◀ Kim Ji-woon’s site Wikipedia ▶
Ceramic siding panel types are s14 v16 n16 premium
There are 4 categories, and the s14 nailing type is discontinued.
In the case of ceramic siding detailed drawings, we will send them to you free of charge.
Ceramic siding specifications are thickness 16T width 455mm 3030mm
The pros and cons of ceramic siding are that it weighs 28kg.
The exterior wall cannot be constructed immediately; base work must be done.
You have to do this and compared to stucco zinc panel.
The price is high. The advantage is that it has an excellent design and is easy to construct.
If there is no damage, it can be used semi-permanently or permanently for more than 30 years.
The price per pyeong of ceramic siding depends on the construction situation and product.
As it may vary, please call to inquire.
For information on how to construct ceramic siding, please check the World Building Materials Ceramic KZfaq section.
Ceramic siding is sold at World Building Materials.
We only directly import Nichiha iCube products.
Please call or visit our website.
◀ Ji-woon Kim, CEO of World Building Materials ▶
hello. This is Ji-woon Kim, CEO of World Building Materials.
Today's content was completed at the scene in Janghowon.
If you look at it this way, in the case of signs, they were constructed as is.
The most important aspect of ceramic siding construction is
It is important to discuss signage, electricity, etc. with the tenants before proceeding with construction.
It will be easier if you give a request after consultation.
I can hit the ball
If you look at the top, the rain gutter is also new and finished with stainless steel.
In the case of windows, they are also finished with zinc flashing.
All protruding parts were neatly finished.
The upper part is called thick and covered with thick flashing.
I folded Zinc into small pieces, but the original plan was only to go to Kim Internal Medicine Clinic.
However, the owner here wanted to raise it to the top, so an additional
The work was completed to make the building more magnificent.
Let's take a closer look
Come to the front
This is the front, and the front is also this way.
All windows were replaced except for the hospital on the left.
And the flashing part was completed through ceramic siding construction.
The water gutter extends all the way to the bottom.
You can think of it as a pipe through which rainwater enters and flows down.
Also on the right side
A water tank comes down from the top of the clinic to provide drainage.
The flashing part is also in good shape.
The windows are well wrapped and come out well.
It's a new building
I folded and cut the corners and finished them off with caulking.
If you look closely, you can see the seam and there is a double-edged joiner.
The caulking has been fired.
The interior was completed with woodwork on the top and a ruber.
The sash is all new too.
I replaced it
As you can see, through sash and woodworking work,
A product called Spruce Ruba.
hold on to the wall
It's finished all the way
If you look closely, it looks like this was done with Ruba.
This product has dense knots because it is spruce ruby.
Fold the zinc flashing
The window side is all finished.
In other parts, the ceramic siding construction has been completed.
Because everything was raised to the top.
Finished with neat flashing work up to the top.
This is the warehouse we first came to.
This is the space I took when I first introduced it.
Because water leaked in, after waterproofing, we finished it again with panels.
The roof was old, so it was replaced and completed neatly.
It was updated because it was used as it is and reinforced while being used.
You have to align the caulking surface in this way so that it is pretty and consistent.
It will be directed
If there are too many seams, it will not look pretty, so we
I set the baseline first and then lowered it as is.
If you look closely, you can see the seams.
It's also a good idea to make it straight and pretty by following the lines.
It is one of the technologies
In this way, a much grander building was completed.
I will tell you the overall construction sequence.
When constructing the first ceramic siding, tiles or
After removing the uneven part, the wall is fixed through welding work.
Level it up
Then, you can think of it as attaching the ceramic siding on top while attaching the panel.
When you first start, you can think of it as the method of placing the starter and inserting it as you go up (clip method).
And when connecting siding to siding
Connect through a double-edged joiner.
It is finished with silicone caulk.
Then, the window is finished by installing the frame and folding the flashing.
Water enters the existing panel or ceiling area to be strengthened.
Through caulking in parts or for interior
through woodworking
You can also attach things like ruba.
#construction #ceramic #siding #building materials