What's the Deal with Shiplap? Fake Shiplap vs. Real Shiplap and How to Make it

Рет қаралды 38,203

Жыл бұрын

Shiplap may seem like a new fad, but it has actually been around for ages. It serves a very real and practical purpose and in this video, I explain what that purpose is and how to build it. Also, did you know that there are 2 different types of Shiplap? In the video I will also explain what they are and how to build each.
#fixerupper #shiplap #diy
Leave me a comment and let me know your thoughts.
Thanks for watching. If you liked this video be sure to subscribe and check out the other videos on my channel. kzfaq.info?s...
Contact: dave@diywithdave.com
Here is a list of some of the tools that I use in my DIY projects:
Kreg Pocket Hole Jig - amzn.to/3p7TcRG
Kreg Clamp - amzn.to/3pa12ug
Kreg Concealed Hinge Jig - amzn.to/3G7Dtdh
Kreg Shelf Pin Jig - amzn.to/3p4AKtZ Dewalt Cordless Drill/Driver - amzn.to/3eE1qvX
Dewalt Compound Miter Saw - amzn.to/2I8M1s1
Sears Craftsman Jointer - vintagemachinery.org/photoinde...
Craftsman Jointer Replacement Blades - amzn.to/38mAj7w
Titebond III Wood Glue - amzn.to/3k93eyo
Dewalt 735 Thickness Planer - amzn.to/2IfKujC
Wen Track Saw - amzn.to/3lbSJNY and Track - amzn.to/314617W
Bosch Jig Saw - amzn.to/3rbG3dV
Japanese Pull Saw - amzn.to/3CZfMSh
Irwin Clamps - amzn.to/3CVdBiI
Shaker Rail and Stile Router Bits - amzn.to/3DWGuMM
Bosch Benchtop Router Table RA1181 - amzn.to/314kHnw
Bosch Mini Router - amzn.to/3HVdibb
Porter Cable Router - www.lowes.com/pd/PORTER-CABLE...
Plunge Router Base - amzn.to/3nTK2tx
Rockler Dovetail Jig - amzn.to/3nY7mqa
Porter Cable Brad Nailer - amzn.to/3lcwmrO
Please note that some of the links above are affiliate links and at no additional cost to you I may earn a commission. Know that I only recommend products and tools that I’ve personally used and/or believe are genuinely helpful, not because of the modest commission I may receive should you decide to purchase one of them. Most of all, I would never advocate for buying something that you can’t afford or do not need.

Пікірлер: 49

@design2build Жыл бұрын

I don’t think it’s all the rage that it used to be, but it’s not going anywhere. It’s a timeless look. I love using it vertically in my remodels.

@BonjeaniRobbins 7 ай бұрын

Love the playhouse, Great job!! I love shiplap look not the price. Thank you for this video it was so informational :)

@ricksrealpitbbq Жыл бұрын

Shiplap also looks good running vertically especially used as wainscoting. Really enjoy your channel 👍

@DIYwithDave Жыл бұрын

Thanks!

@amishterrorist17 Жыл бұрын

@1:06 Pretty sure the image of the red home was utilizing Bevel lapping instead of Shiplap; you can see a significant amount of the bottom of the siding. Shiplap has become such a hot style it's often confused with other methods like Bevel or Clapboard.

@noyopacific Жыл бұрын

The hundred+ year-old home we restored on the Mendocino coast 30 years ago has 1X10 "channel bevel shiplap" redwood siding. It was a common siding choice in this area back in the day. We had to replace some of it during restoration. The edge profiles were cut by a local re-saw mill that had the shaper knives to do it. I shudder to think what it would take to try to get that kind of siding today. Thanks for the video!

@DIYwithDave Жыл бұрын

That's great! I wish I could have seen it. Thanks for sharing.

