What is a Pipefitting Takeoff? | Pipefitting Basics

  Рет қаралды 172,171

WeldTube

WeldTube

Күн бұрын

Here is another video in our pipe-fitting series with David Ciriza. Today he shows us what takeoffs are, how to calculate them and how it plays into the world of pipe welding and fitting. With over 15 years of pipefitting and welding experience and a Certified Welding Inspector to boot he knows what it takes to succeed.
#WeldTube #southcoastweldingacademy #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en

Пікірлер: 134
@weldtube
@weldtube Жыл бұрын
👇WeldTube Store👇 www.weldlife.com
@ChandanKumar-bn1kh
@ChandanKumar-bn1kh 11 ай бұрын
Please send me Elbow and reducer center chat copy please
@ChandanKumar-bn1kh
@ChandanKumar-bn1kh 11 ай бұрын
Please send me Elbow and reducer maiter cutbak thiuri chat please
@MdArifulislam-yj2vb
@MdArifulislam-yj2vb 2 ай бұрын
০0]​@@ChandanKumar-bn1kh😅😅
@OchoaTheVocalist
@OchoaTheVocalist 2 жыл бұрын
Just a little tip for you guys. If you do that method of cutting the pipe size in half 4 times, but take it a step further, and cut it for a 5th time. So in the case 6" being the pipe size. Do 6, 3, 1½, ¾, and then ⅜ being last. Take the 3rd and 5th numbers and add them. So 1½ + ⅜ = 1⅞, that will be the center of your 22.5° fitting. Hope this helps.
@huntermay2282
@huntermay2282 Жыл бұрын
Thanks man
@waltoglesby3936
@waltoglesby3936 Жыл бұрын
Fuck yes dude. Thank you.
@levirodgers4087
@levirodgers4087 10 ай бұрын
Damn i wish I saw this back in school the instructor did explain it in simple terms he just read the book and didn't really teach.
@ModestVejar
@ModestVejar 2 жыл бұрын
The blue book has helped a lot when I was new to piping
@Ruben901
@Ruben901 2 жыл бұрын
I learned all this from a pipe Welder and fitter named Frank, the guy taught me alot and i am grateful I met the guy.
@MrPePeLePuo
@MrPePeLePuo 2 жыл бұрын
Loving these pipefitting videos
@nirmalsurendranmenon7049
@nirmalsurendranmenon7049 2 жыл бұрын
Great Explanation Mr. David 👍
@damtb0i800
@damtb0i800 2 жыл бұрын
Iam a millwright by trade for about 16 years now but that doggie you got some major skills 👌 millwrights and pipefitters work together for pipestress and all, but were still the doctors of the trade. But i enjoy your videos keep it up big dawgy
@1012Mrjesse
@1012Mrjesse 2 жыл бұрын
The way I learned in school is that the distance for a long radius is 1.5x the diameter, it gives the same results, so 6*1.5= 9
@johnjacobjingle8302
@johnjacobjingle8302 2 жыл бұрын
Just make sure it's a long radius 90 first.
@andrewstephens2311
@andrewstephens2311 5 ай бұрын
And 5/8 × the diameter for the 45
@marioditkun2905
@marioditkun2905 29 күн бұрын
Thet depends what tipe of elbow you have. You can have 1D. 3D. Standard is 1.5D
@tomc4304
@tomc4304 Жыл бұрын
Thank-you David that was very informative
@delberth.atcitty9141
@delberth.atcitty9141 2 жыл бұрын
One of the best videos about take offs I've seen. Great job guys!!
@andyruiz2577
@andyruiz2577 Жыл бұрын
Helpful and easy to learn 👍
@jared7723
@jared7723 2 жыл бұрын
Easy clear to understand, essay nice video
@edirinokpkpi2581
@edirinokpkpi2581 2 жыл бұрын
Thank you for this video.
@jefferythornton1783
@jefferythornton1783 2 жыл бұрын
Now I can take what u taught me to work in the morning tks!!!
@carterfenwick7880
@carterfenwick7880 2 ай бұрын
only needed first minute, good videos keep it up
@paulgarcia458
@paulgarcia458 2 жыл бұрын
Good job young man,
@Kevin-is-here
@Kevin-is-here 2 жыл бұрын
Thanks for the info 👍
@bris9984
@bris9984 Жыл бұрын
Welll explain learned something new today keep up the content.
