Damn yo, inflation really hit hard. Can’t believe these were that cheap only 3 years ago.

I LOVE the 3 ton low profile, long reach. It has the fast foot pump, plus it goes lower and higher than all the other Daytona jacks. It really is a solid piece of equipment and gives me the most versatility out of the bunch.

I lift the car with my hands then kick a huge boulder under it.

Great review! I thought I was the only person that gets this excited about floor jacks now I know I’m not alone! 🤣🤣🤣🤣

But will it roll over a zip tie🤔🤔🤔🤔🤔

Every mechanic needs & respects an awsome jack like this one Great review mate

Hello, I’m from the future (2023) the price of the 4ton model is $240 at harbor freight😩.

I bought the Original Yellow 3 ton for 179.00 3 yrs ago when they were still in the midst of the lawsuit with Snap-On. It was the only one available at that time but prolly would go with the lowest profile 3 ton version today

Love the enthusiasm! Great review man!!

If I had to make the choice. I would have went for the 3 ton long reach low profile. Though the lowest height is marginal but sometimes just a half inch can make a difference. What I do like is the higher 24inches. Works real well with the 6 ton Jack stands. And when I am working on the ground under a vehicle. It is nice to have that extra room without having to raise it in multiple stages to get the height I need. That is my own opinion. You may not need that aspect of it. I do.

I bought the 3-ton low profile long reach jack for myself. It has plenty of weight capacity for my needs, and I know for a fact it will easily go under my mother's 2007 Corolla S and lift my 2002 RAM 1500 Quad Cab 4x4 from the frame rail lickety split. I got it on sale for $179.99, so I was very happy with the price, too.

You should have gotten the Daytona 3-ton, low-profile & extended reach for $25 more. It has the foot pump to quickly set the saddle on the frame rail, plus it gives you an added 4-inches of lift.

Thanks Dow I'm gonna have to pick me up one, glad I waited now.

“How about that “ with the mechanic pose right after 🕺🏽 😂 awesome video 🤟🏾

Good topic and video. I'm considering the 3ton lowest profile with the long reach, and foot pump feature. These never go on sale, however... I am also now considering the one you got! 4 tons is no joke! Thank you Justin! 👍

All the jacks at HF are good choices. Me personally i got the 3 ton low pro Pittsburg and its been nothing but great and ive lifted everything from low ass hondas to full size trucks. Great video Justin.

If you are going to be lifting heavier duty trucks with it I'd get the 4 ton. For most people however, the 3 ton low profile long reach is the best option. Has the foot pedal for when you don't want to pump it by hand 24/7 and can reach good jacking points easier than the regular one, especially if your pinch welds are rotted away and you can't use them.

We will ignore you told us about the wood thing.... but we’re all still gonna do it anyway🤣

Great video! Thank you. Definitely helping me make the right decision.

I think this is an excellent choice and will fit a wide range as you have shown. Doesn’t this come with grease zerk too! Anyway. Good choice, good demo! I went with the 3 ton Pittsburgh Automotive lightweight 67 lbs vs 100 lbs Daytona 4 ton as I am twice as old as you and only work on my stuff. Not like I am going to be pushing the jack all over the place but if I need to load it up to take with me, every pound saved helps us senior citizens! Thanks for sharing!

When you're in a tight spot I've come to find that it's actually safer to have a few pieces of wood that are large enough to put underneath the jack rather than on the jack itself. This is definitely far more stable but can still be a bit hairy

I really like my yellow Daytona 3-ton super-duty professional floor jack the past couple years and like seeing your comparison of them. Thanks for the video and exhibition!

This video helped me out. Going to get me a Jack.

Thanks for the video i bought the same one after watching the comparison

After spending several weeks reviewing the Pros and Cons on the Daytona 3-Ton Low Profile/Long Reach Jack and Daytona 4-Ton Jack and watching your video. I just picked up a Daytona 4-Ton jack in Blue for $199 at Harbor Freight. ($239 - $40 coupon). I like the fact that the Daytona 4-Ton also has ZERK fittings for the front wheels just like the 3-Ton Super Duty. Will be using this for my current Toyota Tundra and soon to be Ford F250 Turbo Diesel!!

Really enjoy your videos man!

Best one is the long reach jack that was 199 in the vid with the footpedal. Has a long reach and max height of 24 inches. Harbor freight had it on sale for 179.99 plus there was a 20$ off coupon .

Thanks for the videos. I was leaning towards the low profile long reach one until I saw this. For the time being I'm using the Pittsburgh low profile heavy duty. Works well. 2 and 7/8th to about 19 inches. Only paid 79 dollars with coupon last year

Great video. Thanks 😊

Have you examined these to see if you can find a quality difference in design, thickness of sheet, wheels, etc.? Or is there just a slight size difference and capacity? Great demo!

