What's best, EQ or Compressor First? (Beginner Tips for Mixing)

Рет қаралды 6,192

Күн бұрын

How do you decide to use an EQ or compressor first when you listen to a track when mixing? Shouldn’t you always use EQ first? Well, it depends. In this video I want to share with you my trick for deciding the processing order of EQ and compression when I begin listening to sounds in a mix.
-- LINKS --
(When available, I use affiliate links and may earn a commission)
📕 Download the FREE "How To Create Clarity And Separation In A Busy Mix" guide! 📕
➤ go.simplymixing.com/clarity-s...
Timestamps:
00:00 Introduction
00:58 EQ before or after compression
01:21 Deciding the EQ compression order
01:55 Using an EQ before compression
02:39 How a compressor controls dynamic range
05:30 Using a VU meter to set up the low end
06:25 Recap my trick for deciding the EQ compressor order
08:04 Bloopers !!
Thanks for watching! Get 10% off WAVES plugins using my coupon code - ➤ www.waves.com/r/ad77lv
🎛 Grab my MIXING ESSENTIALS course: transactions.sendowl.com/stor...
Learn how to produce mixes so you can create balance and separation, punch and power, width and depth, turning your recordings into pro-sounding mixes!
🔧 Check out my gear on Kit: kit.co/simplymixing
🎤 FREE Vocal compression cheat sheet: How To Compress Vocals Like A Pro!
➤go.simplymixing.com/compress-...
You’ll learn:
-how to use compression on any vocal
-my 6 step compressor set-up method
-how to control vocal dynamics so it sits evenly in a mix
--
Subscribe to Sara’s weekly Simply Mixing tips, exclusive subscriber tutorials and updates at go.simplymixing.com/subscribe
-- EQ or Compressor First? (Beginner Tips for Mixing) --
This is a common question that many beginners ask when learning to mix music, does EQ go before compression or after?
Most will probably think that EQ always goes first, but not necessarily. There’s a little process I go through that I want to share in this video that will help you decide what’s best for your track when you are first listening to tracks when you begin mixing.
I’ll also explain why you might decide to use EQ before a compressor rather than the other way around and also why you might go straight for compression. Hint: you can use a compressor as an EQ too! Mind blown...
There are also some bloopers at the end for a bit of fun!
************************
My name is Sara Carter, I’m a professional mix engineer with over 18 years experience, and on this music production channel I’m going to share some of my best mixing tips using a simple mixing tutorial style that will teach you how to mix music like a pro music producer in your own home studio.
▬▬▬▬▬▬▬▬▬▬ ► SUPPORT THE CHANNEL ◀︎▬▬▬▬▬▬▬▬▬▬
☕BUY ME A COFFEE www.buymeacoff.ee/saracarter
💳CREDIT CARD OR APPLE PAY buy.stripe.com/fZe6qJfIM5Uk72...
💵PAYPAL www.paypal.me/simplymixing
*******************************
-- Related Content --
How To Clean Up A Muddy Mix (Create More Clarity And Separation In A Mix) • How To Clean Up A Mudd...
What Is Compression In Music? • Understanding Compress...
Mixing Your Own Music (10 Tips for Mixing Faster and Keeping Objectivity) / f3ah-lo33f
#EQ #Compression #MixingTips #MixingTutorial #MusicProduction
~~ Music Credits ~~
Music bed: www.bensound.com
~~ Video Editing & Motion Graphics ~~
Leila Warner - www.leilawarner.com
******************************
DISCLOSURE: I often review or link to products & services I regularly use and think you might find helpful. Wherever possible I’ll use referral links, which means if you click one of the links in this video or description and make a purchase I may receive a small commission or other compensation.
Many of the links to products/gear are links to those products on Amazon. I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and related sites.

Пікірлер: 79

@SaraCarterSimplyMixing 3 жыл бұрын

How about you? Do you have a preferred order that works best for you or do you just go with your gut?