@tanahiry8306
@tanahiry8306 6 ай бұрын
Thank you for sharing
@joeboyle8987
@joeboyle8987 2 жыл бұрын
Nominal pipe diameter times .625 or 5/8 for 45’s, subtract that from your overall center to center or center to end measurements plus your weld gaps. Boom, cut piece length figured out
@kotlblbland
@kotlblbland 2 жыл бұрын
Thats one way.
@b_lo36hunnit
@b_lo36hunnit 2 жыл бұрын
Im a 1st period plumbing apprentice but also learning to fit ive been trying to get better at takeoffs this video definitely helped me see it better . thanks for the video!
@JC-un4bg
@JC-un4bg Жыл бұрын
This is how you would say it half the degrees in bend x the radius
@wantutri7225
@wantutri7225 2 жыл бұрын
Flawless demonstration 🤙🏽
@Ruben901
@Ruben901 2 жыл бұрын
Your profile pic is an alien holding a gold ak?
@wantutri7225
@wantutri7225 2 жыл бұрын
@@Ruben901 no
@luisacevedo3349
@luisacevedo3349 Жыл бұрын
Gracias bro for your information
@jayanathjayawardana6428
@jayanathjayawardana6428 2 жыл бұрын
Good job
@OavaldoCruzBatistaDazz-bb3kr
@OavaldoCruzBatistaDazz-bb3kr 11 ай бұрын
Very useful
@Mrnickking
@Mrnickking 2 жыл бұрын
Good to see this channel hasn't gone corporate like some other channel
@phrodendekia
@phrodendekia 2 жыл бұрын
Muy buena explicación!
@kingdavid9574
@kingdavid9574 2 жыл бұрын
Good refresher video. ,thanks
@charron9012
@charron9012 2 жыл бұрын
Thanks bro!
@EarlyBirdMedia34
@EarlyBirdMedia34 Жыл бұрын
Love this
@lifeinthearclane6240
@lifeinthearclane6240 2 жыл бұрын
Had a weld test today, and a written one as well, and what you just showed is exactly what I failed lol, I didn't kno about that stuff but I do now. Can you show more, but the test was for sanitary tubing SS
@weldtube
@weldtube 2 жыл бұрын
You’ll get em next time champ!
@lifeinthearclane6240
@lifeinthearclane6240 2 жыл бұрын
@@weldtube thanks brother
@dominickcarbonara5494
@dominickcarbonara5494 2 жыл бұрын
U can order a fitter book online,u can download apps from the fitting manufacturers, and u can measure the fittings. I will say and I am not at all trying to be mean but u should definitely know know this stuff and hangers if u weld pipe. Generally u fit before u weld. U can practice with pvc, cpvc etc too. If u are a pipe welder and u don’t have this knowledge you will stick out like a sore thumb.
@dominickcarbonara5494
@dominickcarbonara5494 2 жыл бұрын
Great vid u definitely should do fitting 101. 2 hole flanges, gaskets, valves, HANGERS, socket fittings, thread pipe, glue pipe, solder, braze, if there are guys not knowing a take off and they are welding pipe they at least should get a rundown. It may help a pre apprentice too.
@lifeinthearclane6240
@lifeinthearclane6240 2 жыл бұрын
@@dominickcarbonara5494 yea I told the company ahead of time ive never welded pipe as far as out in the field, I just told the company that I could pass a 6G which I have, all 3 ive taken the CWI said i passed with no indications, but they wanted me to take the sanitary welding test plus a written test, I passed the weld test but failed the written and told them I would, but the owner said the other stuff can be taught on the job training. So idk ill see. But thanks for the information! I will definitely order the stuff he recommended.
@madrad3
@madrad3 2 жыл бұрын
More of these
@aliabdulkadhumali243
@aliabdulkadhumali243 Жыл бұрын
thank u
@donaldlykins4548
@donaldlykins4548 2 жыл бұрын
This is a good ass video!
@lightbearer.94
@lightbearer.94 2 жыл бұрын
my dream job pipe welding is badass hope to get in that field someday
@privatejustice4704
@privatejustice4704 Ай бұрын
Don't do it. Go to college and get an engineering degree. Welders and fitters get fucked in the field being required to make shit happen in the real world that engineering text books don't work.
@lightbearer.94
@lightbearer.94 Ай бұрын
@@privatejustice4704 haha im doing structural currently both in shop & in the field so i know what you mean.. i was learning & practicing my 6g back in 2012 after high school in California. my uncles are boilermakers & do a lot of power plant shutdowns/outages.. they were taking me to work showing me everything but the Company cut back on man power so i ended up moving back home to Arizona. since then i just been doing a lot of structural fabrication & mine maintenance but still would love the opportunity to try it again.. i come from a family of welders so this is just what i love doing man lol i know ill work my way up there eventually.
