Hi talking about mowers we have a woods D/80 pull mower tag along got it from cousin 300 miles away put it in a utility trailer back home greased it up and checked gear box and aired the tires and hitched it up to are international utilty 460 gas with loader .the mower was used in fruit orchard work we use just it to keep our 7 acres grass 2to3 foot high cuts great .Cjd wash state .p.s. all it took was gas money and a visit.We love it 🤔 love all your video s

I came for the brush hog. I stayed for the H. ;)

The H an that bush hog are doin a great job 💪👍

No matter how many videos I watch, I never get tired of seeing the Herculean H.

I watched for the brush hog. Maybe there should be a chain guard on the front because of the opening

I love the color. Give that A a shot the little red that could

No Doubt - the Farmall H.

Give the A atry it's the least you can do I know a guy who pulled a 5ft trailer bush hog with his

At $7.00 dollars a bushel got to be worth something

this is your second purchase of green, is there something you're not telling us ? hahahahaha

that bush hog was made 3 pt and the tongue was added it is definately not factory. i remember one a dealer i worked for that the mower body came bare and they were eithr shipped as a 3pt with or withour a single crazy wheel or like this one

I’m prejudiced...toss it on the A and see what happens

buy a overrunning adapter for your pto shaft more than once even when I knew about it and planned for it surprises happen.

I'm gonna disk with the 560 today!

Hello so I subscribed to your channel. When I was 8 years old a truck pulled into the yard. On it was a new John Deere 710. That impression not going to go away. In short time I put 3500 hours on it. I have a old international here diesel I'm going to restore not sure of the year. Well enjoyed your video. Thanks have a great day.

I love the green brush hog with the Farmall H. BOOM!!!

I think that hog needs a can of red spray paint

Why plant corn if your not going to harvest it ? Was the price to low ?

It's eating! Great job it did..now a little red paint💥😁

I bought me a pull type bush hog a couple months ago. Just got around to bringing it home this evening. Tried it out on my H. Works like a charm.

Look at that clover

Would adding front wates to the tractor help at all? Also, how come all the brush hogs i see are narrower than the rears on the tractor?

Looks like the hog cuts real good

I pull a 6 footer with my H , I suggest that you load the front tires. It helps me to keep the front down.

I had a super a with a three-point and it pulled a 4 ft bush hog with no problems I used to mow my whole lawn the bush all you got is a lot heavier than the one that I had might want to try it with the h

...was that brush hog "Ho-made"...?? H needs larger rear wheels....

The M sounded good as ever, and done a good job. Thats one HEAVY HOG.

I just changed my oil and adjusted my clutch today and got to go plow and disk and add on to my family’s garden

Actually it's great to see what what certain Farmalls will do.... Great video

The A will handle it. You have positive steering weight. It's not floating.

Looks like a lilliston roto speed

Can you move the axle forward to better offset the weight and McGuyver the crank handle position so it would work? Anyways another great video buddy. BOOM!

If you think that is heavy you should try putting a new holland 1411 discbine on a farmall C to move it around. I had to add air to the tires just so the rims didn't hit the ground.

I noticed that sometimes you press your thumb against the steering wheel! Never do that! Keep your thumbs around (under) or over the wheel. Thumbs against the wheel can be badly injured if the tractor hits a hole or whatever and causes the steering wheel to jerk. I learned that in the early 1950s.

I think the H made a new friend. 5 footer does great behind mine.

Glad that you can enjoy your red tractors and thanks for sharing it but sad news is here no more new red tractors since my latest great Magnum tractor i have been told cant be fixed .. so currently looking at other brands Versatile and Fendt for the big heavy lugging tillage jobs here... funny thing is the 40 year old 1086 had to pick up the slack where the new 2019 magnum dropped

We had a neighbor who used a mower about like yours to cut hay. He was crude but made money!

Need to get guard around the drive shaft

Well sir, front of the tractor looks like its stuck to the ground. Yeah, definitely consider the hydraulic cylinder. Good to go!!

You might try cutting backwards. Don mealy just cut his corn and he cut it backwards. It might keep the cobs off the engine

My h will swing a 5 footer no problem. That is the perfect brush hog tractor!👍

I am not sure, is it heavy?

👍Consider floater wheels or roller on the front

A friend of mine has a 666 gas tractor for sale not able to farm anymore

The A can do it, but the H would be better.

make sure you get a slip clutch and put on the tractor your going to use with it would pay to put chain curtain on the front of you brush hog good video man

Looks like a great match 4 the H👍

We used to pull a 4 foot tow behind with our 200. I’m sure it probably would’ve run a 5 foot decently but that’s what we had. Used the fast hitch to raise and lower it. As many rocks as there are on the pastures we used to mow, I’m leery of pulling a tow behind with a straight drawbar and no way to lift the mower up.

