Out of all the set up pool videos I've researched, I think yours is the most informative and helpful. I agree about the 2" foam board.
@JaredsShop Жыл бұрын
Thank you!!
@JerryNicolato2 жыл бұрын
This how-to video is extremely well produced and so very helpful. Thank you so much for taking the time.
@JaredsShop2 жыл бұрын
Thank you for the kind words!!
@gavinthor44792 жыл бұрын
Thanks for posting this. My pool liner developed a leak during winter, and then the side blew in during our recent wind storms. I'll need to basically take it down, clean all the sand out of the channel and start over in order to get the side back down in the groove properly. This video was helpful.
@JaredsShop2 жыл бұрын
Thank you for the feedback. Good luck!!
@prop14662 жыл бұрын
Good info! I might be getting a "free pool". And I have never been involved with disassembly or installs. So this was a great help. Thank you.
@JaredsShop2 жыл бұрын
That’d be awesome! Thanks for the feedback and good luck!!
@chrismcconn20142 жыл бұрын
Taking one down tomorrow!! 🤞it goes this easy!! I’ve already found some screws stripped out, I’m hoping I can get them out easily. Thank You for the help brother
@JaredsShop2 жыл бұрын
You’re welcome! Hope it all worked out.
@robertoapplewhitejr15852 жыл бұрын
I purchased a used pool this is very informational especially the floor board and the curve pieces .
@JaredsShop2 жыл бұрын
Great. Thank you for the feedback. I hope all goes well.
@virginiakassay85282 жыл бұрын
Thanks so much for all the great information you shared. I have to replace my pool liner and this gave me a head start on the process.
@JaredsShop2 жыл бұрын
Very good. Thank you and good luck!!!
@ginamartin718 Жыл бұрын
Giggling at your Blah Blah Blah lol, very delightful. Also, thanks for speaking my language:) I get it everything you've said. You are a very good teacher in that you are very discriptive explaining all the nuances. Also, I giggled at your wife (I believe) chasing after the doggie, and the doggie wanting to be a part of the action.
@JaredsShop Жыл бұрын
Thanks!! It was definitely a family affair. 😁
@vab007vab Жыл бұрын
What an awesome step by step explanation.
@JaredsShop Жыл бұрын
Thank you!!
@RhondaSueNelsonWatson-fu1pd Жыл бұрын
As well, thank u for sharing your after thoughts, helps in purchasing products for installation of our pool.
@michaele1975 Жыл бұрын
These videos are great! Thanks for sharing your effort and knowledge here. Very helpful. I hope mine goes as good.
@petehanratty9503 жыл бұрын
Nice job, hope you guys are enjoying the water,
@JaredsShop3 жыл бұрын
Thanks! We are on occasion.
@pattiromano61242 жыл бұрын
Very helpful. Maybe we will try it on our own. Thank you.
@JaredsShop2 жыл бұрын
You’re welcome. Good luck!!
@dem97253 жыл бұрын
Another awesome video! Keep up the good work!!!
@JaredsShop3 жыл бұрын
Thank you!
@karma48722 ай бұрын
My pool is 15 round and going on my usual cement slab like last year
@JaredsShopАй бұрын
@@karma4872 can’t beat a cement slab.
@normbastien3050 Жыл бұрын
I am at the stage to round the bottom rail of our 27' above ground pool I have measured the radius to the inside of the bottom rail, the slot for the wall and the outside of the rail. The radius on the inside is 13'4", at the slot is 13"4-1/2" and the outside is 13'5". The radius should be 13'6" for a 27' pool, should it not? If so, when I try 13'6", the rail segments are a long way away from the small tab in the rail connectors. Also, when I laid the bottom plate blocks, I placed them so the rail will cross the midpoint of the block, at 13'6" but the rail is way out of centre to the point of sitting on a few blocks right at the edge. I also laid 3 evenly spaced bricks in the gap between each bottom plate. I can easily adjust the bricks but the rail will not be centred at 13'6". Will it be a problem to use 13'4" or 5" in stead of 13'6"? I just received my mason sand and want to get it laid and levelled ASAP. Any help would be appreciated.
