Thanks for taking the time to do a test like this. Really cool to see the comparison. I’ve been using shoe goo and e6000. Didn’t really know what was better. I have done one lexan body with the drywall tape and e6000. So far I’m happy. But it’s great to know the shoe goo will be just as good for that method. Thanks again. Great video!

BTW, the solvent for E6000 is dry cleaning fluid aka perchloroethylen/tetrachloroethylene. By adding this to E6000 you can make an excellent low viscosity version of the glue. I used it to seal joints in sea fishing traces, and it is untouched by saltwater immersion.

E6000, Shoe Goo and Amazing Goop are all variations of the same glue made by the same company. They also make E6100 which just thicker less runny version of 6000. (6100 is hard to find.) Shoe Goo has been around since the early 70's.

Thanks! This is one of the BEST 'test' videos I've seen on YT for glues. Taking the time to change weights, and hours of drying is something not done by others. I can now see which glue I may choose to repair the pads that have some off the bottom of running shoes. The factory didn't do a good job because in one run, they all fell off one shoe! (Asics GT-2000) Managed to retrace the run and find every one of them! Your tests helped me decide which adhesive to use. Thank you for taking the time to set up these tests. NICE RC vehicles too!

the way you spent days making this video! I am subscribing just for the level of effort! Thank you, sir!

I’ve been using Goop for years for a variety of repairs. I’ve never really compared it to similar products. Thanks for the video.

I prefer the Shoo Goo myself, but have used the E6000 as well and find that it is a little easier to work with (the SG seems to thicken up quicker so you have to work faster), I also really like the various JB welds, the plastic and clear welds in particular for this hobby.

Thanks for investing the time to do this and share the results - much appreciated!

Great test. One criticism with the test... the eye hook set up pulls it downward... but also puts a twist... slight difference of the orientation of the eye hooks may give more twist over the others.

Well you had me glued to the screen Joe.. Lol.. good bit of info though. Enjoy your Easter mate... Cheers

Was surprised at the shoe glue thanks I wasn't sure about glues and really appreciate your help man

I used some E6000 from a tube that was nearly dried out to the point of being like dough and it still held aluminum Gemini letters to red brick that was not cleaned on a windy cold day in the Texas panhandle. I highly recommend the brand.

I have used Shoe Goo and E6000 quite a bit over the years... amazing to see how they do after 24 hours... I have been using 2 things lately as theyre really handy at the track, E6000 is available im 4-packs of small tubes, which is convenient, as well as FlexTape, by the flex seal brand(do not cut it with scissors, use a razor blade, hobby knife, etc...) Thanks for this comparison, I'll keep on with Shoe Goo and E6000...

I may be wrong here, but I think Shoo-Goo was the original stuff, being available in the late 80's, early 90's. I was told that that was what they use to bond the soles to running shoes. I've used it at work to mount steel on steel fixtures (they will never come apart even when you want to) and have even repaired several snowmobile tracks where I have torn out a stud and it worked remarkably well for that.

One of the best comparison reviews iv seen. Great video. Thanks

Great test: thanks for taking the time to do such a detailed practical analysis

I really enjoyed that, thanks for putting in the effort for us to see how each glue performs over time.

Great idea and excellent execution!! That was awesome, thanks for the vid! I'll be using Shoo Goo going forward!

Please do one more test between shoogoo and e6000. Weight at least 5 days before doing the 70ounce test. This is amazing!

Thanks so much for your time and this amazing info video. Saved in my crafting folder. 🥳

Your test was the best thank you and keep it up I’ll be watching🔥

I don't know why this is so exciting and entertaining but my heart is beating fast every time he puts the hook on a different stick period and then when he's like damn. I can't wait to see more videos like this

I found myself cheering for E6000, and ready to cringe when you hooked the gorilla glue... entertaining and simple science. Thanks again

I love E6000. But this was fun to watch. Thanks for taking the time.

Shoo Goo and JB Weld......the originals and still the best

Just want to say huge thank you to you! I have been wokring on a DIY project for a week using gorilla glue and it always falling apart. I will most definitely swtich to E6000!

Really amazing test here man! thank you so much for making this vid :)

Shoe goo has a Harder consistency when fully cured. Yes, still kind of rubbery but harder. E6000 is the way to go if you want something more flexible. E6000 can stretch 600 to 700 percent of its original shape and return back to the original. Take your pick. Both are probably overkill in performance when used in most common instances.

I felt in love with ur work bud. U got a new sub. ✌🏼

I was not expecting that outcome Awsome video

This was a very informative video and I like your experiment setup for it as it seemed as fair as possible.

Great comparison video, extremely helpful. Made up my mind to buy the shoe goo. Thank you for sharing.

