What is a Thermoelectric Cooler (TEC)?

No video

What is a Thermoelectric Cooler (TEC)?

Рет қаралды 280,215

4 жыл бұрын

Thermoelectric devices are semiconductor heat or refrigeration units which use the Peltier effect to create a heat flux between the two surfaces of the module. Learn more about how they function and their role in the thermal management of electronics.
www.qats.com
Advanced Thermal Solutions, Inc.
A leading-edge engineering and manufacturing company focused on the thermal management of electronics.
Service, Products and Training
• Cooling Solutions - From Chip to System
• Mechanical Packaging and Design
• Design Services
• Air and Liquid Cooling Solutions
• Rapid Prototyping
• Custom Heat Sink Design
• Research Grade Thermal Instruments
• Engineering Training
• State-of-the-art Experimental Laboratories
• Qpedia Thermal eMagazine

Пікірлер: 62

@cptrikester2671 2 жыл бұрын

Thanks. I disassembled one of these and was fascinated at the simplicity, but didn't know why it would work.

@codyzamora829 Жыл бұрын

I love this person’s voice so much. Serious I would love to hear him explain anything.

@dm83x 2 жыл бұрын

I almost disassemble my Black Shark Phone Cooler because of my curiosity. Thanks to this I didn't have to do it just to know how it works

@heatsinks 2 жыл бұрын

We're glad it was helpful!

@johncabael5306 11 ай бұрын

I watched this video because of the black shark also😅

@aerithscrush4907 2 жыл бұрын

Very important video.. thank you ❤️👍

@heatsinks Жыл бұрын

You are very welcome, we are glad you found it helpful!

@AllTechLawrence592 Жыл бұрын

Thanks now I know how to use that ☺️

@seek3n 2 жыл бұрын

Dell need to look at this

@tomwhelan4561 2 жыл бұрын

I thought so!

@parkers2855 6 ай бұрын

You spelled rigidity, 'ridigity'.

@user-qu8cx3tf1w Ай бұрын

So what ????? 🙄

@alpyal1287 Ай бұрын

Thats cooler

@MonkoGames 22 күн бұрын

learn some information theory, she got the point accross, that's all that *madders

@Bleepbleepblorbus Жыл бұрын

Tl;dr edition: The part uses direct current (dc), to make one ceramic plate suck heat from the other ceramic plate

@dfernandes1433 2 ай бұрын

Would it be more effective in dehumidifiers that are used in winters, when temperatures in the room drop to 5 deg C

@superextremesmanufacturer2682 2 жыл бұрын

Great

@kimf.lobiano8695 2 жыл бұрын

Do i need to put a gap between the heatsink in the cold side and hot side?

@wazileiyjh 3 ай бұрын

Hard to undertand how. It cool

@heatsinks 25 күн бұрын

Hi @wazileiyjh, this article may help to explain more. It is a PDF www.qats.com/Qpedia-Article/Qpedia_Apr07_How_Thermoelectric_Coolers_Work

@ASIFKHAN-ie9es 5 ай бұрын

How to select heat sink for different modules?? Like how you will know the thermal conductivity and dimensions of heat sink

@heatsinks Ай бұрын

Hi - Your best bet is our free training on how to choose a heat sink, you may see it for free here vimeopro.com/user9706503/ats-webinar-series-air-cooling-heat-sink-design-and-selection

@MoonRover-un5uf 7 ай бұрын

What maximum and minimum temperature can this achieve? Would it be useful in a car cup holder to keep your drink hot or cold?

@supermokh32 2 ай бұрын

been playing with this one at work, it can easily reach

@ambassador.to.Christ 3 жыл бұрын

So you can only work if I supply power to the power leads? I remember hearing about these and I was hoping if I get one side hot the other side would get cold.

@jake8215 Жыл бұрын

No you can heat it up and get a voltage out, pretty low but enough to run a stove fan

@laserma 3 жыл бұрын

I want to make my own personal mini air conditioner will the tec work in my project ?

@heatsinks 3 жыл бұрын

Hi @Laserma That's a hard question to answer without alot more information. But we can say this: there are products like that on the market, you can see some of them here www.amazon.com/Thermoelectric-Air-Conditioner/s?k=Thermoelectric+Air+Conditioner (that link is not an affiliate link as ATS does not have an affiliate relationship with Amazon). Now, just because there are products like that on the market, it doesn't mean your concept won't be better or more suited to your application, of course. This video might give you some help on such a project: kzfaq.info/get/bejne/d850mrh7yJy6poU.html

@michaeld954 2 жыл бұрын

can both hot and cold be utilized at the same time say there's a section of a device i want hot but another section to be cooled so the heat dose not reach that section

@ok-fl9xh Жыл бұрын

what is the feasibility of using them to produce energy from excess heat? Ie a hot solar panel

@jovanmagtoto1682 3 жыл бұрын

thank you for this video. Informative :)

@heatsinks 3 жыл бұрын

Glad it was helpful @Jovan!

@PrafuljrathodRathod-gz6si Жыл бұрын

Isme hi cepecity wala peltier module konsa aata he 24volt dc 50 amp

@UQRXD Жыл бұрын

I came across one from 1965.