@JaredsShop Жыл бұрын
I would not be concerned about 13’ 4” or 5”. Your bottom rail sections don’t need to be touching, but they shouldn’t be too far apart either. I also would worry about hitting the center of your blocks. As long as they are on a good solid base, you’ll be fine. Their purpose is just to help keep the posts from sinking and spreading out the force a bit.
@tanyawashington81242 ай бұрын
Great Video
@JaredsShopАй бұрын
@@tanyawashington8124 Thank you!!
@karma48722 ай бұрын
Even when I had used a puzzle foam, it did have fine lines and dirt. Ugh. And my pool not set up yet
@sanyadiederichs9822Ай бұрын
Can you do a video on assembling the pump and filter
@JaredsShopАй бұрын
@@sanyadiederichs9822 Mine is already assembled but I should be able to do a video overview showing how it connects.
@maykevin5Ай бұрын
I think just buying a bunch of plastic clamps from Harbor freight and string lines to hold the wall and liner on would be easy.
@JaredsShopАй бұрын
@@maykevin5 The clamps would certainly work. What are the string lines for?
@ErinIngles-tk6iu Жыл бұрын
Hello, your video is great and very helpful. We have just bought our pool and the area where it needs to go is grass at the moment. What do you have under your foam board here? Is it a concrete slab? Thanks!
@JaredsShop Жыл бұрын
It is crushed304 limestone with a layer of limestone screenings on top.
@t.johnson6707 Жыл бұрын
Love your videos.
@JaredsShop11 ай бұрын
Thank you!!
@nikolasvel Жыл бұрын
Excellent video! 1 question for you: The bottom rail the pool wall sits in my set up is plastic and 1" tall. Could I run 2" foam boards all the way under the wall rail and to extend past the outside edge of the support pavers? I am thinking I can cut out the sections where the paver supports would be and level them out with the foam board. I am concerned if I cut the 2" foam boards like you did (within the pool wall) I won't be able to lay the foam cove up against the rail and will be left with a gap.
@JaredsShop Жыл бұрын
It would probably work ok, but let me give you a couple other options. First, before setting the wall, I set my foam inside with just the bottom rail and cut it all when everything was easy to lift and handle. Second, will you be using the angled sticky foam at the bottom of the wall? If so, that will help hide gaps so it doesn’t have to be perfect. I know mine isn’t perfect.
@amypletcher44115 ай бұрын
We had an 18-foot pool, and it was from Walmart several yrs ago. Ot wasn't level when the water tanker showed up, but we had to deal with it for the duration of the summer. My question for you is, did you have well water for the initial bit of water because we do, and it is nasty coming out, so we didn't want to ruin our new pool with discoloration. What would we do in this situation? We are purchasing a friend of ours. It comes with a partial deck, and it is 24 feet x 54".
@JaredsShop4 ай бұрын
I do have a well but only used it to partially fill the pool and spread the liner then called in a water truck. It took so much water that I didn’t want to fill it from our well. I also have a water softener so my water isn’t too terrible after going through the softener.
@lynntucker3778 Жыл бұрын
Also needed to see closer up on the way of taking it down and putting it up
@jessehannah8447 Жыл бұрын
im replacing the liner in my 24' round above ground, im confident in my ability todo this, Do you have any tips or advise? i watched your video when you disassembled a pool that you had bought from a neighbor and i was very impress at how easy you made it look
@JaredsShop Жыл бұрын
If you’re just replacing a liner, you’re already far ahead as your pad is in place, the wall is set, etc. Start by taking the top caps and seats off. Then you can remove the metal plates and liner channel tops one at a time to drop the old liner in. Put the channel back on the top to keep the wall in shape, otherwise it’ll collapse in. You may need to use a metal plate here and there as well to keep it against the posts. Then, do any raking or smoothing that is needed prior to installing the new liner. Make sure you set it out in the sun so it’ll be warm and pliable. Start at one area and remove the channel, put the liner up over the wall, and put the channel back on. Just like removing, this is necessary to keep the wall from buckling. Once you are all done, fasten everything in place. Put a shop vacuum on the return jet to provide suction on the backside of the liner and start smoothing it out. I used water, but this method is a bit easier.