@MartinvonBargen 3 жыл бұрын

Depends on the material, but in metal I'll normally filter the source with an EQ and then compress if needed. Conversely, I will compress bass first normally, especially when going for a tight, aggressive active pick up sound.

@SaraCarterSimplyMixing 3 жыл бұрын

@@MartinvonBargen Yes, me too with bass. I'll have a filter right at the end of the chain to fine tune the blend with the guitars.

@simonbarth3181 3 жыл бұрын

I think it can be relly cool to push a frequenzy range before a compressor. Becouse it will peak out way less than when bosting after.

@meanoldmartin 3 ай бұрын

how does this only have 6000 views??? there is so much terrible nonsense on yootoob and your videos are outstanding. plus it’s lovely to hear a fellow northerner on the interwebs. keep it up

@SaraCarterSimplyMixing 2 ай бұрын

Thanks!

@snaredrum954 3 жыл бұрын

Always appreciate your calm informative style! Also great to see a Northern lass repping!!

@SaraCarterSimplyMixing 3 жыл бұрын

Thanks! Glad you enjoyed it 😄

@Mike-bj7fm 11 ай бұрын

Thank you for making these vidoes informative and easy to follow

@SaraCarterSimplyMixing 11 ай бұрын

My pleasure!

@braxal6983 11 ай бұрын

I really like your style and the way you teach. I think it is superb!

@SaraCarterSimplyMixing 11 ай бұрын

Wow, thank you so much 😁

@wouterhardymusic 2 жыл бұрын

More bloopers!! Love that

@SaraCarterSimplyMixing 2 жыл бұрын

There’s one at the end of this weeks video 😂

@mvh2275 3 жыл бұрын

Subtractive EQ pre compression and additive EQ post compression. Excellent! Thanks for sharing - Cheers! mvh

@SaraCarterSimplyMixing 3 жыл бұрын

It doesn't always have to be like that though, it depends on the recording (and how tired you are haha!!) 😉

@Piranha1 3 жыл бұрын

I like your content and how calmly you explain things. You just got a sub!

@SaraCarterSimplyMixing 3 жыл бұрын

Welcome aboard!

@juanchis.investigadorsonoro 3 жыл бұрын

I force myself during some times to work with less fancy solutions, but most often I've been using the key input to filter the compressor response with the same signal. That way I don't lose information, change balance and can use the compressor completely as a shaping tool instead of peak reduction. Thanks for great detailed videos.

@SaraCarterSimplyMixing 3 жыл бұрын

You're very welcome!

@russisaac813 3 жыл бұрын

So easy to follow your tutorials. I actually learn things and get more experimental after watching your vids, many thanks.

@SaraCarterSimplyMixing 3 жыл бұрын

Thanks Russ, that means a lot 😊

@joshadams9965 3 жыл бұрын

I just discovered your channel yesterday afternoon and I just wanted to let you know that your videos are very helpful. I have been writing and recording my own music at home for the past 6 years but never really got into the technique of mixing/mastering because I was having fun just doing that as a hobby. I have about 15 songs that I am happy with and decided that I needed to learn how to make them actually sound commercially acceptable since I have enough content for a album. Since then, I have become almost obsessed with learning this craft. I started about 2-3 months ago and have yet to produce a mix that I am happy with but I feel I am getting close. I have watched many different channels who have offered many different tips and tricks and some of them have helped but some of them have not. I am really liking your teaching style and the English accent makes it so much more soothing and calm to listen to while I am at my paid job. Keep up the good work and I will continue to watch your videos and take your advice when it is applicable to my genre of music(rock/heavy metal). I have one quick question if you know the answer and wouldn’t mind answering it for me. I really like using the Waves SSL E Channel because of its multi functional ability. It helps save processing power on my computer(that really needs an upgrade but can’t I afford it right now). Do you know if the compressor on it engages before or after the eq and can you change the routing of it so it can still be used as a before and after compression EQ?

@SaraCarterSimplyMixing 3 жыл бұрын

Welcome to the wonderful world of mixing! The Waves SSL E channel is a great plugin, the compressor defaults to pre-EQ unless you press the CH OUT button, then is switches position. The Split button will disconnect the filter section only, so you can just move that on its own if you wish. Hope that helps!

