Thank you. You cleared up all the confusion. I bought 3 routers for my home, but I couldn't set up the "one mesh" network. Thanks to you, I now understand why I couldn't do it. I wish TP-Link had explained it as clearly as you did.

Great video explaining the limitations of OneMesh. I'm using 4 AX10's, all as wired AP's, and when I saw the new firmware with OneMesh, I was hoping the mesh technology could be used to improve handover between them while keeping the wired backhaul. Sadly no, but at least my question was answered quickly.

Your graphics are great, simple and combined with crystal clear commentary in a simple way is awesome. Thanks.

On my home onemesh network I had to disable the 2.4ghz band because my devices connected preferably to that band and, with that, the speed was reduced a lot. When I turned off the 2.4GHz band all devices obviously started to connect with the 5GHz band, with excellent speed. I was intrigued by this. I suspect that the devices give reference to the strongest signal and not the fastest. Here's a tip for those who are having speed problems with the onemesh network: try disabling the 2.4ghz network. In my case, living in a 3-bedroom apartment (90m2), the 5ghz band, using the ArcherAX10 router and the RE500X repeater, got the job well done.

Thanks Behfor, I recently started watching your videos when I had to configure my router as wireless repeater, I must say, you make amazing videos, really helped me a lot.

Clean, simple and covers all points. Very helpful Behfor .. Thank You :)

Amazing video, answered all my question I had about OneMesh.

Your video just saved me from buying another router to try and make a mesh connection at home. I have been trying to find out wether one mesh will work with another router or not and couldn't find information about it. It is sad to see that onemesh would work only with repeaters and I can't make an access point for example and set up one mesh.

nice video. i was actually gonna upgrade my main router, and use my TP-link rolder on as one mesh repeater. never crossed my mind it couldnt be done. at least now im free to choose another brand of router

Had the same issue with it - wish the OneMesh worked with multiple routers too, instead of it being limited to a router-repeater set. Shame. I'm sure the software and hardware is already there in all the routers. Just a question of their will, to enable it.

Yes again you answer the question I could not find anywhere else. The One Mesh wifi setup works like the Xfinity Pods where it dynamically selects the bandwidth and you don't get to decide.

Very well explained, Thanks! I was trying to decide between TPLINK AX20 and Huawei AX 3 Pro. Basically because of the Mesh capabilities, I am likely to go with AX3 Pro

Excellent video homie, also cool animations, keep up the good work 👍

You have a nice style of presentation. Very clear and a little funny at times. Thank you!

You actually can create a whole network using older routers. But ofc, it wont be a mesh system at all. You'll have to connect them using Ethernet for backbone and use as a separate Access Points. If done properly - the same Name but different Channels, proper (not the highest one) amplification and disctribution actoss the home, you'kk achive a good coverage. In 5GHz devices actually can migrate between access points on their own. So it is reccomended to enable 2.4 GHz point only on a central router, and use only 5GHz on others. I have done this at my home and it works great.

Great video! Answered all my questions about OneMesh.

Excellent explanations. I finally found what I did wrong at home. Thanks !!

BTW using a Gb Ethernet back-haul is game changer in our home along with the ASUS's very flexible guest network to setup a segmented WiFi network to safely have all my IoT devices connected and separated for my intranet along with iPhone's and iPad's which don't need intranet access either just internet - network isolation is a wonderful thing :))

This channel looks like if DiodeGoneWild made the pictures, ElectroBOOM was speaking and theory was covered by LinusTechTips.

Answered exactly what I had in mind. Thank you!

Your videos are very great, thank you Behfor! Btw i really want to see the "onemesh vs aimesh" video :D

Hi Behfor, I have watched most of your videos and I must say you make great Videos. In Your Video, Content coverage is amazing. I appreciate all your efforts make so much informative videos. All the details you mentioned are very helpful & useful. Recently, I have seen your both Videos related to TP-Link OneMesh and I have 1 below query: I have Router Archer C6 (Primary) & Range Extender RE305. I established OneMesh Network, Now what if connect another tp-link router (as Access Point) to Primary Router Archer C6 through LAN Cable?

Very nice demonstration! Thank you very much!

I wondered why I was struggling to set up Onemesh, seems having a non TP Link router as my first one cock blocks the setup

Thankyou! This was very helpful!

Thank you for the video! I have a one remaining question. Do I have to connect "OneMesh node" directly to the primary router? Or is it possible to connect to another "OneMesh node" and create this kinda long line? (e.g.: Router node (connected to the router) node (connected only to the node))

This was so helpful. God bless you!