@jessehannah8447 Жыл бұрын
@@JaredsShop Followed your instructions verbatim and I was able to single-handedly replace my liner without any problems. Thank you for you advise and input. After finishing this project I had time to reflect as a I enjoyed floating in the pool that I had just updated .. and I was right after all ……I can do anything lol. Thanks for the assist
@brentoncochran80 Жыл бұрын
Also bought a 24ft pool for my neighbor and after watching this it to gave me the confidence for disassembling and getting ready to assemble 🙏
@JaredsShop11 ай бұрын
@@brentoncochran80 Hope it all went well!!
@brentoncochran8011 ай бұрын
@@JaredsShop it was definitely a learning curve... Just two people definitely not good as we planned lol... However, after restarting and making sure everything was true it went up a thousand times better.... We also recruited 5-7 people at a time including a little children to hold the edges of the the liner lol... Now the other little parts and pieces of just being old and figuring things out has been time consuming/ learning curve... But we have saved thousands during this process
@TheShef580 Жыл бұрын
How many 4 x 8 sheets of foam board did you use? I got a 24’ I’m working on and like the foam board as I used for an intex pool.
@JaredsShop Жыл бұрын
I think I purchased 20 or 22. The square area came out to a little shy of 18 sheets but I knew there would be small scraps and I wanted my sections to be large.
@brentoncochran80 Жыл бұрын
Great question I was just trying to find the answer thank you......
@sidguerra2 жыл бұрын
Hi great video, I also used foam board on my 12x24 entex pool. My foam board was interlocking and I used tuck tape worked well. I will be doing a new round one and was wondering what round size is yours?
@JaredsShop2 жыл бұрын
This is a 27’. I think I’m going to pull the liner at some time and tape the seams more, and maybe even use a different style tape. The liner has pushed into the tape a bit so dirt falls in those lines.
@juliading85824 ай бұрын
so detail! thank you!!
@jlbrooks123 ай бұрын
How is your floor holding up after a couple of years. I'm installing a 21 foot and departing using 2" foam. Does it leave foot marks if someone jumps in?
@JaredsShop3 ай бұрын
It’s been holding up great. Zero indents like sand would have.
@nomadryder43772 жыл бұрын
How has the foam board held up over time? My wife likes the idea of that, just looking for some input on how it has held up before committing.
@JaredsShop2 жыл бұрын
It’s still going strong and I’d recommend it. As I stated in my video, don’t get the style that is pre slit for easy snapping apart. Those stupid little slits collect dirt.
@nomadryder43772 жыл бұрын
@@JaredsShop good deal, i appreciate it. The wife really liked that idea, so i guess its off to Lowe's today. Thanks again.
@JaredsShop2 жыл бұрын
@@nomadryder4377 You bet! Get ready to watch your wallet scream. 😁
@rickbuzzard1859 Жыл бұрын
I was considering using foam board as well, but I was actually going to put some sand over it and sweep it to fill in any cracks or cruise and also just to have a layer of sand over it, what are your thoughts on this?
@JaredsShop Жыл бұрын
It would probably fill the cracks well. The issue with sand is it moves under the liner. Eventually, it will feel bumpy by people walking in it. Now that would only apply to you depending on the thickness of the sand. I wouldn’t go thick otherwise you might as well just use sand as it’s cheaper.
@frostakathetruth Жыл бұрын
hi thanks for the video going to do my pool soon! Would you still go 2" foam over sand if building over dirt thanks in advance.
@JaredsShop Жыл бұрын
I did sand for 2 reasons, first I needed to get the height, second it helps level the ground. You can skip the sand if your dirt is perfect. If it’s not, the foam will deform to match the ground.
@sethwhitmoyer57742 жыл бұрын
Thanks alot for the video!
@JaredsShop2 жыл бұрын
Thanks for the feedback!!
