You are an awesome person, great and wonderful work
@fatimasheraz82358 ай бұрын
thanks for a great lecture
@RenoBlade25 жыл бұрын
You can also compare the cost for one Site with a high numbers of Antennas and the cost for a Site with less Antennas. On one place an Massive MiMo can be more cost efficent than an small Cell aproch. In an other place it van be different.
@WirelessFuture5 жыл бұрын
Eduard Walz Yea, that is essentially what we are doing by letting both the number of antennas and the base stations per area unit be optimization variables.
@nafisoscar91483 жыл бұрын
Thank you sir for a nice explaination. Do you have other video about spectrum efficiency of NOMA?
@WirelessFuture3 жыл бұрын
No, NOMA is essentially an outdated technology that we don't believe in. Episode 11 of our podcast is discussing that: ma-mimo.ellintech.se/2021/03/10/episode-11-non-orthogonal-multiple-access/ You can also read the following blog post: ma-mimo.ellintech.se/2021/04/15/is-there-a-future-for-noma/
@nafisoscar91483 жыл бұрын
@@WirelessFuture Ok I will read that, thank you
@kiyameribo25043 жыл бұрын
thank professor for your brief explanation in optimization transmit power. i would like to ask which constant variable optimized in cell free massive MIMO other than mentioned in this video?
@WirelessFuture3 жыл бұрын
I haven't seen any other "new" variables being optimized in the cell-free Massive MIMO area. Apart from what is said in this video, one can optimize which subsets of access points that are serving which users. This is not a truly new variable but is still important. Here is a paper about it: arxiv.org/pdf/2002.01504
@nitsr60532 жыл бұрын
This video is a Gem of a kind. Thank you professor
@magedrefat16584 жыл бұрын
A very nice video. Thank you very much.
@penghou89713 жыл бұрын
Thank you for sharing. However, I have no idea why we need to optimize the number of users and antennas in a cell. Is it a real-world problem?
@WirelessFuture3 жыл бұрын
Yes, this is a real-world problem when dimensioning cellular network deployments. In this case, we are finding the desirable base station equipment (antennas per site) and figure out how many users should be served simultaneously to achieve maximum energy efficiency.
@jiniashika30672 жыл бұрын
thank you sir. nice explanation. what are the factors are considered for optimization of power consumption model for energy harvesting. send your video link sir
@WirelessFuture2 жыл бұрын
We don’t have a video on that topic. The important thing is to build a model that depends on the variables that you will consider and then validate it theoretically or experimentally.
@abidafridi6570 Жыл бұрын
Hello Professor, Kindly give some idea about transmit power minimization using Multi-antenna on UAV ? What factors to consider why deploying beamforming in UAV enabled commmunication
@WirelessFuture Жыл бұрын
When formulating an optimization problem, you need to figure out what function to optimize, what variables to consider, and what the constraints are. I understand that you want to minimize the function “total transmit power” and that your variables are “the individual transmit power values”. The remaining question is what your constraints are, because you need something related to the communication performance, otherwise the optimal solution will be to use zero power. Since you mention UAV-enabled communication, you need to determine what difference the UAVs make in the system compared to a conventional network without UAVs. Is it only the channel model that differs or something else?
@abidafridi6570 Жыл бұрын
@@WirelessFuture can you please share the link of Book's code for simulation Thank you. your book is student friendly and easy to read and understand.
@WirelessFuture Жыл бұрын
@@abidafridi6570 I guess you refer to github.com/emilbjornson/book-resource-allocation All my other code is available under the same profile.
@abidafridi6570 Жыл бұрын
@@WirelessFuture Thank you so much Professor
@WirelessFuture Жыл бұрын
@UCb9xzjXWJYW-MOU4Q6TZbVg Right, but many beamforming algorithms can be applied to any set of channel vectors. For example the algorithms described in my book “optimal resource allocation…” are applicable for arbitrary vectors, but the communication performance (rate) will depend on what the channel conditions to use. There are also concepts such as beam tracking and angle-of-arrival based channel estimation in the mmWave literature that only works if the channels have the right properties.
@jiniashika30672 жыл бұрын
sir,my research area is energy harvesing by RIS .now i found two problem are maximise harvested power and SNR at recevier.optimize the harvested power means which factor is i considered for getting high value. transmission power or rectifier output
@WirelessFuture2 жыл бұрын
There are many possible ways to formulate optimization problems, and multiple possible metrics. The point that we want to make with this video is that we always need to make a conscious choice of what problem we want to solve and have a (subjective) motivation for it. If you choose between maximizing two different metrics, think about what would be the benefit of the two different problems and then make up your mind about which option you prefer!
@krishnaharsha20332 жыл бұрын
What do we mean by maximizing the channel gain in order to minimize the transmitter power PT?
@WirelessFuture2 жыл бұрын
At what minute was that said? I would guess it means the following: If we need a certain SNR at the receiver, then it is proportional to "channel gain * transmit power". If we can improve the channel gain, then we cut back on transmit power.
@krishnaharsha20332 жыл бұрын
My sincere apologies Thanks a lot for answering a question about the topic which was not discussed in this video. This will not be happening again.
@hullopes4 жыл бұрын
Very nice video. Thank you. Do you have any point of view about the resource allocation problem in mmWave mMIMO small base stations (5G)? I get your book about this theme, and I'll read that.
@WirelessFuture4 жыл бұрын
There are many types of resource allocation problems to consider, including scheduling, multiuser beamforming selection, power allocation. You can find some possible solutions in the academic literature. These things are not standardized so we cannot know what kind of solutions the companies are using. My books can give you a sense of some of the theory for how to approach these problems. I’m sure there tutorial papers on specific topics as well.
@ms.t.swapna55554 жыл бұрын
@@WirelessFuture can you send the book for resouce allocation and power allocation. I am doing research in this area