I just made the switch from OpenRGB and this looks incredibly promising. I'm especially impressed with its compatibility right out of the box. This video was a great introduction too.
@TotallyNotYellow Жыл бұрын
This is so good. Everything is explained so well. I can finally understand a toturial.
@fonty0124 ай бұрын
stop lying
@shootemupgaming5418 Жыл бұрын
I'm testing SingleRGB I did a lot of custom profiles I will have a video up today showing my setup. It does look really nice.
@OptimusBananas9 ай бұрын
But what if the controller does not show up
@mxgamer124 Жыл бұрын
What if it is an unsuported device?
@kevoneone6 ай бұрын
Well it's not magic
@ooplycrossing2744Ай бұрын
CUTIESS PFP!!
@DoomGuy148.2 ай бұрын
Thanks for great RGB software!! It can take some time to get used to controls but otherwise it's awesome.
@swagboy135 Жыл бұрын
How do i make my fans stop blinking?
@coleenjane17 Жыл бұрын
This is so cool. I was never into RGB but when I saw this.. it made me want to buy RGB now, since you can just manually edit those lights that comes out, it will be aesthetically pleasing to the eyes.. not just random RGB lights but selecting the colors is soo amazing!
@seaneckhart9914 Жыл бұрын
I plug my 3 daisy chained CM halo 120 fans to a motherboard header and they are still treated as one fan. The fans do not require any special adapter btw
@Pqqrk Жыл бұрын
Honestly this tutorial is wonderful but I have trouble with my components lightings as some of them are RGB and ARGB Fans so it's a bit confusing
@wildcardsck9545 Жыл бұрын
can you tell me how to hook up a led strips out of your pc
@PotatoProd.899 ай бұрын
yes answer this
@Mutzhaus5 ай бұрын
This has made my PC a complete mess. I guess I'm going to reinstall. I really wanted this to work. Everyone says how great it is but I just don't see it yet.
@SignalRGB5 ай бұрын
Can you elaborate the issue you’re having?
@TheCJsamson Жыл бұрын
Can I use SignalRGB if I have a Z690 motherboard? As Z690’s aren’t listed in your devices, can I still use SignalRGB for my fans and RAM etc. with a 12th gen MoBo? 🤔🤷
@JerremyvdH Жыл бұрын
I also have a Z690 and for me it does show up in Signal RGB, but only if I have updated MSI Center to the latest version.
@viralinfection7861 Жыл бұрын
I’ve got a Z690 board as well Corsair Vengeance RGB RS, neither are in the supported devices but they both work.
@harrite11 Жыл бұрын
Ive synced my gpu, cpu cooler and ram but my case fans aren't being recognized by the software and not flashing red. The 3 pin from the controller is plugged into the rgb header. Is there a fix for this?
@SignalRGB Жыл бұрын
Contact the Discord server discord.gg/signalrgb
@shootemupgaming5418 Жыл бұрын
1 thing that is needed real fast is the option where it says remove I clicked it so many times by mistake and it deleted all my profile settings. Do you work with them or what because we need the option where if we click remove it will give the option and say yes or no.
@SignalRGB Жыл бұрын
Consider this: you have 20 effects you want to remove, now you have to deal with a yes or no dialog each time.
@shootemupgaming5418 Жыл бұрын
@@SignalRGB It's better then deleting the effects you already made I have 60 effects profiles and some of them have 3 custom profiles saved each that's a lot to have to make again I deleted maybe 7 or 8 that I no of. It just saves time it takes a long time to get the effect perfect and deleting a hour or longer of work does suck. I'm just saying it's more safer so we no nothing can be deleted by mistake.
@shootemupgaming5418 Жыл бұрын
@@SignalRGB I just did a video on my setup I'm not done yet some more stuff I need for the PC. The phone keep zooming in out tying to focus.
@Pancake-k1c Жыл бұрын
How to set up the lc100 triangles?