I came to find which Glue to buy, I eventually settled into being entertained. I could watch this type of content all day

Both Shoe Goo and E6000 take up to 72 hours to fully cure, not sure about the others but would have been nice to see how strong they are after the full curing time.

This was excellent information. It took me an hour before finding this information to begin my new project. Thank you so much!

I use all the Eclectic! s glues and was surprised at the result! Thanks for posting a very helpful video!

This was definitely a good video to watch and very informative 👍

That was amazing!! I really thought Gorilla Glue would do better. That you so much for doing this and for sharing.

I have used the E6000 on my Trx4 and had no issues...used some Gorilla glue to flue some wood together held well but foamed up too much.

Thank you for taking your time to do this test

you keep putting the weights closer to the white bar above the eye of the screw on the first one which will help it to be stronger because the closer in the weight is the shorter the lever. The further out the weight is placed the more downward force is created on the glue. I know its only a small distance but if you're trying to do a test all conditions have to be the same for accuracy.

Thank you. This was just what I needed. 👍👍

thanks for posting this, just what i needed

Thank you for a great test!

Learned alot about these glues and thank you for the tests, I was laughing at the "down!" so funny.. My nerves got a little rattled every time one fell but actually a great comparison IMO. BTW you could do great voice over for the boxing ring announcers! This was entertaining and educational!

Great Video.And Shoe Goo is AWESOME for fixing leaks in inflatables as well.Its saved my inflatable hot tub many times and counting.

Awesome video! Thank you for doing this video. What a great education!!

I’m watching this video because I’ve used GOOP forever and my tubes getting low, so I just was trying to check if it still existed. I found the tube that I have and didn’t know if it still existed. Awesome 2 see its here !!!

Great test. Thank you. I guess the surface it is gluing onto is another consideration.

I have a pair of Muck Boots that caught on a hook and tore a hole in in the rubber side by the right ankle. They were 2 years old at the time. I purchased a 2 oz tube of E6000 rubber adhesive and repaired the wound inside an out. Thin layers inside, thick patch on the outside hole. That was 3 years ago. No leaks, and the outside patch is even hard to see now. Great Glue E6000. I still have the remainder of the E6000, and it is still pliable and good. Use some last week. Good stuff !!!

brother that was great!!!! i've always used shoo goo, and now i won't use anything else!! stuff is also great for water proofing, i run spektrum gear and always take the cover off of the RX and cover the board with goo and have never had one fail in the water, also great for rc4wd winch controllers, balance plugs on ur batteries so u don't break off them tiny wires blah,blah,blah:) oh ya, also great for repairing lexan, mesh drywall tape and goo makes for a great and really strong repair!

Dude!! Thank you for doing this. I have been using gorilla glue on my skate shoes and I am definitely switching because of you and this video

E6000 recommends a 72 hours full cure time.

Its 2021 and really glad this is on my feed. I was just researching for glues. Would like to express my appreciation for all the hard work and time you must have put in present this comparison. Thank you.

GREAT VIDEO I don’t usually comment on videos but I made sure to leave a like and subscribe! You are the best !

I like both SG is my personal favorite because it starts to harden quickly so makes it easier to keep in place

Love it. Project farm meets Rc!!!!

Shoe Goo and E6000 are made by the same company, look at the MSDS, using E6000 for years, great product

I was going to glue some tires and I am going to use shoe goo and then I see you have a new video up saying which glue is best. Well I do know that now I really will be happy using the shoe goo. Thanks for doing this test. Stay safe

I LOVED this! Thank you for your time in experimenting.. Ive always been True to "Goop" I thought "Shoo" was the same? Bottom line, Gorilla has always failed me. Total waste of $- Im curing Goop for a '79 eldorado as I post this.

This is probably the most informative vid i have ever seen :))

Thanks for answering the question of what is better for us.

Shoe Goo, E6000 and Seal All (not in this video) - all made by the same company. All fairly good products. Thanks for the video.

I used plumber Goop to fix the belt loops and holes in my jeans. Made patches from an old pair and put them on from the inside. Been through the wash without a problem.

I'm glad I just bought Shoe Goo for my boot sole that separated!!!

Here in 2022. I question the method of reusing the same location on the horizontal bar, re-gluing in those same spots when there is already glue residue from the previous tests. But overall, it's still a good test. I have ShooGoo, & Gorilla Glue (white translucent version). A few years ago, I bought Gorilla because of the television commercials. So when I used it to rebond a metal stick inside its hole on a wooden handle (for a handheld kitchen sieve/strainer), I thought it would hold, but eventually it broke out again a year later. I noticed the cured Gorilla residue inside the hole & around the stick was spongey. Anyway, some time later, I repaired the strainer again, but this time with JB Weld. And this is JB Weld that was probably 30 years ago. Both JB paste tubes still had good glue in them, they did not seem to set/cure inside their tubes over the decades. I used that for the strainer & since then, a year ago, that strainer is still good & strong. To be fair, I did drill the hole about an inch deeper. It might have shortened the strainer length a bit, but I think putting it an inch deeper helped add more JB glue inside. In summary, I think Gorilla works, but to only a smaller degree & that commercials & hype is why it seems to be selling, despite it's relative inferiority against other adhesives, as both witnessed in the video & in my experience given. I have used Gorilla on other repairs, but in those repairs, the pieces are not on moving parts, so the Gorilla holds ok. I have used ShooGoo to re-glue bottoms of soles on some sneakers & that seems to be holding up & that was done years ago, probably 2016, 2017 or so.