@tomjordan3326 Жыл бұрын

I made some one time using 1/2” plywood cut into 8” strips then cut the rabits on my table saw. It was a lot more work than I thought it would be but my wife and daughter loved it so it was worth it

@DIYwithDave Жыл бұрын

ALL of my projects are a lot more work than I originally anticipate, but you're right; what matters is if the people it is made for really enjoy it.

@wno1043 2 ай бұрын

I did the same thing, but am putting it on the ceiling of our old farmhouse kitchen. I didn't find it to be any trouble at all to make on my table saw with a dado blade. It was easy.

@downhilltwofour0082 Жыл бұрын

I love the kids play house!

@DIYwithDave Жыл бұрын

Thanks!

@dsellmann1811 Жыл бұрын

I have bought a house that was built in 1859. I have begun pulling the paneling off to reveal amazing dark wood ship lap. However, one place has a gap/ hole that I need to figure out how to fix. What are your suggestions without having to put ugly paneling back up??

@timhalcomb4041 Жыл бұрын

Thanks for sharing we have it in a bedroom and are going to put it in the living room as a accent wall. Have a blessed day in the name of Jesus Christ.

@DIYwithDave Жыл бұрын

Thank you! Good luck with your project!

@5W5Y5 Жыл бұрын

When installing, where do you want to fasten shiplap? Definitely not in the joint?

@peggywest8371 9 ай бұрын

I don't care if it is still trending, I'm doing it. 😅😅😅 thank you for the infrastructure. I learn something new everyday.

@DIYwithDave 9 ай бұрын

Thanks for watching!

@Laguna2013 3 ай бұрын

can I pull off my old yellow stained knotty pine vertical paneling and have it milled into shiplap that I can reinstall horizontally? Come to think to it, why would one install panelling horizontal vs vertical? Thanks!

@mikehenthorn1778 Жыл бұрын

so a double rabbited joint. got it. not sure it is better than clapboard for the outside and no point on the inside.

@LA70S Жыл бұрын

I don't think shipman is as popular as it was but I still like it for utility/laundry areas, finishing off attic spaces and garages.

@ThreeNoTrump_100 Жыл бұрын

I prefer tongue and groove pine indoors, stained or painted. Sometimes I install it at 45 degrees as an accent wall.

@2coryman 7 ай бұрын

The real thing next to a good copy indoors has an appearance of being more solid and of better quality

@moldings_etc Жыл бұрын

As someone who makes true shiplap every week and sometimes daily, it's a great material for walls and ceilings. It's not cheap to make but for the rustic look, people will pay.

@JesseKlaus 8 ай бұрын

I'm building a barn/workshop with a finished 2nd floor. I'm planning to condition the space but I don't want to have to keep it conditioned all the time. Due to this I don't really want to clad the ceiling or walls with drywall. I have a sawmill and plenty of trees. I have a lot of pine logs ready to be used but also need to clear a bunch of sweetgum. Any thoughts on whether or not I could use sweetgum? My studs and joists are in 24" centers. I also have a bunch of sturdy R fiberglass faced insulation panels I had considered putting up first then gluing the shiplap to that, in addition to nailing though that may be overkill. I had also considered putting the sturdy R up first, painting it black, then doing faux shiplap on top of that. Seems like I'd spend a lot of time cutting the laps either with a router or dado blade. Any thoughts are welcome.

@realtyrocks1969 7 ай бұрын

As someone that used to pick up horse shit in a stable I can confirm that nobody cares what you have to say.

@derrickp Жыл бұрын

I just ordered shiplap for my cabin ceiling.

@DIYwithDave Жыл бұрын

I think that the shiplap look is perfect for a cabin. Good luck on the project!