@karma48722 ай бұрын
Cove Pieces, can those be used on a regular soft liner above ground
@jodywaugh71705 ай бұрын
I watched the video because I have a pool to take down and reassemble elsewhere
@JaredsShop4 ай бұрын
Awesome. Good luck!
@gl61252 жыл бұрын
Any advice on an egg shaped pool? Liner pool seam is in the floor of the pool on north and south end of the pool and liner is barely overlapped on the pool wall. We have an overlap liner. What would be the best way to resolve this?
@JaredsShop2 жыл бұрын
Are the legs on paver stones? If not, it will be easier to scoot. You’ll have to drain it and then the pool will slide fairly easily until you get it round. Then start filling it again. You won’t be able to round it when it’s full.
@Zack_Johnson6 ай бұрын
Have you had any issues with someone's heel or object hitting the bottom and putting a permanent dent in it?
@JaredsShop5 ай бұрын
No so far. I think the foam is less likely to dent than sand, although the sand could possibly be pushed back smooth.
@fiftynation2 ай бұрын
Hey man, did your wall return back to normal once it got hot out again or did it stay buckled and you continued filling the next day and the water pushed the debt out?
@JaredsShop2 ай бұрын
It returned back to normal when the liner warmed up and stretched. The liners have a lot of stretch to them when warm. They’re designed a little smaller than the pool so they can stretch and for fit to the installation. You definitely don’t want to continue to fill it if the wall is still buckled. The liner has to be given time to stretch vertically so the wall can return to normal height. Otherwise, you risk tearing the liner or pulling it off the wall and then you’d have to start all over.
@fiftynation2 ай бұрын
Awesome! Thabsl for the quick reply. I was in the same situation as you got my pool setup by 6pm and started filling in the evening. Noticed a few walls slowly start buckling. So I stopped filling. Just wanted to make sure the walls did in fact return to original position by itself or if you had to influence it. Thanks fort he reply 👍
@JaredsShop2 ай бұрын
@@fiftynation You’re welcome! Keep me updated, but they should return to normal.
@fiftynation2 ай бұрын
@@JaredsShop did you tack down your bottom ring while filling your pool?. Wondering If I should unrsck my bottom ring and let the pool self adjust maybe wit would fix the wall buckling issue...
@JaredsShopАй бұрын
@@fiftynation I don’t think anything with the bottom ring would help wall buckling. The weight of the water is pulling on the top and trying to cave it in. My wall was fully seated in the ring.
@tamaraamaral255416 күн бұрын
Did you reuse the liner? Or you had to buy a new one?
@JaredsShop16 күн бұрын
@@tamaraamaral2554 I purchased a new one. Liners should be replaced if moved, unless they’re very new. They stretch to their installation, which won’t be the same as the new installation. Also, they don’t like to be dried out once wet. It’s likely it’ll crack from being dried out.
@tonyarode39352 жыл бұрын
What were the pieces you put around the bottom of the pool called? Our neighbor has given us a pool and we are in the beginning stages of draining it and getting our property ready.
@JaredsShop2 жыл бұрын
Are you talking about the white foam pieces that give the bottom corner a “ramp”? Here’s a link to it. amzn.to/3vQszEU
@tonyarode39352 жыл бұрын
Yes! Thank you very much!
@JaredsShop2 жыл бұрын
@@tonyarode3935 Welcome!
@jessica48852 жыл бұрын
I was just wondering , you guys did not use shop vac to remove air and help get your liner flush with pool wall before putting water in your pool ?
@JaredsShop2 жыл бұрын
That’s correct, we did not. That is another great method. We just used water, which holds the liner against the pool as well. Before the water truck arrived we used the garden hose to put some water in the pool as we spread the liner out and got it nice and smooth. It’s the same method I used for our former Intex pools so I just did it out of habit.
