Great information. Your channel is truly stepping up the fish keeper educational videos. Love it!

great video and making it more easy and understandable for everyone

Great video. You make everything so understandable.

I love the explanation! You’re cool man! Keep up the good work!!🎉

Great video. Helpful and informative. Thanks for sharing and as always do what you do if it works for you.

Oh snap I just learned something new. I'm about to setup a DIY CO2 for my tanks and this came out. What a coincidence, now I won't have to bother manually turning off the co2. Thank you!!!

Very informative, thanks!

great info again :)

Always educational

20g looking good bro .great video with nice info

Thanks for the info. I'm new to planted tank hobby. I recently purchased a diy co2 kit. News subs here.

Great video

Ha! This is timely! Just when i was searching about CO2 injection and solenoid :)

Thank you. Great info. Wasn't real sure what the heck the solenoid did.

Thanks 🙏

Great video! How hot does the solenoid run typically? I'm thinking of getting one but have seen online reviews stating that some get too hot to touch

One day maybe! That is very cool stuff. I have tried the diy coke bottle method before

Hye, im new in this. So if we turn off the plug, there will be no co2 bubble coming out from the diffuser rite?

I’m using a DIY CO2 (citric acid and baking soda) system with a solenoid. When the solenoid is off at night does pressure build in the bottles? I’d rather not have the bottles exploding 😅

do you have any more videos on DIY CO2 setups? wanting to start one but not sure where to begin. I understand the basics of it, mainly worried about pressure regulation. Don't want my bottles blowing up

Hello, thank you for the information. I have a built in regulator&solenoid. It was working properly previously but now it is working when it is off for a long time. If it is working for let’s say 2 hours if I turn the power off it will continue allowing bubbles. Do you know if I can fix it?

Can I connect the solenoid to any timer, or are there special ones?

I have a stainless cylinder that produces co2 with baking soda and citric acid and it didn't come with a solenoid valve. Can I just shut down the needle valve at night and turn it back on the next day? Will it explode or something? Please help. Thank you

I know this is an old youtube, but one thing lingering in my mind. if we stop co2 from passing through with solenoid, then where the CO2 goes? is it compiled on the bottle, or solenoid does make the excess CO2 out through this solenoid? or if it is compiled on the bottle, then the pressure will be control by safety valve when the pressure reach its max? thank you in advance for answering this, because it is kind of confusing to me

Thanks man good vid, I'm gunna get one for my Fluval Flora tank. I want something to just turn the co2 on and off on its own. It's such a pain to set the Fluval co2 kit regulator by hand every morning. With this valve I'll be able to set the regulator ONCE and let the valve do what it do.

Nice intro yah! You used AE? I had made one for my channel, a year back, tech and gaming, and barely post now :P ByteMeTwo. Btw how is your cabomba doing? :) and few days back I accidently over overdosed on seachem flourish on my 70L tropical and now have so so much hair algae :(. removed some manually and my 11 neo shrimps can't seem to keep up. any advice?

Many people don't know this, but the air pumps for aquariums actually store all the air they need for their life time in a tiny sack within the unit housing and electrical components. /s

can you use an individual solenoid with a paintball tank and non-solenoid regulator, or do you only use the individual solenoid on diy kits because the pressure isnt that great?

Bit late to the video but thank you!

Is the solenoid supposed to be fairly hot to the touch while running?

Are there different sized solenoids for different sized co2 cannisters? Wanted to know before I make a purchase

thank you for explaining what a solenoid is. can you please tell me where I can get that timer that you connect the solenoid to.

Great Video! I have been using this type of solenoid for quite sometime now. Unfortunately for me, I had 3 of them fail to stop the CO2 flow even when turned off. I have tried all trouble shooting procedure to make the solenoid work again but to no success. Have you experienced this kind of problem also?

Great information, but man i feel stupid, i thought it was going on and off by itself as soon as light hits it. Thank you so much for this video. ☺️👊🙏

How do you connect the selenoid to the co2 tubing in the diy. my selenoid could not connect to the tube. it only connects to a co2 regulator. is there a special adaptor to attach it to the tube?

Can you use a standard solenoid on a c02 tank for aquarium. Need some help

Hello ! Is wyin solenoid good to use ? Does it over heat ?

Hi, can i use the pressurized tank without solenoid? If yes how it will work

As always a great video from u- now I have I bit more better understanding of it- unfortunately I can’t watch it live videos due to difference time-

Can you recommend a quality solenoid you would buy? These C02 regulators with built in solenoids range from $75.00-$400.00, not sure how much money I should spend.

Is it ok to use for yeast and sugar co2 system?

Can I use a solenoid like that with a Fluval 45g Co2 kit?

Love your videos, entertaining, and way more informative, but you forgot one detail, or maybe because I'm just 13 and still new to th hobby haha, but what is the difference between a double-headed solenoid and single-headed one?

i have a regulator without a built in solenoid switch - as you alluded to in your final comments. but the question is: how do i go about purchasing a solenoid switch for this regulator.