@joshadams9965 3 жыл бұрын

@@SaraCarterSimplyMixing Yes that helps. I was trying to figure it out in the manual and that’s what I was thinking it was showing in the charts but I wanted confirmation from an professional. Now it’s time to go back and hit that CH Out button on any EQ that has boosts and compressor engaged and see if that makes any difference in my tracks. Thank you for the answer and response! I look forward to your future videos!

@cordcla 3 жыл бұрын

Thank you for your advice. Really appreciated it!

@SaraCarterSimplyMixing 3 жыл бұрын

You're very welcome Claudio, I'm pleased you like the video!

@marcelbr815 2 жыл бұрын

Your videos are absolutely brilliant! Thank you!

@SaraCarterSimplyMixing 2 жыл бұрын

Thank you so much! Glad you like them

@jetdeleon 3 жыл бұрын

What a fantastic video! This is the first of yours that I've seen and I subscribed right away. Thank you for your generosity and fine delivery of content. I look forward to viewing more of your videos.

@SaraCarterSimplyMixing 3 жыл бұрын

Awesome! Thank you!

@richardgordon9939 Жыл бұрын

sara, your content is really good. i have just subscribed. keep it up. greeting from south london

@SaraCarterSimplyMixing Жыл бұрын

Awesome! Thank you!

@louplarsen56 2 жыл бұрын

For me : EQ (Fab Filter Pro-Q3) in first for cleaning, Compressor (Waves SSL G-Master Buss Compressor) in second, and in last position an analogic EQ (Waves VEQ-3)for color sound. It's my chain for E-Guitar and many track.

@SaraCarterSimplyMixing 2 жыл бұрын

Sounds good!

@That1Guy 3 жыл бұрын

This makes perfect sense. Thanks for explaining so clearly.

@SaraCarterSimplyMixing 3 жыл бұрын

You're very welcome!

@SatishKumar-yv3ke 3 жыл бұрын

Would love to see your approach towards delay throws and reverb throws.

@SaraCarterSimplyMixing 3 жыл бұрын

Coming soon!

@SatishKumar-yv3ke 3 жыл бұрын

@@SaraCarterSimplyMixing Thank you.

@darrenmusatto8426 3 жыл бұрын

Great video!

@SaraCarterSimplyMixing 3 жыл бұрын

Thanks!

@orebromusik9080 3 жыл бұрын

Great video!👍

@SaraCarterSimplyMixing 3 жыл бұрын

Örebromusik, thank you so much :)

@SethKelley 3 жыл бұрын

First video I've watched from this channel, but phenomenal job! You really nail this niche of demystifying mixing/compression, and your website is clean and well put-together. You've got my email and sub, I appreciate your channel; keep on the good work :)

@SaraCarterSimplyMixing 3 жыл бұрын

Seth, thanks for watching, subscribing and for the feedback!

@danielacosta6966 Ай бұрын

OMFJG!!! I only see your smile! 😍😍😍😍

@TenthElementGraphics 3 жыл бұрын

My philosophy is EQing can either clean a signal or shape the tone. You want a clean signal going into your compressor, so throw an EQ (specifically used for cleaning the signal) before the compressor. Then use an EQ to shape your tone after the compressor. If you're signal is already clean then you don't really need the one going in, but realistically there's almost ALWAYS a little cleaning you can do if you have anything coming in from a microphone or something. So the only time I see me not using that initial EQ is if I was just like, compressing a digital instrument or something.

@SaraCarterSimplyMixing 3 жыл бұрын

YES! Perfect! Thanks for sharing, we have the same philosophy 😃

@jesusmarrero5580 3 жыл бұрын

Great video,thanks for your efforts ,can you give some examples?

@SaraCarterSimplyMixing 3 жыл бұрын

Yes, there'll be a future video on that. Thanks for watching!

