I would love to see a tour of the foundry where the mega square is made!!!

I don’t have the “fancy smancy” dragon skin version, but I still adore mine! Great tools, great videos!

This is the result of a product developed and made by someone who does the work! Not a pencil pusher! Bravo!!!

I bought the mega, monster and magic square when you first released them in the T&S form, then last year or so I bought the aluminum versions of the three. I tig welded all the T&S squares to minimize distortion. All six get used regularly when I doing fabrication work. Great products.

In 2016 I was making Porsche brush guards and made a right angle tool off the center line of a 1.5" tube. I added holes to let it be connected with threaded rod. or pinned together to be made wider. a year later I bought my first non homebuilt cnc with a vf4. I made a new more accurate set of my angle slide blocks but made the other side have big chamfers. I realized how helpful it was around the shop with welding on fixtures and added circles for clamping. those got turned into D"s and the third version ended up looking like your current square. A friend was visiting and picked one up and said "Hey i didnt know fireball made aluminum ones?!" He pulled up your product on the internet and it was so cool to see how similar they are, my border was thicker since I use them as heat sinks and I had less holes in the middle. Ive continued to make custom ones for all sorts of jobs but when friends comment on mine I always send them to your website to get their own. Just so cool to see how people across the country can have the same ideas. Cheers!

Really great to see the humble beginnings of the first one and the essential nature of those first customers to help you move on and later offer them a better product

I have a few of these squares. When I was selling my home I had to weld up some 1” steel tubing doors that needed about 1/4” tolerance all the way around. I had already moved all my tables and had to ultimately weld these doors in the floor of my garage. Took my time, clamped everything tight to the square with the tabs as my indicated edge….first shot perfectly square (rectangle) doors. They were worth every dime right then and there.

I finally had a good reason to use the tabs on my minion the other day and it was glorious! Thanks for all the great tool ideas and KZfaq content Jason! I used my mega square two days ago while installing a stainless railing and it was a pleasure to use as always.

Unfortunately as a home gamer I can't justify the price of getting as many of these as I'd like even though they're super useful. Since I've started welding I can't think of a single project where I haven't used my 8" aluminum mega square at some stage.

Well done mate. Shame that postage from USA is so high, excludes a heap of us here in Australia buying the set.

I haven't been a customer for your fabrication products yet, but I just want to let you know that these squares (and your collab with Alec Steele) are what brought me to your channel as a loyal subscriber. Love the content. I hope you keep it going for a great deal longer!

Absolutely LOVE my squares. Thanks Jason!

They definitely keep getting better. Can't wait to see what is in store for the next generation

I love working with your tools. My first bed rack is functional but definitely not square. The one I build this weekend is twice the size, and 99% square, all built on the floor of my garage. These square helped me jiff things so they are level and square, so happy about this!

I would love to see a “v block” version for round tube, race car chassis work. I love your tools!

Add a V or radius groove to the faces for round stock to be used with your mantis pliers

Thank you for bringing the maximus clamps back! They need a video, one of the sleepers in your catalog.

I finally broke down and bought the mega, minion, and perfect squares. Wow, I wish I had these years ago. I also got the vise grips and really love them. Keep up the good work.

Frist saw these on Abom's channel and ordered a set right away. I love my mega squares; wish the tabs were around when I bought mine.

Loved watching this, it's easy to see tools such as the mega square and presume that it was perfect from the first batch when in reality it could be further from the truth

Cool to see all the improvements that have been made over the years.

love to see those squares with 3/4 system on them to use with your 3/4 table

Best way to develop your tools and your business is to listen to the consumer!!! WAY TO GO

Cool history. Thanks for thinking of us Floridians. 👍

Use these things a lot. They're amazing.

I have been watching your videos for quite a while and find them very interesting. I just watched another video (Steve Watkins at work) and the video was of him going through a building that was filled with all manor of machine tools it looked like the majority were brand new and the owner said they were way under retail and he loved to make deals. Hop this helps you out.

👍👍👍 great products...

Thanks for the heads up on dragon scale. Couldn't find an explanation on the site.

Love the content! Keep it up.

My father built something similar to this back in the 60s/70s. He made a few for his most common angles that he would weld as it save him time having to make a new jig every few months

I don’t do a whole lot of fabrication, but my machinist mind immediately wondered if a V channel could come in handy on the middle of the faces? Maybe one down the middle, and others crossing it width-wise to help join round tube together, and maybe even usefully add an additional 45 for square tube if for a reason they need to be joined oriented like a diamond to each other. Or it may just be redundant. Just thinking out loud, I don’t have one of these, so I may not be the best feedback source lol. I Love this channel and it’s good to see your product progressing and getting refined

Wow! I’m not a welder (I wanna be) and even I can see how brilliant you are. I love to watch your mind at work.

I love these, have got a fair few now, nothing else meets there quality and usability. Hardly ever use a magnetic clamp now.

You are a genius 👏, your ideas are fantastic!

I’d love to see these sold at A-L compressed gases! I’d also love to order a few of them. Love supporting local!!!!!

You need to put that dragon scale on your welding tables

Add a VEE (or radius) groove to the faces for round stock to work with the mantis pliers

Another awesme tool!

I really want one of the weld together yourself ones! Just for fun! Pleaseee

It’s a genius product. It’s great for the home gamer who doesn’t have a huge welding table available. Really like my square. Thanks Jason!