@vlrissolo Жыл бұрын

Thanks for the interesting history! I think shiplap is just a trend made by a trendy show by the trendy chip and Joanna Gaines. Obviously it was something used in Old homes just as here on the East Coast we had what they are now calling skinny shiplap. Would love to learn more about it but what I see is just skinny boards with some type of mud or something to fill in the gaps to prevent the wind blowing through. Doesn't really work after a while lol I lived in a house with it and you could feel the wind blowing right through the side of the house. Anyway, it had its purpose in its day and that day is gone. Now it is a trend that is so overdone it makes me want to vomit. Not that it's bad just that everybody copies everybody else. Folks, use your imagination! There are so many beautiful subtle or dynamic wall treatments that can be used as opposed to shiplap, same thing your neighbor and everyone else is slapping up. Have you all seen the ship like where they just draw lines on white sheetrock? When I first saw that I thought this is ridiculous! I guess I am one of those people who steer away from anything trendy. I would rather have something that I love and is unusual then something everyone else has. Not trying to say I'm better than anyone else by any means feel I might just think differently than the masses. Would love to learn more about why shift lab and skinny shiplap was put in homes. I'm guessing it was an insulating thing that like I said didn't work too well or at least doesn't anymore LOL but please make another video and tell us why! Thank you, enjoyed that

@mikehenthorn1778 Жыл бұрын

ok we have got to be real here , ship lap works because jute was added to the joint that kept the joint water tight. when the wood moved the jute would follow suit and keep it dry ( ok ish earth sauce will always find a way to get in your boat. ) . house and barns would be well protected.

@marktate4466 2 ай бұрын

Putting some up in a bedroom, the seam when you put boards end to end is not real satisfying. Otherwise I like working with it.

@user-em6ie2be7x Жыл бұрын

My neighbor has that stuff on her walls & it's flimsy. Her kids keep pulling it down off the walls climbing on it.

@DIYwithDave Жыл бұрын

Lol. It's probably faux shiplap. I dont think that they would be able to pull off the real stuff. .

@xephael3485 Жыл бұрын

Kids climbing on stuff will wreck anything...

@DIYwithDave Жыл бұрын

Haha... that's true. I have 4 kids and our family motto is "we just can't have nice things"

@pernell4351 Жыл бұрын

We have in our house

@HeliRy 8 ай бұрын

Why do some people put a gap between boards when it’s true shiplap, and some don’t? Just an aesthetics choice?

@DIYwithDave 8 ай бұрын

If it's true shiplap, you don't need to put a space. The space will develop naturally as the wood moves with the seasons.

@silverbackag9790 5 ай бұрын

@@DIYwithDavenot exactly accurate. Nickel gap is a thing.

@jerseyscaler445 Жыл бұрын

Ship lap is on its way out

@xephael3485 Жыл бұрын

1:06 that's not shiplap 🤪

@rogerwhiting9310 2 ай бұрын

Use nickel gap..no nails

@SeaJay_Oceans Жыл бұрын

But I want my Shiplap made from reclaimed fishing boats, so it's really made out of Ships ~!

@DIYwithDave Жыл бұрын

Lol. Good luck! Might be hard to come by.

@SeaJay_Oceans Жыл бұрын

@@DIYwithDave 😀 :-)

@raymondchow8722 6 ай бұрын

Just don't put shiplap everywhere. Similar to a lobster buffet, keep eating and eventually you will get sick.

@Alan-tjj 2 ай бұрын

Good point !!

@Zacharythorsen Жыл бұрын

Jesus Christ died for all of our sins. He died the death we all deserved. He was the perfect one who never sinned once, but he loved us so much he decided to die for us so our sins would be paid for and we can enter the Kingdom of Heaven before God the Father blamelessly. He is the living son of God who wants to know us and have a personal relationship with us. No matter what you have done no matter how far gone you think you are Jesus can and will save you. All you have to do is confess with your mouth and believe in your heart that Jesus Christ is your Lord and Savior. Believe that he died on the cross for your sins and had a bodily resurrection 3 days later. We cannot be saved by our works but by faith in Christ alone. Repent and turn to Christ. You will have joy, happiness, love, and peace beyond understanding.