Man i wish you were in Louisiana, theres a man with a lightweight pulltype shredder like that that the a would match hand in hand with.

I like it, Mine is a bushog brand that is designed almost like that,I havent tried it yet, but it appears to be almost new,Got it at an estate auction.Hope it works as well as that one!

8 bolt i believe to put the tires on the outside and flip the axle so the weight is more centered . I have a woods mower that is about identical .

Didn't Farmall have front weights for the M and the H? If you go with a hyd cylinder, go with a single action. Your throttle handle loose? Yes, stopping to watch the "H" do some work. :P Cheers :)

Dude you are soo close to 20k, fun stuff brother. 💪❤

With the weight of that hog I am sure the steering is lighter. It cuts really well. Over here, rear discharge cutters tend to have a row of short chains at the rear to stop the stones flying. Once you have hit it with the red paint it will be perfect

Nice work. That’s does a nice job as well. Red power

Smart about using the loader to cut corn

Seeing that bush hog sitting on the ground it didn't look that big till I seen it sitting on the trailer. The H look like it was squatting down a little. Looks like it does a nice job cutting.👍

Hi big fan of your channel I recently bought an h and can’t get it to run it has a m carburetor on it and I need to find an h carb any suggestions where to get it I can’t find one

Well, since it was too big for the A, I guess you can keep shopping for lots of new attachments! Love a good auction ;)

ur 400 would just play with that brush hog :)

Super A through 140 do well with 4 foot bush hog....5 feet might be a bit much. Assuming the A has the same PTO output as the super A through 140, it may not handle 5 feet, especially in heavy brush. We have videos on our channel with a four footer behind our 140.

Hello I think you gotit😆

A 140 / a / supper a / all the same that is what it is set for

Dude-- that brush hog would cut better painted red 😜😜😜. That ugly green has got to go. Break out the paint.

Maybe your C can pull it, but definitely the H.

That hog worked pretty good! Instead of let’s go let’s grow you should have said let’s go let’s mow!

Hello It's a Heavy Huffy. Enjoy your post

I thought you bought that Brush Hog, but wasn’t sure! Our Super H pulled an 6 foot with no problem! In fact it looked just like yours except it was an M & W! That’s solid iron you got there! Bit much for the A or even a C or Super C... H will be fine but I would invest in an overrunning clutch and some drop chains in the front, flip it on her side and take your grinder and sharpen it up! You’re good to go! To get rid of coons during sweet corn time we use to auger in several holes about a foot deep and put tuna fish in the bottom with a 110 coninear trap on top and boom! Usually right before it’s ready to pick!

Boom choppa

Just be sure it has an over runing clutch

The h will pull it with no problem I pulled an 8 ft with a cc case a 1937

That a will work fine for that used mine all the time before I got my H

Put the 556 on it do the job

I said get that 5520 fwa it's better for that

U think

Better performing than a cheap unit but they do take power and older Farmalls didn't have the fastest PTO.s. In the end it might take your M.

I like the color Red, I hope you have some 2150 laying around👍

Can you demonstrate the bush hog pushing you forward? I've always heard about it but I still can't understand how it works once you hit the clutch.

If I don’t know any better I’d say the H enjoyed that. That tractor has nice throttle response by the way. You gotta hog that corn field for us now, there’s no getting around it 👍🏼

Paint on your hand?

Wonder what the tongue weight is

I think it will work fine

120 lbs...please

I think he's too chicken to try the A. on the bushhog. Our bushhog had the wheels on the side, but it would cut two rows of cotton stalks in second gear. I think the A will need a PTO adopter.

Have to change ur channel name to fake deere equipment lol

I used to pull a 5ft with a super C

Hey wrong color lol

My dad had a 5' mower and he pulled it with a W-4. It would be a good load for the A. We currently have a 7' Woods and a 300 or M would be a minimum. What resolution do you set your cameras at?

This could be a long reply. First off, you don't seem to be a guy I need to tell this to, but I'm going to anyway. About a year or so ago a young guy was bush hogging and some how fell off and got killed so safety first. I don't know all the details, it was about 10 or 15 miles away. That mower is a beast. What a bush hog. Looks like you better stock up on 2150. That H has a new toy to pull. Done a great job and now you'll keep more organic material in your soil. Should really help your plowing. Thst's a good place for your SMV sign, it's just not far enough back. I've got mine mounted on a bracket out of the way of the pto. I'll see if I've got a picture I can send you.

Never realize how bad Farmall suck till now

Wear did you get the money too farm with

The H has live pto Boom