@officialvegaentertainment3341
@officialvegaentertainment3341 Жыл бұрын
Awesome video! This video clears up a lot of questions. I’m a top helper atm, but I will be a pipe fitter soon enough!
@imyopped4921
@imyopped4921 2 жыл бұрын
597 journeyman here, 597 has treated me like a family since day one. If you are looking into a trade or something new DO IT, and do it FAST!
@gaudencioboniceli1263
@gaudencioboniceli1263 2 жыл бұрын
Very nice and very informative, where can I buy the pipe fitter blue book, chiko, & Pipe Selector?
@giantoms5130
@giantoms5130 Жыл бұрын
Nice 👏👏👏👍👍👍
@mauriciosaldana6207
@mauriciosaldana6207 Жыл бұрын
Exactly 👌
@pauldafiakpor1530
@pauldafiakpor1530 2 жыл бұрын
I've been an ardent follower of your channel" I've been dreaming of becoming a pipe Fitter, although I've got the opportunity for little practical training but I would want you people to train Me so I can secure a Job over there, I'm a Nigerian and very Quick in Learning, looking forward to hearing from you, thks
@saquibkhan1230
@saquibkhan1230 2 жыл бұрын
Please make video on elbow rolling process for any degree.
@joeboyle8987
@joeboyle8987 2 жыл бұрын
Nominal pipe diameter times 1.5 for 90’s
@club-up
@club-up 2 жыл бұрын
Good job!..😎👍 what about the gasket and weld gap? Do you subtract for that?
@cirizawelding5076
@cirizawelding5076 2 жыл бұрын
Yes sir I do that when I do my math for my pup piece this was just to show what the fitting take off is
@club-up
@club-up 2 жыл бұрын
I understand brother, you've learned well. Keep up the good work. 😎👌 We need people to keep the trade at its best.
@panzerfaust7672
@panzerfaust7672 2 жыл бұрын
@@cirizawelding5076 Good video, nice instruction for new fitters and welders. One constructive thing like this dude says, I know you do but should've mentioned the gap and what not, maybe some new guys won't think twice about that.
@violentstank306
@violentstank306 Жыл бұрын
Long radius 90 is 1.5 x nominal. Shirt radius do 1x nominal. 45 do 5/8 x nominal.
@joelambabama8999
@joelambabama8999 9 ай бұрын
How do you start out getting a pipe welding and fitting job for the oilfield/ oil and gas companies? Do you contract yourself as a welder/fitter or do you have to have a welding rig, do you walk on a refinery and ask? Call big name companies? Go to a welding company and hire on with them? Any thoughts?
@arunbaburaj9489
@arunbaburaj9489 2 жыл бұрын
I think it is the complex method. In order to find the take off in LR 90 nps*1.5 and LR 45 nps* 5/8.
@ricardoroble1421
@ricardoroble1421 2 жыл бұрын
How to avail the blue book sir...because i want to learn more about pipe fitter
@luisricardosousa6478
@luisricardosousa6478 2 жыл бұрын
O conteúdo do canal é muito bom... mas é uma pena que as legendas para PT-BR não sejam fiel ao original.
@mattarnold4071
@mattarnold4071 2 жыл бұрын
👏🏻👏🏻👏🏻
@weldtube
@weldtube 2 жыл бұрын
🙌
@grantrichardson2185
@grantrichardson2185 2 жыл бұрын
I fuckin love this shit.
@ardiemaikol4808
@ardiemaikol4808 2 жыл бұрын
Where can i get the blue book sir...
@hansguerra175
@hansguerra175 2 жыл бұрын
Hola ! subtitulo en español porfavor gracias.saludos ✋🇨🇱
@Scar-ss4zd
@Scar-ss4zd 2 жыл бұрын
To determine the center of a 90 degree bend, simply put 2 pieces next to each other and measure the value from foreign trade until you know the value then by 2 parts e.g. bend DN 100 has from outside to outside 200mm 200: 2 = 100 / 100mm is the outlay of a DN 100 bend DIN not ISO
@bradleyrussell1973
@bradleyrussell1973 2 жыл бұрын
We call em take outs round hea!
@pauldafiakpor1530
@pauldafiakpor1530 2 жыл бұрын
How do I get the pipe Fitter blue book, pipe take off formula book and the chart in Nigeria? Please Help!!!!!!!!!!
