I've been putting off taking the running boards off mine, because I have small kids, and they use them to get into and out of the truck. Now seeing yours, I may replace mine with something like yours. Thank you so much for all the great videos!
@charlesandhudson3 жыл бұрын
I just ordered the same sliders with a back diamond plate for the kids. Will be easier for them to climb in and less likely their foot will get stuck.
@ryanandaprilpaine8853 жыл бұрын
Thank you for the video, helped me install mine. Waited 3 months for them to show up, but worth the wait.
Nice!!! I use the frequently as steps to access the roof rack. Hopefully they will be used for their intended purpose soon!
@adrianabshire3 жыл бұрын
Good Job! This is on my list now - thanks!!!
@willmtaylor4 ай бұрын
Hey Chow, you may never check comments on old videos, but wanted to check in & see how they’re holding up a few years later.
@lawnmower113 жыл бұрын
Nice!!!! Exact ones I want
@T25de2 жыл бұрын
Getting near for our LX to get sliders!
@harshjay Жыл бұрын
bummer, I was here for an AHC + slider install video...
@CheChener3 жыл бұрын
👍👍👍
@chowcares3 жыл бұрын
👍👍👍
@carlolopez75792 жыл бұрын
They look owesom, where can i buy ones for my 100 series land cruiser? Thankyou for the viedo.
@chowcares2 жыл бұрын
Whiteknuckleoffroad.com
@flj2323 жыл бұрын
Look great. Are you running wheel spacers on those stock wheels?
@chowcares3 жыл бұрын
Yup yup! 1.25” all around. Video on my setup dropping tuesday
@Miu_Tube3 жыл бұрын
Did you get the HREW or DOM steel type?
@HBButler013 жыл бұрын
So time to figure out the best time to go buy sliders from them at a discount lol
@chowcares3 жыл бұрын
Lol yuuuup
@jeremiahpetrosky70013 жыл бұрын
I got them black Friday 10% off. Covered shipping. Lol
@merbesfield3 жыл бұрын
Do you know if the original front fender mud flaps would work with these? Or a way to customize them to fit the sliders?
@chowcares3 жыл бұрын
I don’t have mine anymore, but there looks like enough space that they should fit
@randyrabidoux9291 Жыл бұрын
Any special trick you recommend for bending the brake line (or AHC lines)?
@NKPGarage2 жыл бұрын
Great detailed video. How do you like the sliders now that you have had them for a year?
@Maximus017762 жыл бұрын
NKP Garage, white knuckle is one of the best companies out there, quality is excellent and great customer service, you cannot go wrong if you choose their products
@NKPGarage2 жыл бұрын
@@Maximus01776 I've had the Slee sliders and Metal Tech 4x4 sliders on previous 80's. Never tried the WK sliders. Great to know they're well made also.
@sparkythecorgi6123 жыл бұрын
Are these the standard or reduced angle White Knuckle sliders? I'm trying to decide which way to go so I can order a set. thanks
@chowcares3 жыл бұрын
Standard
@yayynance11 ай бұрын
Is the logo on the sliders stickers or paint??
@adventureswithsteve42783 жыл бұрын
I’m looking at a 2002 Toyota Land Cruiser 100 series and it has height height control on it. What are your thoughts? It has 120,000 miles and is diesel 1hd fte
@TheDarkmark793 жыл бұрын
Any reason you ended up with these vs some others on the market? I’m between these and Slee
@chowcares3 жыл бұрын
They’re both great brands, specs are almost the same. WK got me with that 15% Black Friday sale and local pickup
@MissouriAdventures3 жыл бұрын
If you had a welder would you consider welding them on to your LC?
@chowcares3 жыл бұрын
I thought about it, not sure. Welding would be stronger but if I wanted to change it up later... 🤷🏻♂️
@cayman98733 жыл бұрын
You might sell the truck to someone that does not want sliders.. and bolts can be easier than welding. I would do it the same way you did.
@cayman98733 жыл бұрын
Wow your under truck video looks fantastic.. good light helps a lot. You do great work capturing video The fit of the slider to the truck seems excellent. You moving the brake line was a smart move. And kerping the hardware loose until in place was smart. Did you consider using nylocks instead of the split locknuts. Nylocks are better in my opinion. Did you use some anti seize on the bolts for future projects ? What is the rough street price ?
@cayman98733 жыл бұрын
What year is your 100 series ?? It looks in really great shape
@thelandcruiserproject3 жыл бұрын
Mine are welded on and I've got a couple things for you to consider. There are a few nooks and crannies in the welds that need some paint/touch up. With them welded to the truck, it's impossible to get that corrected. The way mine were welded on, they covered a bolt hole for one of the underbody trays. Not a big deal unless you want an aftermarket skid plate that uses that hole. Mine can always be cut off and re-welded, but it's just more of a pain.
@jap3233 жыл бұрын
Is it just me or these U bolts look a little weak?
@chowcares3 жыл бұрын
Seems ok 🤷🏻♂️
@urbanturbine3 жыл бұрын
i think they look fine...
@christophermichaelcarpio6910 Жыл бұрын
Will this work with a 1st gen sequoia?
@Luckystudio133 жыл бұрын
How are the sliders holding up so far ?
@DanA-us6qv2 жыл бұрын
How did you bend that brake line?
@chowcares2 жыл бұрын
With my 🙌, they’re not too stiff
@nickpiring47539 ай бұрын
Are these the angled or straight?
@willmtaylor4 ай бұрын
Those are the angled-you can see it around the 9:45 mark.