Your video was good, but the 24 hour duration of the test wasn't long enough. Both ShooGoo and E6000 continue to cure for 72 hours. I'd like to know if ShooGloo would still come out on top after they're both fully cured at 72 hours?

Great video! Thanks!

Cool test! Happy Easter! 🐇🐣🐰

Yup, you managed to make science fun! I just wish that you'd do some sort of test with actual shoes (since I'm looking for the best glue to repair shoes, sandals and such).

Thanks for your time!

In the 1980's one of my "Kung Fu" student accidently ripped the inside of my nylon shoe. I put Shoe Goo on it ( just bobbed it on ). And in 24 hours sitting in a basement, it was hard as a rock and didn't break loose at all ! 👍

Excellent job...great info!

I've use Shoe Goo & Amazing Goop to do bicycle (air chamber) tire repair countless time, with just preparing the surface to be more grippy they both hold on to my air chamber which mean i do not need heavy patches that leave buldges. Because it strech i do not feel i fixed it. Just don't try to do it on an air chamber that is significantly smaller than the tire you are putting it in. Less strech = the better.

very good video, the only one in YT that compares in fair scenarios this 4 glues

Well done very informative thanks for your patience and Performing this video I'm going to buy the E6000 my neighbours got some shoes and boots that seems to be giving up on the Soles and the seams she's not a very rich person so this is definitely going to help thanks again. Stay healthy cheers

Great test..just remember that Any glues weakness point is to how well you clean and prep the surfaces....any grit sand or oil residue will weaken your bond using the best glue to nothing.

Thank you, this was helpful

With solvent based glues it's very important to let the solvent evaporate slightly as per the instructions before pressing it together. Otherwise it never dries in the middle as it never has a chance to evaporate and activate the glue.

It just so happened that I was trying to decide whether to buy Gorilla Glue, E6000 or Goop when I found your video. Good job! I do have one comment. I noticed that at 38 ounces for 12 hours you hung the weight around the base of the screw eye instead of the middle of the eye on the Amazing Goop. This would have decreased the leverage of the weight. I don’t think it affected the overall results enough to worry about. I appreciate you doing this testing and based on your results and my needs I think I will buy E6000.

Thanks for the video this was helpful

Dude, I got to thank you for all these videos! It has really helped me keep cool during this crisis. I have fixed my TRX4 and have been driving every other day. I submarined it yesterday. Got to relube everything today. My servo started acting up, but both batteries were drained so I see later today if it is something more. Love the glue topic I have some gorilla glue at the moment. I started typing this before the video ended so. Really thanks.

Thanx Very much, i was looking for a glue for my shoes

Thank you. Great to know.

this seems like a weird thing to be watching for entertainment, but I love it. Wish Shoe Goo was cheaper here in the UK

That is just what i use E6000 it's the best again thanks for the tips

Def will be using my Shoe Goo for more applications! Was shocked Gorilla Glue performed so poorly! Great test.

Very helpful. Thanks.

Im going with E6000. Thanks subscribed.

really amazing experiment of glue.. thanks

Was just in Walmart looking for shoo goo and saw the e6000. Did a Google search and found this video. Shoo goo for me!!!! Bash proofing a new body.

I have the gorilla clear grip glue and E6000 , and I absolutely love them for certain things but I did learn the limitations of the Gorilla Glue. I especially like the E6000 because I found it to be the best glue I have ever used on so many things. Just recently I found out it work perfect to glue the bottoms of shoes and cleats back to the boot part of the shoe. Excellent permanent Bond and since when it cures it is kind of elastic and flexible, it feels very natural under the foot having bonded the bottoms back together. And I have used E6000 for so many other things. Definitely worth the money:-)

Brilliant demo.:-). Thanks a lot..

Awesome comparison.

Use Shoe Goo for auto weatherstripping and other non-stressed auto restoration projects. Not messy, which is a big plus.

Thanks for this video, e6000 surprised me

I thank you from the bottem of my heart , sweet man . Yacov from Israel

i just used amazing goop to glue my firestorms to my tributes. Its been holding up awesome. 2850kv on 4s and no problems.

I already using the shoogoo. that's good item.!

Excellent experiment.