@JC-un4bg
@JC-un4bg Жыл бұрын
Tan of half the degrees of the Ben time the rad
@fingaming3826
@fingaming3826 11 ай бұрын
90° polegada x 38.1 45° polegada x 15.9 Raio longo
@jordanthadan7113
@jordanthadan7113 Жыл бұрын
Tan of half the degrees× the radius
@anotidatunamanganye6496
@anotidatunamanganye6496 Жыл бұрын
I think it's better to use a formula which is: Tan Deg/2 x 25,4x1,5x size of pipe. You can apply this formula to any angle weather its short radius or long radius
@mithradinesh5103
@mithradinesh5103 8 ай бұрын
Very good video I need to 3 books please help me
@randyoverturf6460
@randyoverturf6460 2 жыл бұрын
Everything he said was true
@chahatparween986
@chahatparween986 2 жыл бұрын
How to download fitting chart
@edgarsanchez4034
@edgarsanchez4034 2 жыл бұрын
🙋‍♂️👍 hello David from Chuco Town EPT 915
@cirizawelding5076
@cirizawelding5076 2 жыл бұрын
👍
@alexcastor2481
@alexcastor2481 2 жыл бұрын
Puro chuco town
@ayampenyet1082
@ayampenyet1082 2 жыл бұрын
Plis subtitel indonesia
@Dhenz18
@Dhenz18 2 жыл бұрын
hi there..how can i purchase blue book,piping selector wheel and the other one ( the red one)
@weldtube
@weldtube 2 жыл бұрын
Amazon
@seanmanwill2002
@seanmanwill2002 2 жыл бұрын
You can find that blue book at any reputable welding supply.
@Dhenz18
@Dhenz18 2 жыл бұрын
@@seanmanwill2002 Sir even here philippines?
@seanmanwill2002
@seanmanwill2002 2 жыл бұрын
@Dennis. Claveria Lumahan, If you don't have it locally, I'd try Amazon. You won't regret the purchase. That book is a lifesaver!
@Dhenz18
@Dhenz18 2 жыл бұрын
@@seanmanwill2002 thank you sir
@Abshaikh46
@Abshaikh46 2 жыл бұрын
38.1×6
@larryayala8609
@larryayala8609 2 жыл бұрын
Hey can you please please help me with a video how to do a reducer with a pipe please
@cirizawelding5076
@cirizawelding5076 2 жыл бұрын
Are you talking an eccentric reducer or both eccentric and concentric
@romulo1972
@romulo1972 2 жыл бұрын
Sr 6" easy 6x25.4 =152.4 cm
@rogelioroa455
@rogelioroa455 9 ай бұрын
Can you show the formula for a Tee
@Whyyoumadcuz__
@Whyyoumadcuz__ 8 ай бұрын
What if the measurement is 5 and you have to find take off ?
@user-qd2ic5ts2u
@user-qd2ic5ts2u 8 ай бұрын
Its semply formule 38× the inch its the pipe exp 38×2" 38×3" only for 90°
@vladimirtoska7790
@vladimirtoska7790 4 ай бұрын
Mira gringo, todo ese manual que tienes yo lo tengo en la cabeza, si por a o b se pierde, como desarrollas el piping???????
@leacabasag5363
@leacabasag5363 2 жыл бұрын
45°LR Size of pipe multiply by. 625 90°LR Size of pipe multiply by 1.5inch
@michaelholmes8350
@michaelholmes8350 5 ай бұрын
You're gonna piss of some welders putting that together like that😂
@kheyrolahghalavand4826
@kheyrolahghalavand4826 Жыл бұрын
Hello, don't be bored, sorry, do you have a Telegram channel so we can download these movies?
@ivo_7719
@ivo_7719 2 жыл бұрын
In spanish please,subtitles
@SuperBlueMoonWA
@SuperBlueMoonWA 2 жыл бұрын
So you need to measure from center point to center point? Is it not accurate to just measure between the bends after Welding them to each pipe to find the pup length?
@cirizawelding5076
@cirizawelding5076 2 жыл бұрын
Typically most isometric drawings will be shown with measurements center to center or face of flange to center I have run into Shorten and mitered fittings if you measured just the pup you could be off on centers
@SuperBlueMoonWA
@SuperBlueMoonWA 2 жыл бұрын
@@cirizawelding5076 ah gotcha. Thank you.
@chahatparween986
@chahatparween986 2 жыл бұрын
Please tell me in milimitre
@user-ii8hb3sn5e
@user-ii8hb3sn5e Жыл бұрын
Please send me the blue book lm from Greece and lm new at work
@carlosalbertosilva1981
@carlosalbertosilva1981 Жыл бұрын
Bom dia manda um deste para min eu pago e também pago o frete
@Randall_Marsh
@Randall_Marsh 2 жыл бұрын
Weld tube , popquiz… What is the take off for a 3” 45? Tell me how you get your answer?