Does WYIN solenoid have inflow and outflow direction?

Do you have a new link for a co2 solenoid? The one you have isnt available any more.

I have this very stand alone solenoid but when the timer turns off it builds up pressure and blows my line. I even got thicker high end co2 line and it still blows up. What am i doing wrong

I have a question: how exactly does the hose solenoid work with manual systems?.. Doesn't CO2 build up in the hose segment between the valve and cannister, causing the hose to burst?

There is a timer solenoid. There are with on timer,off timer, and combine with both

What are the cons to putting solenoid after bubble counter

what I am wondering is how to figure out what to set a Milwaukee ph controller to so that it turns on the solenoid on the co2 tank every time co2 levels get low.

Gosh i have been looking for this video forever. My problem is that once the solenoid turns off pressure mounts n the tubing pops off. Any recommendations?

Can we get the link if any on were to get this solenoid on Amazon or Ebay thank you

Hi I know it's been a while but can you tell me my solenoid stopped working but stil has pressure on both gauges it's a duel stage regulator so it's just stopped do you think it could be the coil part that has failed thanks for any help

I really need your help with the co2 regulator need to learn from the best i hope one day you come over for BBQ and see my fish room

Hi,can u make a video how to fix a solenoid to the co2 regulator which does not have a solenoid.

Hi the solonoid gets heated up when I on ?

These Wyin solenoid any good? Worth the price?

My solenoid gets hot when. I turn on is it normal

Why can't someone just use the needle valve to shut off/on co2. If I'm not using a timer and having to manually do it anyway, is a solenoid necessary?

Thank you. I'm trying to figure out if I'm even ready to attempt CO2 yet! But I'm getting there! 👍🌱🐟🌿🙏

request on QA about twinstar !, is it really effective or just placebo/snake oil marketing :D

Hi, Great Video, my Solenoid recently just randomly spoiled, I have been using it for less than a month, the led and electrical circuits still function, as the green led is on. However it no longer locks the Co2, it just let's the Co2 through even though off, it's the same design as the one in the video. I have tried unscrewing everything and cleaning it, I tightened it as hard as I can, even harder than it came before, but is still is not working, and I don't want to buy a new one based on the time I duration I have used it. Any ideas what is the cause or how to fix it? I'm just 13, still have a lot to learn haha. Also, have you ever experienced your DIY Co2 bubbles diffused but then doesn't looked dissolve? My diffuser is directly under the filter outlet, but the bubbles often just gets pushed towards the roots of my Salvinia and just stay there. Last question, why does my DIY CO2 lasts so short? I placed in the citric acid and baking soda in separate bottles, shaked the both bottles, installed the DIY CO2 kit, closed the valve and began squeezing the Citric Acid bottle, I managed to mostly built up pressure around 1.8kg, but by then I didn't have any strength to squeeze it any further and the pressure wasn't building up after waiting two hours, so I tried the method of opening the valve, waiting for citric acid to flow in and immediately closing it, repeating this until the pressure built up to the green zone. My DIY Co2 system came with the white balls, but no magnet, but then when I started the system, it was pumping Co2 into the tank for awhile without issues, but then it started consuming the citric acid at a very fast rate, It was under 1bps. It eventually consumed all the citric acid, with some pressure left, but eventually all the pressure and Co2 will be used up, the baking soda would still be reacting with the Citric acid to create Co2, but it was at a very slow rate which barely produced any CO2, this all happened within a few hours, so I have no idea what am I doing wrong. Or is it the citric acid or baking soda was not reactive enough?(My tank is 5 gallons). I have watching all your videos on Co2 too, but can't seem to understand what's the problem. Don't stop creating videos, as you are one of the few fishtubers that people from around the world who are not living in the USA that can relate to what you are using or pursuing. Much help is needed thank you.

My solenoid co2 getting electric shock give some solutions

But the co2 selnoide problem is that when you turn it off and after a while on all the pressure will be released and a lot of co2 will be injected at one time and that's a problem how can i avoid that?

Mine leaks is there a way to make it stop

I bought this exact solenoid. Has anyone else has issues with the Co2 flow not stopping when there is no power?

I have a solenoid. Why is solenoid very hot?

I hope this video helps you understand what a solenoid is and how it's used!

Guys please help me 😣😣 So i removed my betta fish to do a 90% water change (cause have an algae problem and missed a water change for 2 days) and after doing the water change and acclimation, i netted my betta and placed him in his tank but i noticed that his left fin wasnt moving and that he was very weak. Im scared that he might die in a couple of hours from now. What should I do?!? Please. Anyone. Help. 😣😢😳 Edit : I also noticed that he has clamped fins... 😣

This video brought to you by... contraption

Can I connect the solenoid to any timer, or are there special ones?