@SignalRGB Жыл бұрын
select how many lc100s are connected in components on your controller then configure it in layouts tab
@nikitaromanenko9167 Жыл бұрын
I have an Omen 30L and it only recognizes the RAM and no other components in my case. Would pay for the pro at this point if I could get this to work. Since its not recognizing the components I cant manually configure them either smh.
@imadibnelghazy Жыл бұрын
very very useful 💜 I don't know why signal RGB don't have 100M subscriber
@Omizuke6 ай бұрын
Did you daisy chain those LianLi after the one connected to the board? Cause I have 2 LianLi. From board to a fan, and second fan connected to that first fan. Signal doesn't see them separate. Even if I add 2. Whatever I set on the first the second replicate.
@clindsell611118 күн бұрын
hey so i got a new pc and my fans were all lighting up just fine and have randomly stopped and i cant fix it...help please
@fazemorize1958 Жыл бұрын
i love ur vids keep it up
@s_s_j21-psn533 ай бұрын
I can’t get my fans to synchronize or find them on the thing
@pavelbog4230 Жыл бұрын
what about keyboard and like led lights behind my monitor?
@PotatoProd.899 ай бұрын
yes please answer this, is it possible to get some random led strip that uses usb for power but has a remote, and create a custom strip on signal rgb without having a rgb controller, and if I do need a controller, how would I do that, and would I need rgb or ARGB controller?
@jesiel.ribeiro Жыл бұрын
Best RGB program that exists, there is only one detail that bothers a little, the fact that I cannot change the language, I live in Brazil with Portuguese as a native language, it would be great to be able to change the language, this program would be a success around here. RGB here in Brazil is fever for many. Help us with this problem. Solving this the program will be used a lot here. Hugs.
@ballstickler69696 ай бұрын
This tutorial was great Im just wondering how i connect components like my keyboard and LED strips that go behind my monitor, I would really appreciate the help
@bayerphotos26 күн бұрын
Any way to invert Y axis? 😢
@HUERITO8183 ай бұрын
I accidentally downloaded asrock rgb and now my fans don’t light up and signal rgb doesn’t show them
@mikeg73137 ай бұрын
how do i identify my fans? i only see in the middle of my fans say ibuypower
@Gulix1 Жыл бұрын
Can U make it fork for Glorious Model o
@artdoesntlikeme9 ай бұрын
Hi I have an ausen fan argb controller, I also have 10 fans that 3 of them have configured in SignalRGB which are lian li aio fans But the other fans are coolmoon wich are connected into my ausen argb controller which is not supported in SignalRGB but the problem is that SignalRGB does not recognize my ausen argb controller so I could be able to confirm my fans Is there any way that i can make it work? Can I make it work by creating a custom strip just like the way that you showed in this video? Also I have an red dragon k552 that isn't supported as well what can i do for that one ?
@artdoesntlikeme9 ай бұрын
Please answer 🙏
@PotatoProd.899 ай бұрын
is it possible to connect some random led strip that uses usb for power but has a remote, and create a custom strip on signal rgb without having a rgb controller? if I do need a controller, how would I do that, and would I need rgb or ARGB controller? Please help
@LiuProJiaJie18 күн бұрын
Best software!!!!!!
@fonty0124 ай бұрын
WE NEED A TUTORIAL FOR THE TUTORIA
@fonty0124 ай бұрын
cannot recofnise my D3-120, from the Nv7 case, how to connect
@roybryancallefernandez12944 ай бұрын
Para que controle todo el rgb debo desinstalar los software armoury create y lian li?
@XxJoRockyxX6 ай бұрын
my fan controllers aren't being detected, can anyone help?
@bpro58485 ай бұрын
same
@gregzy789_gaming46 ай бұрын
How can you put two static colours on fans? I am using Corsair ll120’s
@mikeg73137 ай бұрын
my fans all turned their rgb off jelp, i ony disabled the re enabled the device on signal rgb
@deciopires715911 ай бұрын
it works with cooler master controllers, because that one connect on usb header and not argb header???
