Excellent review per usual. I’ve been road and mountain biking for over 35 years and have own many multi tools, including the original “Cool Tool.” As you mentioned, the Swiss Army style multi tool isn’t the most useful in the field. So, I started looking at replacements such as those from Silca, Spur Cycle, Blackburn, and Topeak, among others. After all the research, I settled on the Wera Bicycle Set 1. They’re a high end tool maker (Tool Rebels) from Germany that recently began packaging their existing tools into bicycle specific sets. I think there’s like 7 or 8 in total but, the one to get is the Bicycle Set 1. The first thing to do with this set is, ditch the extension and pick up Wera’s Joker self setting spanner in XS. It’s an awesome set up with the mini Zyklop ratchet and XS Joker for backstopping all the nuts and bolts found on bike racks, lights, basically all the stuff that bike packers use. The price is a little steep but, nothing more than tools from Silca or Spur Cycle and significantly more functional. I can’t wait for my bike to break down now.

Crank Brothers M17 is probably the first multi tool I ever bought when I first got into cycling. Still my go-to

I recently bought the Silca T ratchet and I love it. I managed to fit a chain tool in the case and I even take it on my motorcycle as its so well made. Great video.

I’m old school. I use the good old craftsman 1/4 ratchet and went through my bike and found the 1/4 bits that fit my specific bike to do all the repairs if needed. The bits all also replaceable.

I'm really liking Blackburn Big Switch. It's a T handle style can use in either direction when need more torque for axles. I even like using this for home bike maintenance. I think I am done with folding tools.

I carry that same Topeak tool. It should be noted that I did break the rachet trying to remove a pedal, but Topeak replaced it no questions asked. I now carry an 8mm allen key as well (courtesy of Ikea). I also have the chain breaker/spoke key half of a Crankbros F15 and the Wolf Tooth Pack Pliers, but I think I'm gonna upgrade to the new pack pliers though, as I like having two tools on trips. Great video!

My toolkit consists of: - a regular set of allen keys - torx key - short screwdriver with two bits - little plyer - chain breaker i took off an old multitool (includes a spoke wrench) - valvecore remover - Tubless repair kit & small bottle of sealant - milkit tubeless bosster (doubles as a water bottle) - tube repair kit and inner tube - spare chainlinks - spare shifting cable - pump - a few spare bolts

I wonder if a bike manufacture could rationalise bolts down to, say, 3 Allen key sizes and simply reduce the number of tools required? I’m sure some of the diversity is not really required. Maybe when reviewing bikes for bike packing you could highlight the number of tools to cover 90% of trail side repairs?

I used to carry Fix-It Sticks before they got stolen. I was rather impressed with how versatile and durable they were, I may have to order another pair :P

it’s so hard for me to listen to the American “Mull-Tai Tool” pronunciation over and over 😂

Crank Brothers M17. It was my first multitool that I bought when I started doing long mountain bike rides. I may try out a ratchet set up some day.

M19 with pack pliers and others essentials for two bikes then for commuter fixed/ss one of those multi tools that’s hide in a bottle cage plus a 15mm!!! Great video I like the ratchet ones i might try one of those

I'm using the SYNCROS Greenslide 11CT Multi-tool. It's great and it has a pretty smart design. It's also long enough to access annoying bolts :)

I always carry the Crank Bros M17 and Leatherman Squirt. Both have served me well on many occasions.

I carry a crankbrothers f15 "unisex" with the magnetic case, wolf tooth quick link pliers (old one, not the multitool), 2 plastic tire levers and a leatherman in my standard kit, plus a tubeless kit that lodges in bar ends if I ride tubeless, a set of patches, one or two spare tubes, some tape. For long distance I add super glue (actually very handy to repare a tire), a sewing kit, spare cables and pads. I'm considering taking a ratchet tool for multidays rides since having a bigger leverage can be usfull.

I have a Topeak Hummer 2 that I always carry with me on my bike. For EDC use I have a Leatherman Wave +. When I'm bikepacking I'm bringing them both with me and that way I can fix just everything.

Crankbrother M17 love it.

The first multi tool I ever had was the Cool Tool. It's the only one I've seen that has an adjustable wrench. It along with the Giro Pocket Rocket? were stolen and I switched to the Alien II. Back then what you needed was simpler but also a larger number of them. Newer multi tools are so much better constructed and lighter since for most repairs you need so little and for bike packing situations you're pretty much always going to be supplementing your tools with some weirdly specific ones that are difficult to find as a multi tool (e.g. BB and/or cassette tool for certain disc rotors, masterlink breaker if you don't carry Wolftooth's version, …). Overall, its pretty cool to see how much and how little multitools have come. So many choices for so many bicycling situations: a quick adjustment on a short ride to a multi day self-supported off-road adventure.