@jessica48852 жыл бұрын
@@JaredsShop oh ok . I was debating putting a new liner in my pool because my beaded liner came off the track , but my pool company was able to get it back on . Next week here in NY were suppose to have close to 80 degree weather so I’m going to let the liner get warm then finish filling the pool with water .My problem started during the winter when I noticed water level in the pool dropping , my liner had two holes in it which were repaired
@JaredsShop2 жыл бұрын
@@jessica4885 I’m glad to hear they were able to get it back on and repair the holes. How much water is in the pool now? You can schedule the water truck for any day it will get warm. A liner will warm and cool within hours. We had our first truck later afternoon/evening and had to wait until the next day to get the rest as the evening temps weren’t high enough. We needed the daytime temps to help warm the liner so it would stretch. If yours still has a lot of water in it the liner is probably still stretched into place.
@basketballcoach91533 ай бұрын
@@jessica4885use boiling water from the stove to pour on the liner then pull it up and tuck it in. Then use liner lock in that spot. Provided that your liner is not real old
@bankerlies6121Ай бұрын
Hook a vacuum will suck the liner to the wall
@JaredsShopАй бұрын
Yep. It works well to get it placed and work out wrinkles.
@davidgootee99152 жыл бұрын
Did you not put in drain, great video.
@JaredsShop2 жыл бұрын
Thank you for the feedback! A drain in the bottom? No I did not. I briefly considered it but I wasn’t sure I needed or wanted one. Even though they are the norm for in-ground pools, they’re not very common in above ground pools, at least not around me. It didn’t have one when it was assembled at the neighbors and I wasn’t sure how it would hold up during the winter. The pool itself freezes over at top and we drain it below the skimmer and return while leaving those open to allow water to drain. I was afraid the pipe may freeze and crack and wasn’t sure how to prevent that. Does the pool you’re assembling have a drain in it? Where are you located?
@keithgoodman79662 жыл бұрын
Thank you so much for this info video. I'm getting ready to do the same. How many sheets of foam board did you use?
@JaredsShop2 жыл бұрын
Thanks! I’m thinking 19-20 but that’s been a couple years ago. Make sure you don’t buy foam that’s pre slit and tape the heck out of the joints.
@keithgoodman79662 жыл бұрын
@@JaredsShop Awesome, thank you! Yes, I remembered what you said about the dirt collecting in those score marks. I am also going to purchase the 2in board and opt out of the sand all together. I was given a pool (26'x48") by my neighbor that is only 2 years old! I am excited and a little nervous about the whole thing but with your videos and some other videos about leveling the ground I'm starting to feel more comfortable.
@JaredsShop2 жыл бұрын
@@keithgoodman7966 Awesome. You definitely scored. Take your time and make sure you have some help. The wall is probably the worst part. Make sure you have a good foundation though. Everything is going to depend on that.
@keithgoodman79662 жыл бұрын
@@JaredsShop Absolutely, will do!!
@Blessd-savingrace2 жыл бұрын
@@keithgoodman7966 did you get the pool set up?
@kristaesslinger9446 Жыл бұрын
Did the cove pieces come with the pool or did you purchase them separately? Could you reuse liner?
@LoLifeFPV Жыл бұрын
How is the foam board under the liner? Holding up?
@JaredsShop Жыл бұрын
It’s holding up real well. There’s not divots or anything.
@Daniel-dp5gi3 ай бұрын
Hi Jared, what id the pool itself sitting on, compacted gravel?
@JaredsShop2 ай бұрын
The legs are sitting on pavers and the frame is sitting on compacted limestone screenings (which is over compacted gravel). I used screenings for the top so gravel didn’t work its way to the top.
@petemuniz44342 жыл бұрын
Hello I will be disassembling a pool 24x52" the name is next I think ..any info on that
@JaredsShop2 жыл бұрын
They all come apart in much the same way. Do you have any specific questions?
@tonyfrattaroli73712 жыл бұрын
tape foam kick boards on your feet, lawn roller sand, light watering 10 min. 0 footprints. How long did the install take?
@JaredsShop2 жыл бұрын
I’m thinking it was 3-4 hours. I spoke with a pool installer and he said you can’t water the sand enough. You have to think about it like a beach. When you walk in dry sand it will move under your feet but when you walk on sand that the water keeps coming over, it’s very hard.
