They kinda can work by putting a normal trigger under the analog

Hey I was thinking about buying the Doyoky too but I heard about some connections issue. Just wondering if you have had any issues with it.

You're right, nostalgia plays a huge factor here, though I prefer the NYXI Wizard and still think it could use a bit more weight to make it feel more like the original GC controller.

Spoiler Alert, They actually did 😂 They are releasing the Hall Effect version on August, and they already got the purple center piece if you order now!

I wasn't aware of that, I'll have to check out the new ones that I have. I still prefer the slimmer profile of the DOYOKY though 😬

@@128KB I think I would much prefer the slimmer design myself

According to who? The only two videos I've found mention that the buttons feel the same

@@JuanRodriguezNushio according to me.. I have a set from the first wave and it had issues so they sent me a second pair and both sides are improved. Check out his updated video

@@No1Noz the Wizard sticks are not flawless though. they have large deadzones making them useless for Smash bros or any game you really care about having good responsive movement in. If you're a casual player just dinking around in single player games, then sure, they should be okay for you.

You're welcome! Hope you like it

Hey I was thinking about buying the Doyoky too but I heard about some connections issue. Just wondering if you have had any issues with it.

@@trollersupreme4316 No issues yet.

It's worth supporting them both, honestly. Good ideas should be supported. Give both companies your feedback.

@@CarrotsNotCakefacts. Competition will only make both products better

@@Pumpkinhead2400 That's the idea, unfortunately I'm not seeing any improvements from Nyxi. One thing that a lot of people want that would be super easy for Nyxi to do is to send small stick caps with each pair. The bigger thing that they need to fix is the feel and function of the face buttons. They are on their second or third batch, but they have not fixed the face buttons. Doyoky, on the other hand, is responding to feedback. People want Hall effect sticks, so they released their Doyoky Retro GameCube JoyCons with hall effect sticks.

Thank you! The NYXI does have better sticks and supposedly has addressed the mushy face buttons but the profile and feel of the DOYOKY is great

Doyoky didn't take all of his suggestions. I find that mad odd. Nyxi's does have better handles, which is a rather major thing. In my comparison, Doyoky comes out far ahead. I have hopes for Nyxi revising theirs, though!

@@CarrotsNotCake I found that odd too, could possibly be a event of higher ups thinking they know better then those who understand the products. Though I think they took just enough to give the slight edge. Here hoping that these comparisons helps both companies grow.

@@jackbuerer I think the edge is rather vast rather than slight. The face buttons are so much better, as are the triggers. Having a small C stick right out the gate is a big deal. It's more authentically GameCube. For sure. I've been reaching out to Hyperkin, PowerA, PDP, Hori, Sunwaytek (high quality controllers) suggesting that they should get in on this GameCube nostalgia. If Switch does end up having GameCube Online, whichever company has the best GameCube JoyCons is going to make bank.

​@@128KBdo either of them have joystick buttons because I want to play Luigi's mansion 3 with them and I need to press the joystick for the move set

You said the same thing twice

The NYXI controller is excellent but spoiler... the DOYOKY will have hall effect sticks soon, they just told me :O

@@128KB Is it coming out anytime soon?

@@vladimirfranciscodiaz3688 This month... hopefully.

​@@128KBthey gonna fix that busted ass c stick nipple

Hey I was thinking about buying the Doyoky too but I heard about some connections issue. Just wondering if you have had any issues with it.

You and I might be the only ones that don't mind that, and even prefer it. People always complain about light controllers.

@@CarrotsNotCake going back to the nyxi wizard, i just realized how much I overlooked the weight in portable play doyoky really is the way to go

@@adamalarcon4973 Overall, for sure. I do prefer Nyxi's handles, though.

Been thinking about getting the dokyoky just didn’t know if it was reliable and responsive and only looked like a GameCube controller

@@flightkidd123 my advice for you is to wait for the updated Doyoky gamecube joycons. they're planning on making a version with hall effect joysticks so hold off on buying them for now.

Yep, we've got a sample on the way

I've read many comments regarding issues with the shoulder and trigger buttons on Nyxi's. I don't think Doyoky's hold up to legit competitive Smash, but they're definitely better quality. 150 hours in with Doyoky's without a single issue.

Wavebird cut in half lmao

Any update on which controller you like better ?

I'm with @ShiningSHORYUKEN Got an update?

​@@CarrotsNotCake ​ @ShiningSHORYUKEN Yes, turns out all the NYXI's have the crap large deadzone so they are simply useless for me for Smash. the Doyoky doesn't have the deadzone problem, so the thumbsticks are better in that regard (being more responsive). however, we know the doyoky will eventually develop drift, and not only that, but the replaceable thumb caps EASILY snap off when i'm playing a match really intensely. Like i will go to jam my C stick quickly to catch someone with a Tilt attack and the yellow nub will just go flying off the stick. So i literally had to super glue the caps i wanted to use on permanently. lol. the ABXY face buttons on both controllers i can perform about the same with. they're not as good as OEM GC face buttons of course, but they're better than other cheap 3rd party GC controllers I've used before. So for now, i do prefer the Doyoky. once the left thumbstick inevitably develops drift, i will swap the left joycon side out for a real joycon i've fixed the drift on and just use the doyoky's right Con for any Smash bros portable gaming i do.