I use my mega square and minion squares almost everyday at a fab shop, from thing gauge steel to thick structural steel plates, makes keeping stuff square easy

Have you considered a coated/treated chromoly version that is smaller and suitable for both welding and machining as a fixture plate? Sort of thing where you can move parts of the assembly as a single setup between additive and subtractive processes? Base metal stays ferrous to be compatible with magnetic shims, have the holes, flats etc. Be certified to a given tolerance? Especially for parts that have complex internal geometry that are best made as 2 parts then TIG’d/brazed together, would be pretty sweet. (Thinking for parts where 3D metal printing/other additive processes don’t make sense, but you want single setup to avoid error accumulation.)

I believe a great idea is to make a magnetic coating .you can choose how "strong" it will be . it will help a lot in practical use but also it will protected from corosion . And you can give it a perfect finish for looks also and durability against scratches.

Where would one send feedback or suggestions on improvements for your tools? I emailed about adding a center V-groove to the magic square so it could be used to hold round tubing and was told that they weren't looking to modify the design at the time and I'd have to get any modifications done myself.

So cool to see the evolution! We love the latest iteration. Maybe if the hole could be a tiny bit bigger to pass clamps with larger pads? Otherwise, perfect. Oh, wait. No. Smaller variants. Not as small as the minions. 😀

I bet I've sent at least five guys your direction for those squares. Every single guy thought they were a little gimmicky.... until they used them. Then they wished they purchased at least four like I told them to buy in the first place.

Can you show how you would weld large 2x5” steel tubing without a welding table? I had a hell of a time figuring that out.

is dragon scale anti stick for industrial adhesives so that it could be applied to the fixture table when working with plastics or other hand assemblies that use glue

The problem is that it can be hard to order these products. I have two squares, but couldn’t get the coated versions. Then later, I tried to buy other squares, and couldn’t get them at all.

Kick ass square

What are the tolerances of the square. How SQUARE is your square?

As a home builder I'd be more than happy with the first version and could get away with accuracy not being perfect or like said just have it machined if needed.

an Aluminum version would be pretty cool

Idea: a place to keep the tabs and thumbscrews when not in use. Like, threaded holes somewhere on the inside of the square

I've got 2 of those and 2 of the biggest squares you make. The large set are dragon skin.

My suggestion for improvement: make a version or attachment with a V groove in the surfaces so you can use it on pipe and round bar.

is there an Australian distributor yet mate ? lots of guys ask for them on the forums but just too expensive to ship, maybe bulk might get the shipping price down a bit.

two thumbs up on the square but only one up for the price

Perhaps a pentagon or hex assembly as such.

Wasn’t one painted blue? I haven’t bought any yet but going to shortly.. was that an aluminum one?

Big fan

You have the square and a 45-45-90 triangle, is there any market for a 60-60-60, or a 30-60-90 triangle? Not saying I "need" them, but curious what the market suggests?

how about a tee slot runnig around the out side ? for vee blocks and other tooling? our a tee slot atachment that bolts on ? too the squares avalble in your line

Hey? What happened to the spatter demonstration? And they are quite expensive.

How soon until the 12 inch dragon scale are back in stock?

I have a custom millwork and cabinet shop, I would buy those in aluminum

I would buy a smaller one in a heartbeat...the ”mini square” 😂

Never realized you are in spokane, can I buy these locally?

Is this square in the video 8 or 12 inch? Looks like a good useful size for what I do.

Great tool, what about an aluminium version to also work as a heatsink ?

Maybe a trade in program so a guy can trade up to the newest version?

Version 6.0 comes with a certified welder to do your job for you…..😂

do you sell these in Australia?

Hi I was wondering if you can tell me the name of the company that made the casting for you thanks

How square are these? Can I use it as a precision measuring tool?

I was thinking today, why not drilling and taping some holes on all the faces of the square to place the tabs ? To be able to use it the same way we use a speed square. We could push it against the edge of a sheet metal do have square, 45 and to have a face flush to the edge Or even to screw some powerful neodymium magnets on one side. It can be useful too 🤷🏻‍♂️ I don’t know if you see what i mean My English is not that good 😂

Can i have plans to first version? Please to cut on laser

Next 20% off coupon code, I'm buying some!! Maybe even that cool chipping hammer/scraper!

I want these so bad just have to convince myself to buy them. Make fabrication so much nicer

Is this a official channel? I'm confused. There's fireball tool the fireball 2ool

I love mine so much I bought one for a friend of mine. He loves it and said he prays for me every time he uses it. Best investment I ever made!

I’ve been trying for months to buy his squares but the site won’t ship to Australia. So frustrating! Take my money! Anyone know a good competitor square I can get here?

Check out steel anodizing finish. Yes it is real. Tutorial on KZfaq. It was discovered by a NM university professor, but when he went to patent it, he.found someone else patented it over a hundred years ago. Similar to alum anodizing except a base not acid is used. You can also make colors on steel Similar to titanium.

is there a reason you don't make an aluminum version ?

Are they still cast in Spokane?

Dragon Scale: DLC?

Titanium nitride coating! Then it would look like a gold casting.

Do you know if anyone is importing them t Australia Love the idea but it'll cosy me couple of hundred in shipping

How about adding magnets

👍

3 dimensional corner square coming?

show whats it for?

Make it out of copper or bronze. Then no need for coating

Only costs twice as much as the tool to ship to Australia.

yall should hire me i would run circles around yall. your product is a good idea executed terribly i have a degree in math, welding, and engineering i would kick yalls ass

more 45 than square

Probably from ABOM Adam Booth

make tabs magnetic

I would pay extra for a "MAGA" square... 🙂