@tonyfrattaroli73712 жыл бұрын
@@JaredsShop Lawn roller pushes rocks down and starts the compaction process. In your case, with foam boards, roller probably not necessary. Anyone using just sand 90% of installs, you would need to use a roller or trial regardless of how much water is applied. Another option to foam boards would be .5 inch happy bottom. One advantage is the bottom is padding feels great but unfortunately most installers use thin wall foam which you can’t feel. Disadvantage is the good stuff is $250 a roll. Shop vac behind the liner before the garden hose eliminates the need to push wrinkles. out. Definitely speeds up the process. Anyways your pool looks great / likely better than most of the “pros” in the pittsburgh area.
@harleymoore27392 жыл бұрын
When will the video showing the sand being leveled be posted?
@JaredsShop2 жыл бұрын
Unfortunately, I don’t believe that video is going to happen. Due to a hardened be crash, a lot of footage was lost. It would be a very scattered video.
@patrickfrankmann93613 ай бұрын
Did you reuse the old liner also?
@JaredsShop2 ай бұрын
No. It was stretched to the old installation and it also dries out fast once removed. They usually crack once they dry out.
@DoingLifeWithMiranda2 жыл бұрын
How long did the disassemble and reassemble take you?
@JaredsShop2 жыл бұрын
I’m thinking it took around 2-3 hours to disassemble the pool. Assembly took most of the day, and that because I took my time not having set one up before. I checked everything several times making sure everything was staying round and wasn’t getting oblong.
@RhondaSueNelsonWatson-fu1pd Жыл бұрын
Did u pour concrete for the pool to set upon.
@sbarton69083 жыл бұрын
Great video! Getting ready to do do this. What size pool is this?
@JaredsShop3 жыл бұрын
Thanks!! 27’
@sbarton69083 жыл бұрын
@@JaredsShop thank you!
@boxingmagik_mexside56332 жыл бұрын
I heard the sun ☀️ was bad when filling up your pool 🏊♀️ when the suns out should be done when the sun is going down
@JaredsShop2 жыл бұрын
It’s the opposite. You want the sun out so the liner is being warmed up so it will stretch. If you fill it when the sun is down and the liner is cool, it can’t stretch and you can collapse a wall as it will be pulled down under the weight of the water.
@tanyawashington81242 ай бұрын
Why do you need a water truck.Why you can't just fill the pool with a water hose from the house water.
@IonizapАй бұрын
Hard to say he could be on well water which has a lot of minerals. Maybe just the ease of filling the pool quickly. Haven't watched all the video while making this comment.
@JaredsShopАй бұрын
@@tanyawashington8124 I have well water and it’s not good on it for a few reasons. One, I want the water clean so I obviously want the water to go through the water softener and I’d have to stop every so often and let it regenerate. Second, it’s very hard on the well. That’s a lot of water to pull out of a well. It can be done but if a well is run dry it can collapse before adjacent water seeps back in. Third, it’d take forever.
@tanyawashington8124Ай бұрын
@@JaredsShop Thank you.I thought I was doing something wrong by using my water hose taking the house water😂😂😂Thank you.
@chef_seth_a_lot36842 жыл бұрын
Jared - did you use a shop vac to suck the liner smooth or just the garden hose and your feet?
@JaredsShop2 жыл бұрын
I just used the garden hose with my feet. I’ve heard the shop vac works well. I just didn’t try it.
@chef_seth_a_lot36842 жыл бұрын
@@JaredsShop thank you!
@amypletcher44115 ай бұрын
Hi Jared, we are getting a pool the same way you did along with a partial deck. Same size, too. We have well water and filled a little kiddy pool up, and it was disgusting. I'm a little concerned about using water to straighten the liner. What kind of water do you have? City or well? This will be our first big pool. We learned from the last one to get a tanker to fill our older 16ft pool.
@karma48722 ай бұрын
What kind of tape please
@JaredsShop2 ай бұрын
I used gorilla tape, but if I were to do it again, I’d use foil tape. I think any rubber or plastic backed tape will stretch down into the seams and allow dirt to accumulate. Foil tape shouldn’t stretch.
