Some time ago I found a different approach in another vid. A commenter shared this method to check the dishing: 1. Put your wheel on its side on top of two equal supports. I use two identical cups on a level table, under opposite sides of the rime -or tyre if it's on). 2. Then you see how far the axle end is from the surface of the table. You can use pretty much anything to gauge this: stacked coins, other small flat objects will do. 3. When you're happy, you just flip the wheel around and see how far the other axle end is now from the spacers. This will show how different each end is. Then you can adjust your spoke tension to bring them to the same exact distance to the centre of the axle.

I love that u show people to make their own stuff in stead of spending too much money when not really nessecary . Thanks.

I made a dishing tool by cutting cheap 4' level (aluminum I beam shape) i found and cut it to 26" and two 3" pieces then bolted them to the ends and I have a few small 1/4" plywood squares to reduce gap then I just eyeball it. Works on 700 and 26" rims. Works great looks OK too.

This help me a lot... thank you so much really appreciated

Thanks!! This is wonderful!!

Excellent tutorial. Thanks for this. I am sure many others will be interested in this.

This gentleman foregoes profit in the name of helping others. He deserves donations.

just what I was looking for, thanks

Great video🙂

Brilliant!!

Thanks, you just convinced me tu buy a cheap one.

Probably won{t get to make it but thanks for the great tip!

So useful.

now where to get the plastic to do so hopefully amazon or lowes will have these pieces but love your videos on repair for the DIY REPAIR

You don’t need a dishing tool. Just take one arm off your truing stand and check both sides of wheel.

Everything fantastic & what looks to be a great & simple home made tool totally fit for its purpose, only flaw is in showing how to use both tools....theres no need to locate it over the axle or set a 2mm or so gap... simply run each contact flush with rim & axle on each wheel side. You do it with you eye not sound. Graham ProBikeMechanicUK

Neat, simple, and cheap. One thing, probably best not to drill towards the palm of your hand, or any other part of your body.

I wish I saw this video before buying the tool.

I have experienced a weird problem. Even if i dish my wheel perfectly, after installing the wheel, when I give a look from standing behind the bike, it felt like rear wheel is 2 to 3mm offset to one side of the seat-stay or if i look while i am riding, from the upside at that angle i can easily compare it from the seat tube perspective, that rotating wheel looks still offset to one side. While it was centered perfectly with dishing tool. I then dish it using seat tube as a reference point and centered it perfectly in the middle. My bike was a giant fathom hardtail. With 29x2.25 ikon tyre. I don't know if it helps in any way....The frame has a uncommon dropout for a QR hub frame. It has 141x10mm dropout. But came with 135x10mm hub (giant tracker sport hub) what should I do? Does Riding with unevenly dished wheel cause me any trouble in the long run? I forgot to mention, i just gave one full turn of that sided spokes. I mean, though uneven, they aren't super offset.

I made a dish tool out of scrap wood and a few screws. Zero $$.

Maybe I am missing something, couldnt a truing stand do the same measurement? I am asking because I want to center my wheels and consider buying a truing stand. Though, I am pretty I will buy a truing stand nonetheless. Side note, do you have an alternative for the use of a 26inch wheel?

Just wondering why the 26inch wheel not the 700c already available?

Possibly more accurate to just use a section of an old wheel, they are pennies anyway.

That mains pressure rated hard poly pipe (blue stripe) is not all that easy to come by, and rather pricey too. Easier to find anywhere in the world is 20mm or 3/4" nominal pvc pipe (usually white) which can also be softened and bent by a hot air gun in the same way. A propos of your rim low spot jacking tool, which I love, the word you are looking for to describe deformed/metal is "yielded". I'm an engineer but I'm not half as creative as you are sir.

Why does it have to be a bow shaped one? What's wrong with it being straight with two blocks for legs at either end ? Is accuracy the issue here?

Saving money isn't the only reason to do this -- it's fun to admire your own handiwork. I got a book a long time ago for my carpentry projects called _Working Alone: Tips & Techniques for Solo Building (For Pros By Pros)_ by John Carroll.

Poly from Bunnings?

way only to 26 dos it dont work on 20 my diy recumbent trike for two 20 front wheels ?

What is the difference betweeen a 256mil and 258mil Spokes ? A beautiful dish ...enjoy getting some plumbing supplies at The Garden Center, GOTTA value the Do it yourself...Getter ✔ Done

I don't get the purpose of this tool. Can't you accomplish the same task in your wheel truing station? How about a DIY wheel truing station?

Why is Jeremy Iron making these type of videos? :D

👏👏👏👏👏👏💡👍🙋‍♂️🇧🇷

hmm i do not think anybody could bend the pipe ends on equal length and angle. sorry this one is null

Eyeballing would probably be more accurate than this. Not a dishing tool.

Complicated setup