@RexxyJake11 ай бұрын
I have a Corsair Icue H60x elite liquid cooler. I’ve had problems with it since I installed it. It just flashes constantly.
@Ice-mk6ii Жыл бұрын
Could I still control the colour of the fans, even though I don't know the fan model? No. Or name?( I have the msi gungir 110r case. It came with r fans, and I don't know what it's called)
@youre_boy_cookie Жыл бұрын
my muse is the only fing i can do but it dont work
@Lil_C_Bass Жыл бұрын
Could you daisy chain multiple argb fans to one motherboard header and individually address each one? I feel like that’s what the video showed but I want to double check
@SignalRGB Жыл бұрын
Yes thats what I did with the lian li fans
@NEA1413 Жыл бұрын
@@SignalRGB This method does not work for me so far with Fractal Aspects daisy chained to one header.
@seaneckhart9914 Жыл бұрын
@@SignalRGB Does not work at all
@SignalRGB Жыл бұрын
@@NEA1413 are they daisy chained or do you have a splitter, thats two different things
@deathcultcreative1447 Жыл бұрын
@@SignalRGB hello i have the same problem with 3 in 1 sickleflow 120 fans, the argb header is reading all 3 as 1 fan. They are daisy chained. and i loaded 3 fans per channel in the components section. What step am i missing to address them individually. thank you! love the software regardless
@tombroenink7143 Жыл бұрын
Could u also control the 4 pin rgb headers separately ?
@seaneckhart9914 Жыл бұрын
SignalRGB website says you cant control your devices separately with a splitter cable but what about one of those Chinese brand hub using a 3 pin argb cable instead of usb to connect to the motherboard?
@zesty7045 Жыл бұрын
i chose static and forgot where it was and when i am on youtube it flashes and i want to change it so it doesnt do a flash when watching a youtube video
@eevbio950 Жыл бұрын
Cooooool
@HUERITO8183 ай бұрын
None of this shows up for me. I fucked up and added the motherboards RGB app. And now the signalrgb doesn’t recognize my pcs rgb. Now non of my rgb work. HELP!!! (I’m new to pc) 😭
@chills_tiny_mom2 ай бұрын
what do you mean by "limited frame rate" on the lian li fan controller?
@SignalRGB2 ай бұрын
Thats the limitation of their firmware when the rgb is controlled directly through usb.
@astr0nixz418 Жыл бұрын
I will do anything to get this PC if the tutorial is explained so well like this
@bobpelingon9940 Жыл бұрын
Hi can you mix motherboard control ARGB and Razer Addressable RGB Controller in SignalRGB?
@oskartorres8408 Жыл бұрын
My pump Is not detected Is a masterliquid illusion but It controlls as Is only 1 halo masterfan
@Pipboy83 Жыл бұрын
Can anyone please help me? I only have the option of channel 1... yet i have 6 fans, is there a way to add more channels? Thanks in advance
@SignalRGB Жыл бұрын
You can add the number of fans onto the channel, keep pressing the + button and add them, the controller only has one channel with 6 fans connected onto it. Thats how that works.
@Pipboy83 Жыл бұрын
@@SignalRGB Thanks for the reply, but i just cant seem to get them to work :( I am using the corsair lighting node core.. with 6 SP120 rgb pro fans
@SignalRGB Жыл бұрын
@@Pipboy83 select 6 sp120 pro fans in channel 1, then configure them in the layouts tab
@Pipboy83 Жыл бұрын
@@SignalRGB Only one fan is working, the rest are doing there own thing, wont flash when i click them etc
@SignalRGB Жыл бұрын
@@Pipboy83 Take a video and paste a link here of how its all setup
@DemonSliime Жыл бұрын
It makes no sense at all. My motherboard pops up, which doesn’t even have rgb. And then it says that I have nothing connected to jrainbow1 and jrainbow2 when those are literally the only two ports that rgb connected to them.
@xXPoorCalangoXx Жыл бұрын
why i have a rgb keyboard and i cant use
@therdstoneover10 ай бұрын
How did you get your case to show up under devices??