Great video, I have the long reach low profile and is great when you have to support rear differential, engine and trannny when changing motor mounts and need that extra reach under the vehicle, instead of crawling underneath the truck to find the jack.

Thanks for the video Justin....I'm thinking about getting that 4 ton myself.... what do you (or any of your viewers) think about the HF Aluminum jacks? .... I also need a jack for transporting in my truck.

Great review! I've been debating which one to get for a few weeks now. I recommend checking the hydraulic fluid level and then bleeding the hydraulics to get the air out of the system. You'll most likely get a more lift travel with each pump. Air is compressible and no good for hydro systems.

I definitely want one in that green pretty ...like sublime green 👍

Just bought mine. It works great

Great video thanks

Nice video brother, you should have gotten the one with the foot pump, makes it easier to start and way faster too, but it's still a badass floor Jack, you take care and its Beer friday.....!

i will be buying the long reach soon, i have the older pittsburgh 2 ton long reach been a great jack, 4 inches is 4 inches i have lifted junk and i need all the height i can get.

Awesome job justin you wont be dissatisfied!! I went with the 3 ton green low profile 👍

Awesome video...Great guy!!!!

Thank u just got mine today

“U know what ignore what I even told u about the wood thing” I love this shit !!! Getting making videos Justin !!!!

Nice jack! I picked up the low profile 3 ton model with the 20" lift a little bit ago and freakin love the thing. I used to have to do the 2X4 on my trolley jack like you talked about to get my big ol Durango off the ground. The Daytona lifts it higher than I even need to go with ease. I don't know why anybody would be disappointed with these jacks.

The yellow jack is the best one they sell. It has greasable front wheels and 3 or 4 other grease fittings.

Just bought the yellow daytona, so far impressed

You said you paid 179$? I was about to get one last week but the price was 219 I think. Did you get yours on sale. Thanks for sharing. This vid helped me a lot to make a decision

I've wanted that one for a while

thank you man good video

I have the exact same Jack. Wish it had a little bigger wheels as it gets caught up on everything and won’t roll. Love mine

Justin Aren't you suppose to purge these before first use. Also doesn't the yellow one have a longer warranty. The reason they're a tad more expensive?

It's your $ justin so if you think it's the right one then it is. Keep doin you man you're awsome👍

My audi underneath the car is covered with plastic trims and i cant see any metal where i can set the jack to! Besides the side skirt … any recommendations where is safe to set a jack ? Beside pinch well on the side

There's a recall on jack stand of harbor frieght. And I would like to say dont forget to put hydrolic fluid in floor jack.

What would you recommend for 1997 dodge ram 2500 because its naturally taller then most trucks

Nice jack i wanted one off those

I bought that low profile jack a few months ago and it for surely has some weight to it

Do they make a wheel upgrade replacement for these?

Like the enthousiasm and recognize the efforts. Question: Why not buy the "Racing" [aluminum] version? 3ton seems to be close to the same $ as the 4T steel version and 40 pounds lighter. I would think anyone with anything less than a 1ton could go with the 3 or 2.5 easily.

Why is this so funny. Lol I subscribed and haven’t even clicked on your page lol

I just picked up the 3 ton super duty, I saw they manufacture it in the same facility as the snap on one

For a corner. 3 and 4 ton jacks should breeze through most things. The yellow jack is superior because its hydraulic systems are much better. Meaning it will hold your shit up for a week with no drop. These other jacks wont do that.

Good video thanks

What value could we place on the super-duty? I’m shopping now, and wondering if super duty might translate to better quality (less chance of it breaking down)? Or do floor jacks tend to be trouble free anyway, so super duty would be meaningless outside of a busy shop? One of the things I hate about my old jack is when you try to lower it down onto the jackstands, it always comes crashing down (there is no slow).

Great topic, I do need to purchase a floor jack soon. I had been wanting a green one to match my green tool cart but the Daytona green looks different/brighter than the US General green. I need to re-think my life now.