I love your persian accent bro😁

Great video, thanks! Can you please elaborate why I can't use other OneMesh routers as satellite devices? I have Archer AX23 as main router, and want to buy 2 Archer C64 for my different rooms. I was going to buy them and connect but decided to watch your video first

Can the node be connected as an access point instead of being connected by wifi only?

Very well explained. Thank you.

Is this compatible with my 802.11r fast roaming compatible unifi AP?

How many one mesh range extenders can we connect on the same network ?

Evening. I am confused. Does this mean that I cannot use a tp link one mesh extender to my Tenda N300 F3 Fibre router?

Your presentation is awesome

I have two re 220. Can we use mesh system?

helpful video, thanks dude!

If you had an accommodation dorm in a university, what wifi mesh system would you recommend for such a big setup? It will need to cover about 60 rooms spread out between 4 buildings. Distance between each building is less than 50 meters.

should cable backhauling works for this?

wait... so I can't use another router for OneMesh? Like If i have 2 Archer A6 and want to make it OneMesh: 1 as router, 1 as access point

Hi Can I use a repeater as my main router?

Thank you so much for this great video!👍🏼👍🏼👍🏼 I already have a Archer C7 (twin of A7) in the basement and I got Cat6 ethernet cabling done throughout the house. It's a shame that the repeaters cannot connect to the C7 via ethernet. Otherwise, this would have been an inexpensive way of getting a whole house wired mesh network. Would you recommend using the Deco M4/5 as access points connected via ethernet to the C7?

If i connect tplink c6 v4 & re200 with cable connection then one mesh will work?

Thanks for the wonderful video🙏🏻

Tp-link now using EasyMesh. Mesh between router is possible.

Hi, nice video, can you use two archer units and make them as your one mesh unit...instead of getting mesh node? Is there such a thing or is it capable? Thanks a lot

Hello, please, have you already carried out the meshed configuration on the TP-Link VR600 router?

I've bought one of these, does anyone know if I can use it with my 'personal hotspot' on my phone or not?

When you use these "extenders" as part of the onemesh system do they lose or cut speed like the old school extenders did?

does onemesh work when in using a router in a access point mode??

In setup you indicate you must connect BOTH radios to the mesh, 2.4 and 5 gig, what if the 2.4 gig radio has been turned off and will never be used, therefore it is not available, can the mesh node still be installed using only the 5 gig radio ? thanks

I have an Tp ax1500 router. Can I connect my old Archer C6 AC 1200 to it to use it as a mesh node or access point to increase my wifi coverage. If so , how to do it?

What’s the difference between TP Link one-mesh and the Deco systems? Which one is better in you opinion?

I also disappointed. I have an AX11000 router, AX6000 in wired AP mode and a RE300 repeater. All 3 can now do onemesh but it's super lame TP-Link has not setup for me to make a OneMesh network with these items! I'll be ditching them at soon.

I have a TP-Link Mesh Router Archer AX90 AX6600 and if buy Mesh 1x Deco X90, Should i connect the Router and Deco by Wire or it can work wireless. Please advice

I really loved it ... Great informative video. Thanks

Will this work using a different router like the router provider by the ISP or do I really need to get the Archer A7 for this to work?

Hi @Behfor, I have recently started watching your video and I liked it too much. You are really doing great. You have made a Video with ASUS router for the Dual WAN feature. - Could you please suggest other Dual Band Wifi Router supporting Dual WAN and Mesh Technology? - Is there any other workaround to have Dual WAN setup on TP-LINK routers (I am using TP-LINK Archer C6-OneMesh)? Thanks in advance.

Can i connect another re220 on another re220 as mesh?

Thanks a lot . Nice Video . Question : In order to install and use a Mesh with the Router , don't you need to upgrade the router's firmware? Or router supports mesh directly from the box (talking about an Archer C7) . Thanks again

How many extender connect in one mesh in tp link one mesh router

Can I make a mesh node between two TP link devices, one which is currently use as a repeater? In other words, if I have a router (brand X) and a TPlink RE655 connected as a repeater, can I add a 2nd TPlink to the first one and add it as mesh or as a repeater?

Thank you sir. For tjis vodeo.

I have TP-Link wifi powerline adaptors with wonder if it still uses wifi to connect with each other, or use normal power socket to do its data transfers for internet? If you have any information on this let me know, before i buy TP-LINK AXE75 AX5400 router for onemesh seamless wifi feature.

Awesome video, what is the best range to put the mesh node. Is it ok to put my node where I get 10-20 % wifi signal strength from primary router. So that I can extend to more place. Will my node get the full speed?

Can you please recommend if to increase wifi coverage in my house should I add RE450 wifi range extender or RE300 Mesh wifi extender? I have archer A7 router

I have an Archer C7, but seems only the V5 is Mesh and others are not. How to find if my router a V5 mesh version ?