@pulkitsharmapremiumvideos9252 3 жыл бұрын

What is the difference between a thermoelectric generator and thermoelectric cooler? The TEG generates electricity in a temperature difference. It seems the terms are used interchangeably.

@heatsinks 3 жыл бұрын

Thermoelectric generators use the Seebeck effect to generate a voltage/power, while thermoelectric coolers use the Peltier effect which allows the device to be used as a cooling or heating agent.

@pulkitsharmapremiumvideos9252 3 жыл бұрын

@@heatsinks But are they physically different when we buy them?

@Tomy_Stank 2 жыл бұрын

@@pulkitsharmapremiumvideos9252 no u just need to buy peltier module And seebeck and peltier are the reverse process

@davidclark6168 2 жыл бұрын

My son and I have one and put a black piece of aluminum on one side, heat sinks on the other. Then we mounted in on a rod pushed through the center of a parabolic mirror. The black aluminum heated up, the heat sinks drew heat away when the beam hit it, and we were able to generate current to push a small DC fan. Fun experiment.

@liangwei9906 3 жыл бұрын

Can I use TEC ASSEMBLIES to cool my CPU?

@heatsinks 3 жыл бұрын

You could do that Liang, and off a desktop the energy needed to power the TEC would likely be available. In fact, the thermal team at Jubail University College have recently published a paper on this, you can see it here: www.sciencedirect.com/science/article/pii/S1018363918310936

@jescompany 2 жыл бұрын

So you would use thermoelectric on a refrigerator that may be out in a garage where the temperature is not consistent?

@heatsinks 2 жыл бұрын

Kathy, if we understand your question properly, it sounds like you may have a temperature situation where the temps get so lowthat you have to heat the storage unit (refrigerator)? Maybe we are misreading your question? You might build a refrigerator from TEC's, that could be an approach in this case. You might also find using a TEC chiller or heater might be best too. ATS makes the TEChill family for this, but you can also consider ThermoTEK or LairdThermal.

@matthawksworth 11 ай бұрын

What if you soldered the wires to each other and applied heat to the 'hot side,' would the 'cold side' become cooler? I just want to apply heat and get cold, I dont care about electricity. Thanks

@TheLastCrow5150 7 ай бұрын

Same idea. Depending on the metals it'll just change the temperature differential. This isn't a good idea though since it can heat or cool too much and carry over to the other side; therefore losing efficiency. At this point you'll need a heat sink for the hot or cold side in case one side gets too hot or coId. Best to arrange the metals so that they hit the tempurature you need most efficiently.

@liononline84 2 жыл бұрын

can it make ice??

@heatsinks 11 ай бұрын

Maybe....our chillers will make ice, while testing a new chiller we froze the pipes across the test fixture!

@gameforpeaceyt6784 2 жыл бұрын

Great .. how iam using this .. cooling fan for mobile???

@heatsinks 2 жыл бұрын

If I understand your question properly, no the TEC is not a fan. It is solid state cooling so no moving parts. And it could be used for cooling virtually anything in a computer but the key is that the TEC does take energy (electricity) to do the cooling.

@JBeck2468 Жыл бұрын

Can this be used in the automotive sector to replace the HVAC system within a vehicle?

@user-fh8ip7df3z 7 ай бұрын

It would not be efficient I don't think

@Kakunoshin_Niitsu 3 жыл бұрын

What about the durability?

@heatsinks 2 жыл бұрын

They are durable, but, alot will depend on your specific application.

@juvertreymapait9957 2 жыл бұрын

Why is the output of Peltier Module.?

@heatsinks 2 жыл бұрын

Hi Juvert, can you please help us understand whay you mean by "Why is the output of Peltier Module?". Do you mean how does it work or why does it work the way it does? Thank you!

@deeznuttz7980 2 жыл бұрын

Set this on my car amp never got hot again

@jackjones9460 Жыл бұрын

What does N and P indicate? Are those chemical symbols?

@heatsinks Жыл бұрын

Hi Jack, the N and P indicate types of semiconductors. A typical thermoelectric module is manufactured using two thin ceramic wafers with a series of N and P doped bismuth-telluride semiconductor material sandwiched between them. The N type material has excess electrons, while the P type material has a deficit of electrons. One N and one P make up a couple.

@jackjones9460 Жыл бұрын

@@heatsinks Does N represent negative and P, positive? Are there non rare earth elements which could be used?

@locryStudios Жыл бұрын

you didnt explain anything really... sheesh...

@heatsinks Жыл бұрын

Thanks for stopping by our channel Locry and for taking the time to leave a comment. I'm not sure what your comment means. Peltier Coolers (TEC) are pretty simple. To that end, I think we've provided a basic understanding of them in our video. However, as an engineer, perhaps you were looking for more application oriented explanation? As engineers we understand that and so here is a white paper that explains the process to choose a TEC. The link goes to a PDF, and the PDF is free and there is no requirement for an email registration: www.qats.com/Qpedia-Article/Qpedia_Sep12_TEC_Selection_in_Thermal_Management