Taras REFUSES to read instructions COMPLETELY.....😂😂😂

You should do high gloss at the end. 1st - primer 2nd - activator and dip 3rd - high gloss (top coat) to lock the colour in place

Steps: 1) primer 2) white (base coat so it looks better) 3) activator (onto film in water) 4) clear coat (to protect it) Note: always dip at a 45 degree angle

no you're supposed to put the clear coat after you dip it in

This should be the right order for hydro dipping: primer>white>texture>clear coat, and also, you're supposed to dip it at an angle, or by slowly rotating it while lowering it in the water, so you cover more surface area.

I think the " clear coat" was supposed to be applied after the hydrodip. Shaking the object underwater probably didn't help either.

Following the instructions would have been handy. >_>

We want part 2 because this video you make mistake pls make a part 2 video

If the high gloss clear is a type of clear coat wouldnt that go on last like with normal paint?

Dip at 45 degree angle

1) primer 2) white (base coat so it looks better) 3) activator (onto film in water) you put the cup in water you are supposed to hold it at a 45°angle and while droping it in the water go a little bit forward 4) clear coat (to protect it) water must be litlle hot and BOOM!

I think you were going to slowly when you were dipping the items

Your head. Taras. Your *head*. You know you want to.

Y did u put the clear on before the white you put clear on after the dip

Was anyone else watching the ant on the bucket

Any one else see that ant

You’re supposed to do the primer the white paint then dip it in then spray it with the clear reading the directions always helps

1st one : minimal wear 2nd one : battle scared 3d one : field tested

Idk this guy but i love this guy's accent and how he blamed himself than the actual product and he is so honest

Kit: *come with gloves* Taras: oh cool it comes with gloves Also Tara's:*doesn't use the gloves*

So many mistakes and memes.😂😂 where is pillepup

I believe that the gray goes on first, then the white (to keep the colors as accurate as possible) and then the clear goes on after the dip.

2:36 I have just a tiny cup *cuts alot*

Took me a few years to realize that he says “welcome to my laboratory” I just used to make up some word like “malabaratoory” or something

Hydrodip your safety glasses!

"It says for 2 hours, Think I'm gonna wait a little bit less" 😂

I just love his personality. He's always so positive about most things. Lol He gets an "A+" in my book for the effort 👍

Hydro-dipping is a true art, I do it sometimes on a less professional scale using spray paint sometimes but I also use the printed sheets that I custom order. Basically to explain it simply, the primer is the base, it aids in adhering the wrap onto the product, the white coat creates a brighter backdrop thus a brighter finish when applied after the primer this is because the material used is slightly transparent, after dipping (use wire for less noticeable attachment points and dip the item at an an angle for best results), you rinse to get rid of excess material and then use the clear coat as a way to protect the finish.

The clear goes on after you dip the item.

The only KZfaqr who didnt change after the fame💙

I think there's a knack to dipping it, you have to sort of carefully turn and twist what you're coating with the surface of the water - thanks for sharing!

i swear i just watched some hydrodeeping videos and i now see that my favorite youtuber is uploading it too YEYYY

So basically water marbling for things other than your nails.

How to cheat at water marble

"if it works i'm gonna hydrodip everything" Me

I heard that putting the items in at a 45 degree angle will give the best results in a youtube video

Hydro dipped items are so Kul!

*These are very interesting kits.*　*I'd like to do it!!*

“We going to put to the test my hydro dipped kid” ~ Taras Kul Jk I love you

The hi gloss is for a finish cover I'm pretty sure. I think the kit goes primer, white if you want for colors of print to show more, then the film them the clear gloss as a protective finish

Use different color spray paint in water. Then hydro dip something. Cheap and works pretty good

“HiDra DiP kIT “ love this guy 😂

You can also use oil based spray paint. Just spray it in warm water in any pattern and just dip your choice of item.