@leonwoods4052
@leonwoods4052 2 жыл бұрын
1 7/8''
@AR-qj6mc
@AR-qj6mc Жыл бұрын
I been working in Korean company in Saudi Arabia Ang UAE. Every instances we been using millimeters not inches, when you take off the numbers of a length of pipe we use millimeters.. so pls throw your blue books and burn it.. engineers and architecture now a days didn't use that way of inches
@user-jc9le5te5j
@user-jc9le5te5j 2 жыл бұрын
Очень интересно но ни куя не понятно.
@chahatparween986
@chahatparween986 2 жыл бұрын
What name is red card please tell me
@rjmartinez1998
@rjmartinez1998 2 жыл бұрын
Chico's Pipefitter Pocket Cards
@mikeg1871
@mikeg1871 2 жыл бұрын
Miss my blue Bible
@johnjacobjingle8302
@johnjacobjingle8302 2 жыл бұрын
Pipefitters take off is when you are fitting it up.. and ask for a tack.. and your welder tookoff.. tack?!.. tack??.. looks around.. drops the fitting.. takeoff to join the welder..
@trilltex9329
@trilltex9329 Жыл бұрын
If I struggle with math will I struggle with pipefitting? If so what math do I need to practice on
@big_bear6351
@big_bear6351 3 ай бұрын
Just Basic algebra pretty much
@williammolder8372
@williammolder8372 3 ай бұрын
Damn I've been doing this s*** for 50 years!!! They change the size of 90s!!!! That 90 years showing is a standard 90 you ain't as smart as you think you are
@aviewthroughmyeyes8003
@aviewthroughmyeyes8003 2 жыл бұрын
Here is tip. 38mm * 9 =228mm ...38mm is for 90degrees and 16mm is 45degrees. Just incase you lose your book. GOD bless..
@raya472
@raya472 2 жыл бұрын
Almost every welder, fabricator, fitter: Black fingernail Scrapes/ cuts Burns It's like a badge of honor or rite of passage 😀
@user-jf4rk7zc9i
@user-jf4rk7zc9i 2 жыл бұрын
Come on, just switch to milimeters and burn all your blue books!!!!
@evgeniikorolev5167
@evgeniikorolev5167 2 жыл бұрын
i do not understand anything
@maxdoom3521
@maxdoom3521 Ай бұрын
This would be more helpful if someone would even fucking tell me what a take off is. I can calculate shit and do equations all day and it’s meaningless if no one tells me how it relates to the real goddamn world.
How to PIPE-FITTING Basics
25:02
WeldTube
Рет қаралды 887 М.
Calculating a 45 degree offset piping system / Tradestutor
5:25
Tradestutor
Рет қаралды 337 М.
Please be kind🙏
00:34
ISSEI / いっせい
Рет қаралды 43 МЛН
Omega Boy Past 3 #funny #viral #comedy
00:22
CRAZY GREAPA
Рет қаралды 37 МЛН
Basics of Pipe-fitting and Welding | How to Fabricate a Spool
23:45
Pipe fitter Basics. Welded Pipe
22:32
Jacob Schofield
Рет қаралды 22 М.
How to Compute Takeoff, Spool, Center to Center 90, 45 Degrees Elbow Pipefitter
9:05
PipingWeldingNonDestructiveExamination-NDT
Рет қаралды 370 М.
How to Fit and Weld Socket Welds in Various Fixed Positions
15:19
Every Pipe Fitter Must Know This Pipe Fitting Techniques.
5:12
Technical Studies.
Рет қаралды 99 М.
What is GD&T in 10 Minutes
10:09
Straight To The Point Engineering
Рет қаралды 297 М.
Top 3 Must-Know Pipe Fitting Offset Methods (Includes Rolling Offset)
12:15
Тайна голубого озера😱
0:35
FilmBytes
Рет қаралды 9 МЛН
Surely you don’t know this ☕️ #camping #survival #bushcraft #outdoors
0:18
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 6 МЛН
WHO DO I LOVE MOST?
0:22
dednahype
Рет қаралды 27 МЛН
Tall guy live
0:19
DaniloWorkouts
Рет қаралды 26 МЛН
APRENDA operar com mais SEGURANÇA
0:12
Wall Street Invest
Рет қаралды 17 МЛН