Crank Brothers M17/19 as bike specific tool and Gerber Dime Mini on my keys for knife, box cutter, pliers, tweezers, etc. I also have the Silca T-Ratchet but use it more at home than on the bike. The one thing I'm wanting is the chain pliers from the Wolf Tooth tool as I've struggled to split that link before out on the road.

I think il compile a bunch of singular tools and keep adding until I can do most things. Thanks for the review 😌

I recently got the wolf tooth encase system. While it's great for leverage the parts can be easily dropped and its hard to easily find the Allen key you need without taking them off.

I have many multi-tools, but the one I keep using isn't really a multi-tool at all - it's an old Park tool pack that is essentially a small tool wrap that holds their small chain tool, a couple of tire levers and the dog-bone tool they sell. And whatever else I can stuff into the wrap - like a Wolf chain link tool, a tubeless plug kit, a valve tool, and a tire boot. I have replaced the dog-bone tool with a custom assembled 1/4" drive ratchet and bit holder with various bits my bike uses. I do like the new Wolf tool. I may look into that. One of my bikes also has a One Up steerer mounted tool, but mainly because it came with a used fork I bought.

Crank bros m19 has served me well for at least 7 years. I do like the ratcheting style ones though.

I use a Toppeak AlienII and few normal torks that the tool doesn't have and my bike has. bevore my bikepacking trip I always check if I can open all bolts with the tools. I removed the chainbreak from the AlienII to save some weight because I have a belt drivetrain

I started working in Industrial Bridge painting and one of the best multi tools for that was a leather man. I’m a GC now and I do t love a tool more than my Wave. Leatherman offer lifetime on the tools if you break it. The Wave is my go to and if you pair it with Rae Gear sheath you got yourself a hex bolt tool (although very limited). Now to really make it useful a bit kit is needed along with the magnetic holder by RaeGear. I wear these around my belt so I always have in arms reach. I just recently got a new bike and when my suspension started knocking, I just pulled out the wave, threw a bit on it and tightened it back up. It would take me forever to write all the other things that this tool can do around the house and during the construction of an entire home but I’m It can do a lot of things on the bike as well so I don’t have to spend any more money. I do need a torque wrench.I’m having trouble deciding which landed me to this video somehow. Any suggestions are welcome. Range need to be min 2nm and maybe up to 30nm

The crank brothers f15 is my favorite multitool I never leave the house without it when I’m going on a ride

I am using Crank Brothers M17 with wt "classic' pack pliers - it works for almost all needs what i have during the rides(except flat tires ofc). New 8 bit pack pliers from wt looks nice too! But seems unlogic to buy it now, when i already have Crank Brothers tool. Would be nice to see also video from you about dynamometric tools, think a lot of ppl are using them at home(or thinking to buy).

I still have a Topeak Alien which I bought more than 20 years ago. Talk about sustainability :-))

I've used an CB M19 for years now. No complaints. However, I have had my eye on a Blackburn Big Switch Ratchet. I do like having the bits so I can pick and choose which bits I really need. Also, the bits in that tool are not proprietary, so if I lost one it would not be hard to find a replacement.

nobody has mentioned the uniche tools. you should check them out

Topeak Hexus X and Crank Bros M17/19 are my favorite

I love my bar end torx drivers and chain breakers. Although I've only used the breaker a few times, all and all these have saved my butt multiple times. Also, torx work way better than Allen's and fit all of them without stripping.

Really interested in that Wolf Tooth kit, looks like it has a lot of leverage. Looks like I need to pick up a CB M17 too. Personally right now Im using a little syncros tool day to day. Easy to use and bits are a good length but it lacks some very important bits. On longer rides I usually bring some full size tools as well.

Blackburn Tradesman is fantastic

I carry a PB470 Swiss Tools bit set + Park Tools CT-5 chain breaker + Knipex mini wrench pliers in a small bag. Which is virtually the same weight as the Alien 3 at 272 grams vs 273 grams for the set of tools. Though I usually toss the Swiss Tools tyre levers (10 grams) and add a pair of blue Schwalbe tyre levers. Those things are brilliant. Granted, the Knipex are already more expensive than the Alien 3 but they are very versatile since they can fit anything between 0-27mm. So mounting pedals, straightening disc rotors or just clamping bolts is really easy with those. Oh and a pair of those first gen Wolftooth pack pliers for everything else chain related.