Great video. Thanks for the info.

I just bought the Archer VR400 and I'm having issues with connectivity. I have two RE230 extenders with OneMesh connected. Are these devices compatible? Is there anything I may be doing wrong. I used to have an Archer A7 in place of the VR400 and it worked great.

I have the AX55. I think it's a little stupid that if I wanted to add an extender that I could not use gigabit Ethernet to do that. Seems like that would be better.

interesting video thank you Behfor :) I would like to see a video on how to setup 2 x ASUS DSL-AC68U routers to use AiMESH it can be done but I just cant get it to work :(

@behfor If I use multiple Re220 devices, must each one be within range of the main router or just within range of another Re220? Meaning..can they be daisy chained?

Any video on onemesh vs deco ?

Can you demonstrate adding 2 re300 to increase the mesh coverage?

Hi, will you be doing an update on the Onemesh system explaining how it works? Has anything changed? Thank you.

So we have to connect both bands to create onemesh? Does this mean the router and extender have to be in the same platforms, dual bands = dual bands, triple bands = triple bands, can't we have single band onemesh?

Thanks, is it possible to connecte nodes on each other so they communicate between each other like the Deco Mesh systeme ? Also it will be nice if you could make a comparaison between Deco Mesh and OneMesh systeme.

thanks

What would be the best device to extend and create a safe network in a hotel room (using hotel free wifi - cannot access any LAN port, should be configurable by wifi only)? I tested a small GL.inet nomad router but it looses the connection too often. Thank you

Are you sure the back haul cannot be ethernet? I see an ethernet port on the RE220.

What is the best mesh network that support lan between the nodes and under 100$ per node ?

Thank you ❤️

Hi i have a Archer AX73 in the living room, if I get an TP link extender RE505X, am I able to roam using same SSID in masterbedroom?

I have a question and I really need your help…are onemesh nodes connect to each other or only to router ?? As I have a very big location and need to find internet solution to cover it with internet

Hi, I am on Tp link c7 router and traditional type of wifi extender (not mesh) TL WA860RE. Will Mesh wifi extender do better job than wifi extender?

Hi, great video, one question though. Do you know if the wireless backhaul runs on same channel as the wifi network or different. I have archer c6 + re200 and the backhaul is on same channel. Do you think having backhaul on a different channel will improve performance ? I can't find a setting for this.

What do you think about Xiaomi repeaters and the new mesh or AX1800?

what i ask is cna i use archer c7 with a c50 for oculus quest airlink stuff

Thanks for making this video. In the first 4 minutes I already decided this One Mesh is not for me. I want my access points connected via ethernet backhaul. I also want to use routers/APs as mesh nodes. Why TP-Link. Why?

Hi pls clear my daubts as i saw somewhere.. Can i use this archer a6 as wireless repeater or wireless ap with some other brand router to increase range, i had used old tp link routers witch was having option of wireless bridge where wifi survey option was available to scan and connect near by wifi

Nice video, thanks. My disappointment is that I cannot connect the one mesh node to the router with Ethernet. I am using an EAP225 with my AX10 as a stand-alone with different SSID and Password, and connected by Ethernet. I’d like to convert to mesh. Seems like I should be able to.

Nice vid. One more thing that is a bit confusing is the fact that to build a OneMesh network you need an AP and repeater which support this technology. But... the repeater itself also can act as an AP and since it allready supports OneMesh system then it renders another question - is it possible to build OneMesh network based only on repeaters (one of them in AP mode), or not? :) I'm not able to find answer to this question on the internet.

is this better than using the deco mesh wifi system?

Thanks for the great info.. need help...so should I get A7 over C6? For mesh setup..thanks in advance

Typically when using repeater, you get half the wifi speed. Does it happen to using OneMesh node?

Hi Videos are perfect Please make a video about ASUS AC88U And then compare it with AC68U. Thank you

excluding archer, it works fine with AP only? 3-4 AP in mesh mode?

Hello, how many tplink devices I can connect to the tplink one mesh system, just like I can 2 tplink devices connected to the tplink c7 router one mesh system? Or I can Put just one?

The fact that you can't use more than one router in the OneMesh is dumb. The Archer AX10 router is approximately £75 in the UK, only a £10 premium over the RE505X, and yet comes with a much more usable 4 ports. I find the plug in extenders just to restrictive, not just in available ports (can always plug into a switch, sure) but also just in form factor. If AIMesh can allow multiple routers, there should be no reason why this can't. It wouldn't be so bad, but TP-Link parental controls are semi-decent whereas they are archaic on the ASUS devices and not good enough on the NETGEAR. So frustrating.

AX6000.......NOT! Been over a year now and it's not OneMesh compatible. Sad