◀ Kim Ji-woon’s site Wikipedia ▶
The definition of synthetic wood is a form made by mixing wood flour and PVC ingredients.
There are two types of synthetic wood: classification by composition and type of processing.
There is a type made by mixing wood flour and PVC ingredients.
The most important factor is whether the type of wood flour contains sugi (cedar) or bamboo ingredients.
There are two types of processing forms: semi-finished solid form.
Synthetic wood prices vary depending on the production area and import status through website or phone call.
The definition of synthetic wood is a form made by mixing wood flour and PVC ingredients.
Advantages and Disadvantages of Synthetic Wood The advantage of synthetic wood is that it is semi-permanent.
Durability is superior to that of wood.
Disadvantages of synthetic wood include high waste costs during demolition and high construction material costs.
Synthetic wood siding products are also available for other purposes.
Synthetic wood exterior material has the same meaning as synthetic wood siding.
Siding refers to a construction method that is installed on the side.
◀ Ji-woon Kim, CEO of World Building Materials ▶
Hello. This is Ji-woon Kim, CEO of World Building Materials.
What about today’s content?
(Pet friendly) We built a container swimming pool in Okamention.
Additionally, I would like to show you how to construct a composite deck.
We plan to construct it in an area of ​​3m wide and 6m long starting from the swimming pool.
The plan is to construct it in a Nieunja shape on both sides.
I will show you the zinc square pipe, composite deck, and anti-corrosion deck materials.
◀ Kim Ji-woon’s 1-minute post ▶
Materials required for side clip construction required for fixing the side when constructing synthetic wood
◀ Ji-woon Kim, CEO of World Building Materials ▶
I'm working hard by inserting side clips while cutting.
We prepared a zinc pipe square pipe measuring 40mm wide, 40mm tall, and 6m long.
We prepared zinc pipe square pipe width 50mm height 50mm 6M material.
We are working on cutting and constructing the base of each pipe.
The purpose of the zinc pipe square pipe width 50mm and height 50mm is welding the load-bearing column frame.
The purpose of the zinc pipe square pipe width 40mm and height 40mm is for welding.
We prepared it as a ready-made product with a length of about 6m.
Composite decking is a product that is constructed using clips.
This product is scheduled to be constructed by combining pieces using clips.
This is how I brought Nokiha products from World Building Materials.
The front is made of wood grain.
The back side is like this
It is non-slip
Because it spans the bottom of the container, the beam is erected in this way.
We are planning to construct it by welding.
◀ Kim Ji-woon’s 1-minute post ▶
This is the mortar mixing process for lower landfill.
◀ Ji-woon Kim, CEO of World Building Materials ▶
The preservative deck was prepared at 21t*120mm*3600mm.
◀ Kim Ji-woon’s 1-minute post ▶
H (Hour) Grade 3: Product made by pressurizing preservative fluid for 12 hours
◀ Ji-woon Kim, CEO of World Building Materials ▶
It is brought in as H3 grade.
This is the main product supplied and used by government-run (national) public corporations.
Now we plan to apply oil stain to the product and place it on the edge to secure it.
The sides were also blocked with composite decking to create the shape of a door.
I'm planning to make a door
The most important part of each pipe base work is
The most important thing is to check the level and level it.
The advantage of zinc square pipe is that, unlike colored square pipe, it does not rust.
Because the ground was weak, we leveled the ground and did the mortar work like this.
The scaffolding on which the composite deck will rise is completed.
There is a subsidiary material called a start clip in front.
Connect the start clip first and secure it with a zinc piece.
It is fixed by inserting a side clip on the side.
There are two types of subsidiary materials: start clip and site clip.
This is a construction method that involves fixing stainless steel (zinc) paste.
The start clip is like this.
The side clips are made by inserting them.
For a good finish, construction must be done properly from the starting point.
The first level (horizontal) work is the most important.
#welding #construction #deck #composite deck