@@Sickentist ​Lovely. heh. If Doyoky used modules as good as GameCubes, they'll last for a looooooooong time. Eventually could be decades away. Doyoky has their hall effect model out now. I'd link it, but my comments with links usually get deleted. It's showcased on the homepage of their website. Yo, easily on yours? Mine is on so tight. I put the small cap on the left side for kicks, and it took a lot of force to get it off. If yours pops off again, compare it with the grey one. I wonder if there's a manufacturing defect on the yellow one, or maybe on the joystick module's column. ABXY on Nyxi... I just can't. The height difference is too much. On Doyoky's, they're so close. Not like OEM GameCube, like you said, but good enough for sure. That gonna look goofy, but it will work.

Yes. The conventional button layout is not an improvement.

Yep. Remappable.

I just had to try this after reading your comment, because I do not feel like using Macros on any game at all, and to my surprise it does work pretty good as a button remap.

@@jetman4521 I see, thanks for telling me! :D

You can now, yes, we have a video about it!

Doyoky! Doyoky! Doyoky!

@@brentleycourtney while technically true, you can get a little crafty with the switch button remap software to program the back buttons however you want

Cool.

Once per... hour? Damn.

@@CarrotsNotCake Yeah, it makes it almost unusable

@@Jake-uf4cp Get in touch with Nyxi. They better replace that. I'm confident that they do not have any quality checking on these controllers. Out of probably a hundred and fifty comments that I've read from people that own these controllers, I've seen at least fifty complaining about issues. That's an incredibly high percentage.

@@CarrotsNotCake I contacted them, they said I needed proof, I sent whatever I could, then heard nothing from them

mine also started to malfunction. the stick. what's the point if it doesn't drift if it crashes before it does.

Any update???

Is it coming out soon?

I’ve asked the same thing, they haven’t updated me yet except that they will be releasing this at the end of this month or early next.

@@eseich perfect. Thanks

DAMN I ALREADY ORDERED THE OTHER ONE T_T

The Nitro Deck is barely any more ergonomic than the official Nintendo Joycons. I think you would be much better off and you would pay a lot less for the DOYOKY Wired RGB Joycon Controller for Switch.

@@SunDownSamurai I'm not interested in non hall effect sticks tbh. I like the no deadzones and the reassurance for no drift

I think that that controller is very... copycat. Basically, if you like the Switch Pro controller, you'll like that one.

No no. Nyxi is the one with the trash buttons. Doyoky's button height is nearly perfect to OEM GameCube, and now they have the Hall sticks.

@@CarrotsNotCake that's great to hear!

Yep, we'll be getting a sample very soon!

Video coming soon. Spoiler, nothing changes, I prefer the Doyoky personally.

That's correct, Doyoky is the main company and BinBok and even NYXI get their joycons made from them.

No idea what you're talking about 🙃

@@128KB What I'm saying is that at least the last two games in the Super Smash Bros. series. (for Wii U and Ultimate) have a GameCube controller, when it comes to the fact that ZL + ZR on Joy-cons does not feel the same as L and R on the GameCube controller.

PlayStation

There's no NFC support, sorry.

It is

It's purple now, and black on the upcoming black Hall effect model.

neither have HD rumble :(

Neither. Both old school.

Pretty much

I mean, yeah. Better stick modules, I imagine.

😂😂😂

There's no bias here just my opinion on what I prefer. Also, the DOYOKY DOES have hall effect sensors now, video will be soon.

I have twenty year old potentiometer sticks that work perfectly after over a thousand hours. Potentiometer sticks can be very high quality, or they can be the low quality junk that seems to be common in first party controllers these days. Hall sticks can be junk, too, as has been seen with the sticks in Nyxi's having issues at an alarming rate.

@@128KB I think the only thing that changed is the sticks. I'm hoping that they use Hall triggers in a future revision. They are a very good imitation of GameCube's analog.

Hahaha I know right

Add weights! Take off the back shell, hot glue 'em where you want 'em, and there you go.

@@CarrotsNotCake that’s a lot of extra steps when I could just have a controller that fills the hand without needing me to physically mod it

@@Numatruehome It's really not, but alright.

@@CarrotsNotCake I mean why would I do that when one of them has all of that, and the superior longer lasting joysticks

Should be this month. Maybe next. Sooner than later, hopefully.

I imagine you've seen, but they are out!

@@CarrotsNotCake yes! I'm just waiting until they release the case for the controller, they said it is coming out near the end of the month, so it should be close by. Thanks!

Oh you've tested both?

Awesome, I've just got the new colourways of the Wizard, I'll have to compare them with my original one!

@@128KB that’s cool. I’m looking forward to a video. I think they deserve a new review by somebody (hopefully you) that points out the improvements they made, because they really did listen to the community. I had some issues with my order from the first wave so I was sent a replacement. I was blown away by how much better the face buttons feel. The dpad also has a proper pivot now, so all directions can’t be pressed at once. Thanks for the response. Love your videos.

Yeah I get you, they'd be epic with hall effect but there's nothing to say they will drift in a year. Some controllers with potentiometers last decades

If their joysticks are as quality as GameCube's, they'll last for at least as long as GameCube's have. 22 years in, I have perfect GameCube controllers. No input issues, no drift. Quality potentiometers last for a looooong time.

@@128KB Exactly! I dig Hall effect, but this outright anti-potentiometer sentiment is unfounded.

Doyoky will be releasing Hall effect versions. They're doing quality control on their first batch of them right now, ensuring that they get to customers in working order. Unlike some companies.

They're releasing a hall effect version soon.

That’s right

Lol whut, look at the channel and you'll find my reviews of each product. I've tested these products showing both pros and cons. These aren't sponsored or paid either.

@@128KB "whut" You trying to make a dime like everyone else I get. I could care less sponsored or not. The agenda is the same on these pathetic alternatives and misleading the audience like Nancy Pelosi. People catch on. Stop pretending. You are not the only one.