@truvybzentertainment8201 2 жыл бұрын

Nice video

@SaraCarterSimplyMixing 2 жыл бұрын

Thanks

@unclemick-synths 3 жыл бұрын

Yep, my philosophy too; fix - compress - enhance.

@SaraCarterSimplyMixing 3 жыл бұрын

Yes!

@barneycarniperfitz1915 3 жыл бұрын

Beautiful explanation of this issue. Is that really an R. Crum poster on the wall?!?!?!

@SaraCarterSimplyMixing 3 жыл бұрын

Thank you so much 😊. No, it’s a Sylvia Massy signed print 👍

@viorelursu564 3 жыл бұрын

Why not before AND after the compressor?! :)

@SaraCarterSimplyMixing 3 жыл бұрын

Why not indeed! Totally valid thing to do and I do it often, thanks for watching!

@jupimakertv3341 3 жыл бұрын

Full vocal mixing please

@SaraCarterSimplyMixing 3 жыл бұрын

Ok, thanks for the feedback!

@tendingtropic7778 11 ай бұрын

great video: what about saturation plugins. where in the chain should these be placed?

@SaraCarterSimplyMixing 11 ай бұрын

anywhere you like, wherever they sound good to you! 😁

@MoonhareStudio 3 жыл бұрын

Apologies if slightly off topic but I hear a lot about the high energy ultra low frequency 'rumble' (below 15-20hz) adding up in a mix even though it's actually inaudible, even on studio monitors. In your opinion are there any dangers or disadvantages to sticking a hi-pass filter on every channel, regardless of other later EQ or compression moves, in order to avoid this issue?

@SaraCarterSimplyMixing 3 жыл бұрын

I actually use a steep hi pass filter at 20Hz on all my main sub groups before they reach the mix bus and it actually gives the impression of a more weighty low end (IMO) especially on drums. So try it and see!

@workoutsontwitch1687 3 жыл бұрын

I saw this technique called emphasis deemphasis where you boost with an EQ into either compression or saturation, then after the signal cut the same frequencies. Im curious I am just trying to grasp my head around this. If you were to boost into a compressor, that means that you are attenuating that part of the signal more correct?

@unclemick-synths 3 жыл бұрын

That's right. It's how Dolby works to reduce tape hiss. Boosts and compresses the highs on the way to tape then cuts and expands the highs on the way from tape.

@workoutsontwitch1687 3 жыл бұрын

@@unclemick-synths thank you

@dpinskey 3 жыл бұрын

I usually eq prior to compression to avoid pumping. But some EDM artists might like this effect and can use side-chain compression prior to eq to trigger other effects elsewhere in the signal chain such as boosting a bass note for that pumping EDM bass or ducking a frequency where you can trigger the eq on a bass instrument to be ducked by something like a kick drum so that the bass dips and the kick pops through. I do have a question now that arose while thinking about signal chain and using compression inserts on an analog board where the channel strip has eq built into it: is the compression insert pre or post eq? I have to go find out now.

@SaraCarterSimplyMixing 3 жыл бұрын

Pre or post EQ? Yes, there is normally a way to switch them around but it depends on the board. The EDM mixers use all sorts of tricks to create sounds and manipulate them. Amazing what can be done!

@arjunghoshal7042 3 жыл бұрын

if the audio sound is dirty and needs to be cleaned, if it needs subtractive EQ, then would it be wiser to go for the surgical subtractive eq first and then compression?

@SaraCarterSimplyMixing 3 жыл бұрын

That's the way I do it. I remove with a clean EQ first like Fabfilter Pro Q3 or a stock EQ.

@arjunghoshal7042 3 жыл бұрын

@@SaraCarterSimplyMixing thank you :)

@specialbeat 2 жыл бұрын

I prefer to insert eq first for the reasons you give. Can I ask though, what would the difference be to insert two separate eq's with cuts or boosts different on each one or to have one eq with two cuts or boosts? Hope that makes sense. Thanks.

@SaraCarterSimplyMixing 2 жыл бұрын

No difference really, possibly some slight phasing but nothing to worry about.