Imagine the results from doing a little research on hydro dipping and actually following the instructions. Looks like fun and something I want to do

You have to be in a 45 - 50 degree angle. Try it again ^^

I hydro dipped my xbox and ps4 controllers. It works great *if you follow the instructions*

Water in a metal bowl. Drop fingernail Polish into the water. Dip cups I'm to the Polish. Seal with clear coat acrylic spray. Hydro dipping on the cheap.

YOU ARE AMAZING! You do a good job of demonstrating the whole process from opening the packaging, what it includes and how to use

Guy has been doing these videos for over 5 years and still couldn't gaf about pronouncing '#1 priorities' haha. At this point, it's apart of his charm I guess.

Put a Taras shaped sheet in your pool and belly flop on to it. It would be Kul

the high gloss is clear coat... you prime it then put the white on it to make the hydro dip like how it’s supposed too and than you put the clear coat on last to lock in the design. That’s why it didn’t work.

The clear is meant to use last , after you dip .its a varnish to protect it .

Ceramic has a soft c at the begining so it's pronounced like Seramic.

Hydro dip my tip

I like the second cup it looks cool with the bottom hydro dipped and the top primed

The problem is you have to dip your objects at an angle, so the paint livery has an edge to grab on . This will make it a lot easier to distribute the patterns etc.

The roll wrap color reminds me of the sushi wrapper nori!

Wow this is magical and BOOM!

"I'm going slowly." Punches the cup to bottom

You are supposed to put in the object that you are going to paint , first the primer let it dry then sandpaper it then paint it with the white color then you put it in the wrap , (the wrap in the water with the activator before you place the object) then you put some thin layers of gloss clear

Waw Lock a this.

You sprayed the activator to long

Try this: put lukewarm water in a bucket and use pilox to spray the surface but before that spray the stuff that you want to spray with white and just like hydro dip

Tarus u spray the cup first with primer and let it dry (primer helps the real spray paint or hydro paint to stay on) and after hydro dip then clear gloss

I wonda if it’s goong to wurk on a keramic cup ???

The tape was ruining it

“And todeh we ar goig to put tew thee test, mah Hydrah Deep Keet” 😂🤣😂🤣

You can use spray paint and water to get same effects just go to use a primer and have everything ready before spraying paint on the water then dip same way

karemic cup

In Soviet Russia Hydro Dip kits Kit You

i’m pretty sure you rough it up put primer on, then paint it, then use the clear coat to make it shiny

The high gloss spray is for after you are done spraying it to seal the whole job

Arent you supposed to dip it at an angle?

You are suppost to do primer than white than dip and than clear

The Hydro Dip Kit looks great! I wish I could try it.

You also need a method to lower the items without touching them, ie using a hook on a chain with a pulley or something similar.

Looks like he should try and learn water marbling with Cristine 😻💿😻💿😻💿

*_Keramic Cup_*

The white and gloss is a sealer that goes on after you put the design on.

I've always thought hydro dipping was awesome. The videos of the rims being done Is pretty cool.

I didn't even know you still made videos. Haven't watched you since like 2013. Thanks trending page.

wuts app everbuddy welcum back tu mah labaratary safty is numba won prioritory

I haven't read the instructions, but I believe you put the clear coat on after the dip.

The high gloss clear is a clear coat u put on after dipping the item to protect it

Karamic Cup😂

I could almost smell the fumes through the screen

You should move the cup around the paint that is there in the water coz once you dip it the paint bends and breaks off from around.

DIY Method: 1. Get a tub of water 2. Spray paint on the top (use more than one color for a cool pattern) 3. Hydro Dip

You should really wear a mask when you spray ...

You Are a Wizard Taras...!!!

dip at 45 angle and try to use a bigger bucket .also somewhere ware there isn’t much wind

Reading the instructions really helps Olig...

Thanks for the great content, CrazyRussianHacker!!

🤔

Taras, water should be warmer. Dip it at angle. Clear coat after dipping, dry it, coat, for a gloss look.

☺️ I agree...Commercials make it look so *easy* ... Good vid

Do ir without the tape¡¡¡¡¡

keramic?

For a handle you have to roll it in the decal to cover all of it same as the cup

you can also hydro-dip using a bucket of water and cans of spray paint :D