Hey Justin, my names Gregg. Just finished watching your video on you deciding to purchase your Harbor Freight 4ton extrem green Daytona floor jack. You ask the question, if we thought you chose the right floor jack. Really just a couple of 3 things that you need to consider when making that decision. #1: Cost How much can you afford to spend on a floor jack? #2: What is your intended use for this new floor jack? Are you going to be working on just your 2 car & that's all? Or are you doing side jobs @ night & on weekends? Or are you taking it to a full blown garage. Also what type vehicles are you going to be lifting (low ground clearance vehicles, pickup truck, 4x4's)? #3: Last but not least, warranty. I could be mistaken but I believe 1yr is the longest warranty any of the Daytona floor jacks have except for the YELLOW Daytona Supper Duty 3ton floor jack which has a 3yr warranty. That's the same jack that Snap-on tried taking them to court on copyright infringement. Snap-on didn't win. Thank you for your channel. Gregg Muse

I got the Standard low profile 3ton, and its very loud rolling it around in my quiet neighborhood

What's a good jack for a beginner? Just for oil changes and brakes. (2012 VW New Beetle) Thanks

Thought you purchased the Black one? What about going from the front of the car?

My Craftsman 2T floor jack I got back in ‘96 finally broke. I had to get a new one so I got the green NASCAR 3T jack. I hope it’s good. The Craftsman one was great for my Ford Taurus back when I bought it but not high enough for my 2 classic Mercedes or the Nissan Frontier. I’m hoping the green one will lift high enough.

I would have liked to have seen the tire flat (deflated) to see if the low profile jack was low enough.

I like this guy humor.

did that come w/ fluid already in it?

Thanks bro

The only reason I think I would go with the Super Duty over the rest is it has a 3 year warranty. I think the rest are only one year.

Good video Justin!! I am contemplating on a new Jack, I may just go w/a Harbor Fr8 4-ton, the 1 I'm replacing is a 3&1/4 heavy steel old monster, perhaps an aluminum would be nice 2 have??? Thank U-4 ur time Mr. Dow.

I ended getting the long reach for 199 could not use coupons, looks like a good jack, but you need a jack to lift this jack up, real heavy

I like the jack

Thx for doing this review. Iam looking for a jack. On the used Jack's, what can one look for to check if it's ok. Any recommendations on jack stands

I'm trying to find a jack that's efficient for me also. I have an 02 Trailblazer which I'm going to do a brake job on in the springtime. Years ago I had a jack where if you pump it up one time and it shot up until it hits something solid than jack it up as usual. I think it was called daytona racing jack. I found it at Sam's club. I would love to find something like the ease of that one.

Good job..Daytona the best looking jack..looks solid

Just bought a 4-ton after watching this video and the other one on Daytona floor jack. I think the 4-ton is a better value as you said it. I got 6 lbs truck and 6 lbs travel trailer. The 4-ton works better. The 3-ton is too light for me.

Wha jack stands do you use?

How come you didn't compare it to the 3 ton professional jack that harbor freight compared to snap on jack?

good to know , Thanks for sharing!

I just bought a 1.5 ton pittsburgh, I hope it holds up better than the jack stands lol

What do you do when you jack at the pinch weld? Use a special slotted pad?

I went with the 3 ton low profile. It works great on my k1500, older impala and my Avalon Touring.

I got the 3 ton super duty. It will outlast all the other ones there.

How heavy is this? Im looking for A jack I can keep in my truck for emergency's like flat tires.

Did you add hydraulic fluid? if not, the reservoir is probably mostly empty making the rapid pumping not as effective as it should be. It was clear that your pumping action range was very limited.

I bought one recently and can say I noticed the low profile one is worse imo as it only goes about an inch lower where i cannot fathom a situation where the regular 3 ton daytona wouldn't fit but secondly the low profile one pumps up about 30-40% slower and for anyone who regularly works under a car you know this is the biggest factor in buying these lifts.

I have a quick jack that I bought from Harbor Freight with the quick pedal in the back. It does meet the frame quicker, however because of the lift rate, it is hard to jack up if you are lifting a heavier vehicle. I don’t see that jack offered anything from Harbor Freight. For smaller cars it’s great, not so much for full size cars, or trucks. The jack that you’re showing looks to be better than the one that I purchased, for heavier vehicles.

Awesome review I wish I seen it before I purchased mine ..

Just got a $20 emailed coupon off any Daytona Jack from HB good until 9/29/19. Thanks for the video!!

Which one would you recommend for a DIYer doing routine maintenance like rotating the tires and oil changes? I am still bummed you're not a neighbor😍😀 Thanks Justin once again for sharing your thoughts and videos, Rodney

Justin since you have a relationship with harbor freight maybe you can answer this question. Is it true that the yellow 3 ton Daytona Jack is built to a higher standard than the rest of the Daytona Jack’s??? I’m sure everyone would like to know and It can guide our purchases better.

Scandel~ the Warrior playing in the background.

On that Jetta, where do you place Jack stands?

Justin quick question bruh.? Daytonas worth the premium price? Compared idk lets say a 70 dllr husky or craftsman etc. I really need a new jack since my last got stolen lol.

Nice! I need that Jack!!