@ianremer5248 Жыл бұрын
i cant find the option to configure the controller
@berndscholten25 күн бұрын
how do i add my componnents to the software i jusrt dont understand how
@SignalRGB25 күн бұрын
@@berndscholten Exactly as described in the video
@imnottheoneyourelookingfor5 ай бұрын
None of these buttons work for me. Does this only work with a paid subscription??
@SignalRGB5 ай бұрын
This part is free, whats not working?
@TheParachutingCat Жыл бұрын
i have the be quiet light wings 120mm pwm and when i connected that to the channel it controls everything and not 1 fan
@SignalRGB Жыл бұрын
The be quiet one is a hub not a controller so it just mirrors the same thing across all fans
@TheParachutingCat Жыл бұрын
@@SignalRGB oh ok
@goheadcuz16187 ай бұрын
I have apevia fans an they're not on the list in devices for custom strips, what do I do? All of my fans argbs were working, but now only the front does. This only started when I got rid of all my other argb software other than openrgb. Just fyi: My front fans argbs work but my top 2 aio fans argbs, the pump argbs and back case fans argbs don't. I have the front case fans on 1 argb header, the pump on another, and the top 2 aio and the back case fan on another argb header. The problem is that signal is only detecting one argb header and not the other 2, BUT it was detecting them before I uninstalled polychrome, chroma, razer, ect. I could probably fix this by connecting them all to my splitter in the back and then to the argb header but I keep them on separate ones for custom designs in open rgb. Is there anyway I can get signal to detect all of them or do I have to do that? Cause I really really like all the extra options in signal an will probably use that overall, but yea I love openrgb for my own custom designs by changing the individual leds themselves.
@TwoTone332 ай бұрын
My fans arent even showing up :(
@lukatodorceski6993 Жыл бұрын
hi i have a problem when i go to my device it dosent show anything
@246Dron Жыл бұрын
Hello. This program does not see the asus tuf gaming k1 keyboard
@NBWDOUGHBOY9 ай бұрын
Can you connect an NZXT Hue 2 box?
@goofyniki Жыл бұрын
so does this work if you have rgb and argb fans connected to your motherboard?
@Add1cting5 ай бұрын
my key board wont show up
@joesmith4477 Жыл бұрын
Is there a way to turn lighting off when the system is idle or when the display is turned off? I would love to see this feature
@TheRizzler86 Жыл бұрын
Sleep turns them off
@MikeyZ5166 ай бұрын
this wont work with a nzxt kraken enite or am i mistaken? (lcd screen)
@DemonSliime Жыл бұрын
I have all my fans hooked up to rgb controller and it will not connect to them. I know it’s possible bc it’s the only thing mystic lights lets me control. All my parts are msi except the ram. And zero programs allow me to control it all together. I just don’t understand at all. None of this makes any sense they’re plugged in. Just tell me how to make it so I can control all my rgb at once. It’s all argb, it all says it’s compatible with MSI’s Mystic light literally on the box. Is it the controller? The controller is plugged into jrainbow1, do I have to plug it into jrgb1? Like I really don’t get it. It’s all connected. For about half a second I was able to switch all the fans at the same time, but now I can’t no matter what I do and I haven’t changed any of the hardware whatsoever. It’s literally just one second they all did what I wanted them to and the ram did not, and the next second none of them would do anything. And now, after fucking around with the program for a little while, I have found that it recognizes the msi mystical light controller, and all it’s connections, in the layout tab but not the devices tab. Like the fuck. How am I supposed to know how many LEDs are connected to that? Also, none of the fans connected to the controller flash any sort of color in configuration. They don’t show up as connecting in the devices tab at all.
