын
your work quality is top notch,very well done once again
@Heavy_metal_rulez 3 жыл бұрын
In my 7 years of doing hvac i dont think i have ever put a surge protector on anything. I dont think I've even seen any here at all now that i think about it.
@ThePeavey23 3 жыл бұрын
Because it’s a joke... just like his battery operated vac pump!!
@bikerbobcat 3 жыл бұрын
It's a "recommended item" (upsell) for the company I work for.
@onenikkione 3 жыл бұрын
If it will protect the unit why not install one
@brandonrutt2898 3 жыл бұрын
@@ThePeavey23 I actually think those navacs are pretty slick. Not for every application but imagine needing to pull a vacuum on a ductless unit on the roof of an office building. That would be sweet.
@clintmullins4406 3 жыл бұрын
@@brandonrutt2898 all of my ac’s are roof mounts. 1.5-2.5 tons. Sometimes the line sets go down 3 floors. I wish I could lug that little guy up there. Currently use the yellow jacket bullet or the bigger 8 cfm.
@michaelrasmussen426 3 жыл бұрын
That's the smallest vacuum pump I have ever seen. I've been in hvac field since 05. Does it do a good job getting the microns down?
@sprockkets 2 жыл бұрын
Yep. The hose he used and removing the schrader valve is the key.
@murkyturkey5238 2 жыл бұрын
@@sprockkets what about a larger unit?
@murkyturkey5238 2 жыл бұрын
@@sprockkets longer line set I mean
@sprockkets 2 жыл бұрын
@@murkyturkey5238 See for yourself. kzfaq.info/get/bejne/sLmqYJqgu563k5s.html
@jonahlowe7649 2 жыл бұрын
I'd worry about it maybe over heating on a big unit then again all my bosses vacuum pumps get put away hot so maybe it doesn't matter
@markcampbell4576 3 жыл бұрын
The outtakes at the end 🤣🤣🤣, cool job bro 👌👌👌
@lesupernick21 3 жыл бұрын
Using EMT/raintight outside when i’m from they rust fall apart in 2 years...
@ancientpersianempire 3 жыл бұрын
much more work also, get some pvc and install super fast. still looks good tho
@on-site4094 3 жыл бұрын
All the tools are new and fresh off the shelf
AC Service Tech LLC
Рет қаралды 114 М.