@karma48722 ай бұрын
@@JaredsShop I can see that happening. I love that foil tape and use it for everything
@gloriaceres61442 жыл бұрын
Question do the liners dry out, when you bring down the pools?
@JaredsShop2 жыл бұрын
They do and that’s one of the reasons a new liner is recommended. If it’s reassembled quickly you may get away with reusing it but it could split also.
@watr772222 жыл бұрын
@@JaredsShop Hi, when you say split, do you mean upon installation or anytime thereafter?
@JaredsShop2 жыл бұрын
@@watr77222 I usually see it split when trying to unfold it and put it in place. If it survives the installation and fill it should last a little while. It won’t last as long as a new one obviously.
@Cristian-vd1vs Жыл бұрын
How much you charge? I got one job 😢 and I need to know how much to charge
@JaredsShop Жыл бұрын
I did this for myself and do not do it for anyone else.
@danger911upt3 ай бұрын
How much was the water truck?
@JaredsShop2 ай бұрын
It’s been a while so I don’t remember exactly but think it was a couple hundred per truck load.
@danger911upt2 ай бұрын
Great thanks for video
@markm6444 Жыл бұрын
How long is the water hose on the water truck?
@JaredsShop Жыл бұрын
He said he keeps several hundred feet of hose on the truck. He only hooks up what he needs but needs to keep quite a bit since you don’t want to drive a heavy water truck through a yard.
@markm6444 Жыл бұрын
@@JaredsShop Thanks my pool will be about 200 feet from the driveway that's why I was asking.
@JaredsShop Жыл бұрын
@@markm6444 Just ask the water guy when you call to order it, but I bet he’ll have enough.
@tianamarie989 Жыл бұрын
What thickness is the foam board?
@JaredsShop Жыл бұрын
1.5”
@tianamarie989 Жыл бұрын
@@JaredsShop thank you! I realized you said it after I watched twice. We watched the taking down of the pool and just did it. Was literally an hour. Thank you for the video.
@JaredsShop Жыл бұрын
@@tianamarie989 Very nice. It definitely doesn’t take as long as you think.
@christopherstevenadams65217 минут бұрын
I was offered a above ground like u got for 1000 dollars
@heytodd530742 жыл бұрын
Mine is coming down…… thing is 20 years old lol
@JaredsShop2 жыл бұрын
Good luck!!
@kristaesslinger9446 Жыл бұрын
What size is your pool?
@paxtonspeed Жыл бұрын
Foam cove will compress over time. Foam floor will hold moisture under the pool, and cause the wall to rust.
@JaredsShop Жыл бұрын
I’ve seen cove base installed after a decade and still not compressed. New cove often goes in with every liner, but not always. I wouldn’t install a pool without cove. It’s much better for the liner, pool cleaning, the wall channel, etc. No reason not to use it. Walls rust due to all types of issues but I haven’t seen one rust out at the bottom due to foam. Foam is a good bit of work and isn’t for everyone. My pool floor is much flatter than a sand floor though.
@zerozero8761 Жыл бұрын
Прикольно,но для моей пятилетней дочки великоват, поменьше купил,буду тоже устанавливать,но сначала нужно бетонную площадку залить,В России в рекомендациях вылез ролик
@chamillet1955 Жыл бұрын
The robot climbs the wall?
@JaredsShop Жыл бұрын
Yep!! Helps to keep the wall clean, especially at the pool line.
@chamillet1955 Жыл бұрын
@@JaredsShop link it!!! 😂
@JaredsShop Жыл бұрын
@@chamillet1955 Here ya go! amzn.to/3B3C7j7
@chamillet1955 Жыл бұрын
@@JaredsShop thank you!!!
@Dr.Pepperlady2 жыл бұрын
Use flex seal tape
@JaredsShop2 жыл бұрын
Use the tape for where?
@xx_dodosnipershadowevil_xx36143 жыл бұрын
GG +25 mmr
@ahatter20 Жыл бұрын
Would have been better buying your neighbours backyard with the pool...