@i_am_fou Жыл бұрын
what pc parts are used in the pc please tell me
@nealvang9114 Жыл бұрын
My fans arent even pulsing for my rgb controller
@meecob11 ай бұрын
does this work with rainbow1 and 2 headers ? - the fans don't appear! using msi pro 610 G Wifi
@tylab20706 ай бұрын
But on divices there is only my ram and keyboard on the bottem
@SignalRGB6 ай бұрын
Other stuff could be unsupported or not connected correctly or using an unsupported controller or could also be using a basic uncontrollable hub
@xXPoorCalangoXx Жыл бұрын
bro my razer mouse dont have rgb and show in the app but my Nplay keyboard have rgn dont show
@Yt_hastefn2 ай бұрын
My rgb hub isnt showing up how do i get it to show?
What about my Wireless Corsair Void Pro? In the app it says is not supported but in the website it says it is. Also if I use icue to control my headset equalizer will I loose that?
@vLitoo6 ай бұрын
Yes
@KrisGigaTiss Жыл бұрын
My cooler master and motherboard wont get detected in any system, can someone help me?
@cachalotreal11 ай бұрын
Does it work with any fan with lights
@TpediaTv Жыл бұрын
please is there a fix for aorus x470 ?
@matteosesar289 Жыл бұрын
I've been able to pair up my mouse, razor keyboard, RAM, Graphics card etc but I'm having trouble pairing my Phanteks 120sk to my motherboard and pairing my Deepcool storm castle 360 CPU cooler. Can anyone give me some advice??? My motherboard is the Gigabyte Z590 AORUS ELITE and I use the Phanteks Eclipse P400A case.
@chrissdevano Жыл бұрын
Does this work with any rgb led controller, or only with some of them? I have seen some controllers marketed as "addressable" rgb led controller, but I don't know the difference.
@DemonSliime Жыл бұрын
It doesn’t work with whatever controller that comes on the MSI mpg velox case. I’m not gonna lie my guy, unless you’re a super Uber pro at building computers, it’s gonna be almost impossible to get all your RGB working with a single program.
@sippinsyrup Жыл бұрын
Why doesnt my Hyperx QuadCast s connect?
@smaldevill Жыл бұрын
Can you please support boostboxx? The fans don't work with SignalRGB for me
@vincentlunel8350 Жыл бұрын
Can someone help me with this plz. My RGB fans aren't working anymore. I don't don't know how to fix it. The first time I installl SignalRgb it detects all my devices and my fans on the front where flashing blue and they where working. And I don’t know why since, they just stop doing light. ANd when I uninstall SingalRGB et re-install, they’re where not flashing blue anymore. If someone can help me to fix this plz. Thank you very much.
@v1nne919 ай бұрын
None other devices then my mouse shows at the bottom, why?
@SignalRGB9 ай бұрын
Could be that they aren't supported yet. You can try to contact support@signalrgb.com
@NEA1413 Жыл бұрын
Do you NEED a fan hub to control the seperate fans in the devices tab? Because I currently have 3 Fractal Aspects daisy chained directly onto the MoBo header and Signal RBG sees it as one fan.
@SignalRGB Жыл бұрын
Did you verify that once you set them as three separate fans in components that you also went into layouts and moved them around?
@Iconic111113 ай бұрын
@@SignalRGB Sir do i need controller to control each fan seprately of 360mm AIO which are obviously connected in daisy chain or is it ok to plug onto motherboard's header and configure them as 3 different fans in device and layout section?
@banefury Жыл бұрын
is there a way to separate motherboard lights and the fans which are connected to the motherboard?. my aorus lights are dim and its connected to the fans when i adjust it.
@SignalRGB Жыл бұрын
Contact support@signalrgb.com
@ralphlee893311 ай бұрын
Im having a hard time syncing my Deepcool FC120 Fans to my ASrock B550M Pro4. I'm not using any controller besides the motherboard 5v ARGB Header, and it isn't syncing although it is compatible. Appreciate the help.
@cj4x2642 ай бұрын
Having the same problem did you ever end up figuring it out?
@oBick_mc Жыл бұрын
my fans are not showing up i have Corsair Ml120
@germainen3al Жыл бұрын
I cant get my corsair m65 to sync and is there a way to connect my corsair h150i pro even tho i know its a single color rgb it still would be nice to have everything matching
@Gulix1 Жыл бұрын
is this a scam?