I like a simple fold out tool with all the Allen and maybe Torx you need and perhaps screwdrivers but that's all and with good reach. Say, the Crank Brothers M10 for example. The small multifunction Pedro's chain tool as a separate item that doesn't invade my fold out tool. It has some spoke wrenches built in. I think it works better as a chain tool than most of what multitools provide. Finding a little pocket sized bag with a zipper is well worth it so you can add what you need like maybe a flat 8&10mm wrench for example rather than trying to have every tool fold out of your multitool. I have a dog bone wrench for example that fits many different nuts. Or just get the thin wrenches you think you'll need. I find a lot of the everything in one tool, tools pretty awkward to use and they usually leave something out that I want anyway... I think a fold out tool is great, if you don't try to get every function jammed into it. I like having a little bag of tools so if I want to add say a tiny chain pliers, or whatever, I can...or a single Torx key or wrench I can. That said I own a Skeletool by Leatherman and I might buy the bit extension for it and the bits for my bike. That way I get a pretty impressive pliers, knife and bit driver that clips to my pocket. I like the idea of the bit extension that uses standard bits rather than Leatherman's proprietary bits and you get long reach and a lot of torque with it. There are some folding tools and knives that have a bit driver that could be considered too.

I've owned a Topeak Ratchet Rocket Lite, and as mentioned in this video, yes, the bits can get lost (I'm currently missing my 2mm bit), so I recently decided I want to get away from tools with lots of separate pieces that can get lost on the trail and settled on the Crank Brothers F15 which has all the customary hex bits plus T25 torx, and a Philips and flat head screwdriver in addition to a great chain breaker that works as well as a dedicated tool. I tried the M17, but the chain breaker was simply too hard to use

My favorite multi-tool is Daysaver Essential8 & Coworking5 Bundle.

My favorite multi tool is is my combo beard trimmer/comb.

The bit driver sets can be bought as generic tools for like 10 bucks, but some of these folding tools look pretty sweet.

Park Tools MT-1 + leight weight spokewrench + light weight chain breaker. Im replace all torx bolts with hex and use Wipperman chainlinks. For short rides im only bringing the MT-1.

I had the specialised multi-tool that goes under your drink bottle holder it's rubbish I forgot I'm going to alien 2 in the garage and put in my pack thanks for a great review

Silca T-ratchet + granite chain breaker in the handlebar

I use basically a Topeak NTX + (always on my Sling bag) and, also carry a Blackburn Tradesman Multi-tool on the bike (inside the Topeak Ninja Pouch). That's it, simple & neat 🤙🏻 See ya, blue skies 🍀📷

I see Alan Harper got into biking, good stuff!

Check the Super T Handle Metric set, a compact new design that solves the rotational problem when torque is not needed (at Amazon).

How about checking out the knipex 5" plier wrench.?

Logan is spot on. There is no single perfect tool. So I carry two I find all the multi tools with chain breakers are to fat and unweildy. So I go with a Spin Doctors Bare Bones multi, which is compact and covers everything on my bike. I also carry a little Topeak chain breaker. I've only needed a chain breaker 2-3 times in about 30 years of riding, but when I needed it, I really needed it. Those two tools get me through most things. They're also fairly cheap and not too heavy. I may get an adaptor to turn my 6mm Allen into an 8mm. Then I'll be loaded for bear!

CB M19 Rocks! It just has the length in the tools. Coached HS MTB and the little OEM tools that Specialized and others merchandises at the shops when parents buy bikes,(for their kids) are always too short. Question? - I am riding a 29" bike. As a spare tube, which size do you bring? Do you bring a smaller size like a 27.5? Does it even matter?

Blackburn wayside which is similar to the crank brothers but with almost full size Allen wrenches

3:58 A thru axle is not an axle in the sense that it takes radial load. It is just a glorified quick release and the radial loads are transfered via clamping force into the hub. So tighten your axle at least to 10-15Nm. With the included levers this is often nearly impossible unless you crank down as hard as you can.

If you lose bits on those rachet style tools, it's not a big deal, any home improvement place sells them, and they're cheap, plus if by chance the rachet tool doesn't have a bit that you need, you just go buy one at the home improvement place. I got a Lezyne Torque drive tool, and it did not come with a couple of bit sizes I needed, so off to the Improvement place and found them, now they're in my Lezyne kit.

If you use a chainbreak tool all the time then you need to look at upgrading the chain.

Logan looks like he'd pull that Mineral tool out at a camp and smoke from it.

Using topeak hexus x.

Mine would be Topeak Hexus X

Blackburn(with loose allen keys) still the best

Wolf tool not great. Magnets that hold it closed fell off. The one holding the metal unclogging tool as well. Finally it’s not coated so it’s soon full of rust if it’s in contact of moist or water.

In 30yrs I have not found a better multi tool than the Park IB3. Everything you need, nothing you don’t.

Check out Rides Of Japan, he made his own multi-tool.

👍

So the Wera Bicycle Set Torque 1, 16 Pieces wouldn't be a contender to take along E-Biking? Too bulky & missing essential tools? I just detest the thought of using tools made in China or Taiwan.

Is this the only video Logan has ever been on?

M19 all the way

How many chains are you breaking?

No oneup?

You don't test tools BEFORE taking them to the trail? Amateur move.

What no Cool Tool? :0