@reignman.7555 Жыл бұрын
I dont use signal rgb bcas i have lian li AL120 unifans,and i cant find thoes type of fans in signal rgb. They have SL120 but not AL 120.
@SignalRGB Жыл бұрын
You can just select a fan with same amount of leds
@astroboylol Жыл бұрын
How do you find out what components your pc has if you didn't build it?
@throwyminecraft3873 Жыл бұрын
did you find out
@louislouis27109 ай бұрын
Hi, i got a msi chassis with an integrated argb controller which i pluged into my argb port on the mobo so when i open devices i don't see this controller but only the 2 argb ports of the mobo. My controller is plugged in the 2nd argb port and when i add all the devices that are plugged in and then i go to layout, it doesn't matter how i place them bc they seem to be all linked to the waterblock on the layout which is the first device i configured on this channel. Does it means that i can't control them separatly or did i do a mistake while configurating ? My chassis is the Msi mag forge 100m
@SignalRGB9 ай бұрын
it means that the msi controller is just mirroring everything and thats a limitation of the controller. Most likely its not a controller but its actually just a hub.
@alansutherland6663 Жыл бұрын
The video explains everything really well, but none of my components have a configure button, only the lightbulb and cog. HELP
@SignalRGB Жыл бұрын
RGB Controllers and Motherboards will have a configure button, but devices like keyboards, mice, etc don't need one. Are you sure you aren't mixing that up?
@alansutherland6663 Жыл бұрын
@@SignalRGB yeah, my motherboard is the part I can’t configure because there’s no button. My ram and keyboard work fine, but my mobo rgb and all of the headers don’t work
@SignalRGB Жыл бұрын
@@alansutherland6663 Which motherboard?
@alansutherland6663 Жыл бұрын
@@SignalRGB msi MAG X570 tomahawk WiFi
@sanderssmokes Жыл бұрын
I have a bunch of fans hooked up to 1 controller and it changes all the fans at the same time
@SignalRGB Жыл бұрын
kzfaq.info/get/bejne/o9qpetCDm7GsY5c.html
@Grafiix_ Жыл бұрын
How did u get the special adapter rgb cable ? Or what's it called so I can purchase it for mine
@SignalRGB Жыл бұрын
Check the video description
@Iconguy244 ай бұрын
@@SignalRGB can you suggest any other adopter cable from famous brand bcoz i dont think this one available around the globe...by this method i dont need costly controller if i have 3 headers in my Mobo(one for AIO's 3 fans second for 3 front fans of case and third for 2 bottom & 1 rear fan...am i right sir?
@numbone Жыл бұрын
While using a rgb splitter all the fans are detected as one fan no matter what I try
@SignalRGB Жыл бұрын
Thats exactly what I said in this video. You can’t have individual control if you use a splitter.
@RileyTheBetter1 Жыл бұрын
I don't know why but some of my parts are connected but like half my fans and aio is not even like there what should i do?
@SignalRGB Жыл бұрын
Probably means your devices are not supported yet.
@RileyTheBetter1 Жыл бұрын
@@SignalRGB oh ok thank you for the info
@RileyTheBetter1 Жыл бұрын
@@SignalRGB wait that dose not make sense i have 3 fans connected but there are the other 6 that are not could it be the controller? they are all of the same fans
@SignalRGB Жыл бұрын
@@RileyTheBetter1 Did you follow the steps exactly as they appear in our tutorials? You need to configure what is connected to the controller and then adjust your devices in the layouts tab after that.
@RileyTheBetter1 Жыл бұрын
@@SignalRGB ok i got it working thank you so much the only thing that is not working is the li and lan strummers and thank you again for the help i am new to this whole pc gaming thing
@fearless69x52 Жыл бұрын
i wanna know that your custom pc giveaway has any charges for delivering in other country because i live in Pakistan and i entered in your custom pc giveaway please answer me